From: Phil Schwan <pschwan@thepuffingroup.com>
To: parisc-linux@thepuffingroup.com
Subject: [parisc-linux] [grundler@puffin.external.hp.com: commit FP coproc enable code?]
Date: Fri, 1 Oct 1999 15:12:06 -0400 [thread overview]
Message-ID: <19991001151206.H17134@thepuffingroup.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 99 bytes --]
[ I think I've fixed the mailing list; here's the mails from Grant
that it was dropping --phil ]
[-- Attachment #2: Forwarded message from grundler@puffin.external.hp.com --]
[-- Type: message/rfc822, Size: 7101 bytes --]
From: grundler@puffin.external.hp.com
To: parisc-linux@thepuffingroup.com
Subject: commit FP coproc enable code?
Date: Fri, 1 Oct 1999 11:25:50 -0600
Message-ID: <199910011724.LAA09983@puffin.external.hp.com>
[ 4th try...I'm not getting a copy back from the reflector...]
Hi all,
I'd like to commit changes to enable FP coproc for PA 1.1 arch.
Any objections?
o FP enable via writing cr10 (CCR) register. Not doing this the "right"
way - which is to use PDC_COPROC but it will work for all PA1.1
platforms.
o remove extraneous console output. I want to post console output
for my next problem: kernel panic when trying to kill idle_task.
thanks,
grant
Index: linux/arch/parisc/kernel/head.S
===================================================================
RCS file: /home/cvs/parisc/linux/arch/parisc/kernel/head.S,v
retrieving revision 1.32
diff -u -r1.32 head.S
--- head.S 1999/08/31 19:25:23 1.32
+++ head.S 1999/09/30 22:43:03
@@ -295,9 +295,20 @@
ldil L%KERNEL_PSW,%r10
ldo R%KERNEL_PSW(%r10),%r10
mtctl %r10,%ipsw
-
- mtctl %r0,%cr17 ; Clear two-level IIA Space Queue
- mtctl %r0,%cr17 ; effectively setting kernel space.
+
+ ; Just assume we have an FP coprocessor and assume firmware
+ ; did not enable it.
+ ; Pass what firmware set CCR (cr10) to start_parisc() and print it.
+ mfctl %cr10, %arg2
+
+#define FP_COPROC_ENABLE 0xc0
+ ldil L%FP_COPROC_ENABLE,%r10
+ ldo R%FP_COPROC_ENABLE(%r10),%r10
+ mtctl %r10,%cr10 ; CCR
+
+
+ mtctl %r0,%cr17 ; Clear two-level IIA Space Queue
+ mtctl %r0,%cr17 ; effectively setting kernel space.
ldil L%start_parisc,%r10
ldo R%start_parisc(%r10),%r10
Index: linux/arch/parisc/kernel/setup.c
===================================================================
RCS file: /home/cvs/parisc/linux/arch/parisc/kernel/setup.c,v
retrieving revision 1.59
diff -u -r1.59 setup.c
--- setup.c 1999/09/28 22:34:57 1.59
+++ setup.c 1999/09/30 22:43:15
@@ -587,13 +587,16 @@
#define PA(x) (void *)((unsigned long)(x)&~0xc0000000)
extern int pdc_call_x(void *,...);
+#if 0
static char iodc_tbuf[4096] __attribute__((aligned(4096))) = "Hallo\n";
static char iodc_rbuf[4096] __attribute__((aligned(4096))) = "Hallo\n";
+#endif
__initfunc(void start_parisc(unsigned long new_memory_start,
- char *bootloader_command_line))
+ char *bootloader_command_line,
+ unsigned long ccr))
{
-#if 1
+#if 0
pdc_call_x(
(void *)PAGE0->mem_cons.hpa, ENTRY_IO_COUT,
PAGE0->mem_cons.spa, PAGE0->mem_cons.dp.layers,
@@ -613,28 +616,24 @@
pdc_console_init();
printk("The Kernel has started...\n");
+#if 0
printk("Hmm\n");
printk("%d\n", 7);
printk("%d\n", *(unsigned *)0xc0000000);
-
+#endif
printk("%p\n", bootloader_command_line);
printk("You are running a %dMHz PA-RISC-Machine with %dMB of RAM.\n",
((int)PAGE0->mem_10msec/10000), PAGE0->imm_max_mem>>20);
+ printk("FP CCR was set to: 0x%x\n", (int) ccr);
parisc_memstart = new_memory_start;
pdc = PAGE0->mem_pdc;
- printk("You are running a %dMHz PA-RISC-Machine with %dMB of RAM.\n",
- ((int)PAGE0->mem_10msec/10000), PAGE0->imm_max_mem>>20);
-
if (bootloader_command_line)
strcpy(saved_command_line,__va(bootloader_command_line));
else
saved_command_line[0] = 0;
- printk("You are running a %dMHz PA-RISC-Machine with %dMB of RAM.\n",
- ((int)PAGE0->mem_10msec/10000), PAGE0->imm_max_mem>>20);
-
printk("Free memory was at 0x%08lX (=stackbase, stacksize=0x%08lX).\n",
new_memory_start,(unsigned long)KERNEL_STACKSIZE );
@@ -659,7 +658,7 @@
#endif
initrd_below_start_ok = 1;
- printk("initrd: %08x-%08x\n", initrd_start, initrd_end);
+ printk("initrd: %08x-%08x\n", (int) initrd_start, (int) initrd_end);
*memory_start_p = parisc_memstart;
*memory_end_p = 0xc2000000;
Index: linux/drivers/block/rd.c
===================================================================
RCS file: /home/cvs/parisc/linux/drivers/block/rd.c,v
retrieving revision 1.3
diff -u -r1.3 rd.c
--- rd.c 1999/09/22 18:10:17 1.3
+++ rd.c 1999/09/30 22:43:26
@@ -219,7 +219,6 @@
{
int left;
- printk("initrd_read\n");
left = initrd_end - initrd_start - *ppos;
if (count > left) count = left;
if (count == 0) return 0;
Index: linux/fs/buffer.c
===================================================================
RCS file: /home/cvs/parisc/linux/fs/buffer.c,v
retrieving revision 1.3
diff -u -r1.3 buffer.c
--- buffer.c 1999/09/22 18:10:35 1.3
+++ buffer.c 1999/09/30 22:44:21
@@ -840,8 +840,6 @@
struct buffer_head * bh;
- printk("bread bh=%08x\n", bh);
-// printk("%08x\n", &buffer_page(bh)->flags);
bh = getblk(dev, block, size);
if (buffer_uptodate(bh))
return bh;
next reply other threads:[~1999-10-01 18:44 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-10-01 19:12 Phil Schwan [this message]
1999-10-01 18:56 ` [parisc-linux] commit FP coproc enable code? Philipp Rumpf
1999-10-01 20:52 ` Grant Grundler
1999-10-02 6:03 ` Jeffrey A Law
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=19991001151206.H17134@thepuffingroup.com \
--to=pschwan@thepuffingroup.com \
--cc=parisc-linux@thepuffingroup.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.