From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Mon, 18 Oct 1999 12:13:53 -0700 From: "David N. Welton" To: linuxppc-dev@lists.linuxppc.org Subject: Re: Kernel questions Message-ID: <19991018121353.D17058@bassano.linuxcare.com> References: <19991018105201.B17058@bassano.linuxcare.com> <19991018205334.031557@mailhost.mipsys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <19991018205334.031557@mailhost.mipsys.com>; from Benjamin Herrenschmidt on Mon, Oct 18, 1999 at 08:53:34PM +0200 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: On Mon, Oct 18, 1999 at 08:53:34PM +0200, Benjamin Herrenschmidt wrote: > > On Mon, Oct 18, 1999, David N. Welton wrote: > >1) Why does everything seem to want to access NVRAM things? I've > > found it scattered in several places throughout the kernel, such as > > matroxfb.c. > Mostly to find out the video mode last set by MacOS. It doesn't > always works since new MacOS versions may no longer put the mode > where it used to be. It's also used by the PMU code on some > PowerBooks to read the current backlight setting. Well, supposing one doesn't have a Macintosh or MacOS, then this stuff is basically useless, no? At least for how it's being used currently. > >3) Why does pmac_support.c assume that you have ADB stuff compiled in? > > All pmacs have an ADB controller, even if it's not visible (they have at > least the controller). Some pmac-specific calls go thru /dev/adb even > when you don't have anything on the ADB bus for historical reasons, like > userland access to the real time clock (ioctls). The new UMA machines > still have various ADB calls implemented in the PMU (and used by the iBook). Once again, I don't have a pmac... > >nvram_read_byte contains: "struct adb_request req". > > > >If I have understood correctly, ADB is an Apple thing, and really > >shouldn't have anything to do with my RS6000. Is this correct? > Yes, it's correct. However, I beleive the kernel is compiled to boot > on CHRP _and_ PowerMacs, and so the ADB support is needed. Also, the > CHRP definition states that CHRP machines can have an ADB controller > too. There are a few options: PowerMac Prep/MTX CHRP PowerMac/PReP/CHRP Gemini APUS I'm compiling as CHRP, and since ADB is selectable as an option, it seems it could be added in anyway, pmac or not? So would it be a worthwhile endeavour to try and ifdef this stuff out, for those of us who don't need it? Thanks, -- David N. Welton, Developer, Linuxcare, Inc. 415.354.4878 x241 tel, 415.701.7457 fax dwelton@linuxcare.com, http://www.linuxcare.com/ Linuxcare. At the center of Linux. ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/