From mboxrd@z Thu Jan 1 00:00:00 1970 Message-Id: <199910121816.AA26719@mailgate1b.telekom.de> From: Heinz Mauelshagen Subject: Re: [linux-lvm] LVM & Raid Date: Tue, 12 Oct 1999 20:15:29 METDST In-Reply-To: <199910031148.NAA24977@seger.axis.se>; from "Lars Segerlund" at Oct 03, 99 1:48 pm Sender: owner-linux-lvm Errors-To: owner-linux-lvm List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Lars Segerlund Cc: mge@ts1.ez-darmstadt.telekom.de, linux-lvm@msede.com Hi Lars. > > I'm having trouble setting up lvm on a raid5 array ( /dev/md0 ), > my trouble is that pvscan doesn't find it, ( how in the heck > do I label a raid partitium so that pvscan vill recognize and vgcreate > will think of it a partitiun ?? ) You don't have to 'label' it. Just say "pvcreate /dev/md0" and "vgcreate Idontknow /dev/md0". pv_read_all_pv() should find your /dev/md0 after you did that pvcreate on it. But... Because pv_read_all_pv() relies on the /dev setup, you might suffer from some unusual /dev/md* entries. Please check them and run "pvscan -d" looking for /dev/md* hits. Look what pvscan thinks of them please. > > I have been running lvm with raw disks, but now I seem a bit stuck. > > By the way it's an alpha and v0.7. 2.2.12 > Regards, Heinz -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Systemmanagement CS-TS T-Nova Entwicklungszentrum Darmstadt Heinz Mauelshagen Otto-Roehm-Strasse 71c Senior Systems Engineer Postfach 10 05 41 64205 Darmstadt mge@ez-darmstadt.telekom.de Germany +49 6151 886-425 FAX-386 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-