From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.8.7/8.8.7) with SMTP id OAA13301 for ; Thu, 21 Oct 1999 14:56:26 -0600 Received: from udlkern.fc.hp.com (root@udlkern.fc.hp.com [15.1.52.48]) by hpfcla.fc.hp.com (8.9.1/8.9.1) with ESMTP id OAA12768 for ; Thu, 21 Oct 1999 14:57:21 -0600 (MDT) Received: from debian.fc.hp.com (root@debian.fc.hp.com [15.1.48.119]) by udlkern.fc.hp.com with ESMTP (8.8.6 (PHNE_14041)/8.7.1) id OAA23116 for ; Thu, 21 Oct 1999 14:57:20 -0600 (MDT) Received: from debian.fc.hp.com (bame@localhost [127.0.0.1]) by debian.fc.hp.com (8.9.3/8.9.3/Debian/GNU) with ESMTP id OAA19923 for ; Thu, 21 Oct 1999 14:57:20 -0600 Message-Id: <199910212057.OAA19923@debian.fc.hp.com> To: parisc-linux@thepuffingroup.com Date: Thu, 21 Oct 1999 14:57:20 -0500 From: Paul Bame Subject: [parisc-linux] Boot messages from C3000 console List-ID: This is long. Thanks to Alex Williamson for this - The short answer is once control is apparently transferred to the kernel, the system dies hard. Someone who can read PIM dumps might deduce more from this log. -Paul Bame Information Menu: Enter command > io I/O MODULE INFORMATION IODC IODC Path Decimal Type Location HVER SVER Vers Dep - ------------ ----------- --------------------- ---------- ---- ---- ---- ---- LAN 10/0/12/0 Ethernet built-in 0060 a200 0x02 0x00 AUDIO 10/0/13/0 Audio built-in IDE 10/0/14/0 IDE built-in 0060 a300 0x00 0x00 SUPERIO MISC 10/0/14/1 Bridge Device built-in SERIAL_1 10/0/14/1/1 RS232 Port built-in 0060 8c00 0x01 0x00 SERIAL_2 10/0/14/1/2 RS232 Port built-in 0060 8c00 0x01 0x00 PARALLEL 10/0/14/1/3 Parallel Port built-in USB 10/0/14/2 USB built-in 0060 a900 0x98 0x00 SCSI 10/0/15/0 SCSI built-in 0060 a300 0x00 0x00 FWSCSI 10/0/15/1 SCSI built-in 0060 a300 0x00 0x00 GRAPHICS(2) 10/6/2/0 Display slot 2 0070 8500 0x01 0x00 Information Menu: Enter command > ma - ----- Main Menu ------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT|CON|KEY] [] Display or modify a path SEArch [DIsplay|IPL] [] Search for boot devices COnfiguration [] Access Configuration menu/commands INformation [] Access Information menu/commands SERvice [] Access Service menu/commands DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system - ----- Main Menu: Enter command > bo lan.15.1.55.151 Interact with IPL (Y, N, Q)?> n Booting... Network Station Address 001083-354faa System IP Address 15.1.52.165 Server IP Address 15.1.55.151 Boot IO Dependent Code (IODC) revision 2 HARD Booted. - ------------------------------------------------------------------------------ PARISC/Linux Bootstrap Version 0.6 (non-interactive) By Helge Deller & Jason Eckhardt Built Thu Oct 21 12:03:52 MDT 1999 by bame@burmese Reading parameters...done. Loading PA-RISC/Linux Kernel... No ramdisks available. SOM-Kernel: aux_header_location: 00000080 som : 00200080 exec_dfile: 000DD000 exec_dsize: 00084000 exec_dmem : C00A9000 exec_tfile: 00044000 exec_tsize: 00098008 exec_tmem : C0010000 Code at 0x00010000, size=0x00098008 Data at 0x000A9000, size=0x00084000 BSS at 0x0012D000. Transferring control to kernel. (At entry point 0x00010000) Firmware Version 1.8 Duplex Console IO Dependent Code (IODC) revision 1 - ------------------------------------------------------------------------------ (c) Copyright 1995-1998, Hewlett-Packard Company, All rights reserved - ------------------------------------------------------------------------------ Processor Speed State Coprocessor State I/D Cache --------- -------- --------------------- ----------------- ------------- 0 400 MHz Active Functional 512 kB/1 MB Central Bus Speed: 120 MHz Available memory: 805306368 bytes Good memory required: 82538496 bytes Primary boot path: FWSCSI.6.0 Alternate boot path: SCSI.6.0 Console path: GRAPHICS(2) Keyboard path: USB CPU 0 WARNING: Self tests have been disabled as a result of FASTBOOT being enabled. To enable self tests, use the FASTBOOT command in the CONFIGURATION menu and reboot the system. WARNING: Memory has been initialized, but not tested as a result of FASTBOOT being enabled. To test memory, use the FASTBOOT command in the CONFIGURATION menu and reboot the system. Processor is starting auto boot process. To discontinue, press any key within 10 seconds. Boot terminated. ~`x - ----- Main Menu ------------------------------------------------------------- Command Description ------- ----------- BOot [PRI|ALT|] Boot from specified path PAth [PRI|ALT|CON|KEY] [] Display or modify a path SEArch [DIsplay|IPL] [] Search for boot devices COnfiguration [] Access Configuration menu/commands INformation [] Access Information menu/commands SERvice [] Access Service menu/commands DIsplay Redisplay the current menu HElp [|] Display help for menu or command RESET Restart the system - ----- Main Menu: Enter command > ser pim PROCESSOR PIM INFORMATION - ----------------- Processor 0 HPMC Information ------------------ Timestamp = Thu Oct 21 20:18:08 GMT 1999 (19:99:10:21:20:18:08) HPMC Chassis Codes = 2cbf0 2500b 2cbf5 2cbfc General Registers 0 - 31 00-03 0000000000000000 ffffffffffffffff 00000000000100c4 0000000000504000 04-07 0000000000504010 0000000000504000 0000000000000048 00000000f0002f88 08-11 0050427700000002 000000000000004d 000000000012c320 000000000000000a 12-15 0000000000000000 00000000ffffffff 0000000000000000 00000000f0400004 16-19 000000f0f00008a4 000000f0f0000160 000000f0f0000158 fffffffffff80810 20-23 0000000003000000 0000000000001000 0000000000000000 00000000000c0000 24-27 0000000000000000 0000000000000001 00000000c0159610 ffffffffc00a8000 28-31 ffffffffffffffff 00000000000ac948 00000000000ac400 0200000000000204 Control Registers 0 - 31 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 08-11 0000000000000000 0000000000000000 0000000000000000 000000000000003c 12-15 0000000000000000 0000000000000000 0000000000000000 0000000000000000 16-19 0000001d9f33c26d 0000000000000000 0000000000010184 000000000e601181 20-23 00000000a627ffff c0000000e0380810 0000000000000009 0000000080000000 24-27 00000000fdffffff 00000000ffffffff 0000000000000002 0000000008000009 28-31 00000000fdffffff 00000000ffffffff 00000000fdffffff 00000000fdffffff Space Registers 0 - 7 00-03 00000000 00000000 00000000 00000000 04-07 00000000 00000000 00000000 00000000 IIA Space = 0x0000000000000000 IIA Offset = 0x0000000000010188 Check Type = 0x20000000 CPU State = 0x9e000004 Cache Check = 0x00000000 TLB Check = 0x00000000 Bus Check = 0x0030103b Assists Check = 0x00000000 Assist State = 0x00000000 Path Info = 0x00000000 System Responder Address = 0x000000fffff80810 System Requestor Address = 0x000000fffffa0000 Floating-Point Registers 0 - 31 00-03 ffd00fbfffffffdf ffffffffffffffff ffffffffffffffff ffffffffffffffff 04-07 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff 08-11 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff 12-15 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff 16-19 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff 20-23 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff 24-27 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff 28-31 ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff 'B1000/C3000/J5000/J7000 Unarchitected (per-CPU)', revision 1, 140 bytes: Check Summary = 0xcb81041008000000 Available Memory = 0x0000000030000000 CPU Diagnose Register 2 = 0x0200000000000204 CPU Status Register 0 = 0x2420c20000000000 CPU Status Register 1 = 0x8002000000000000 SADD LOG = 0x0000000000000000 Read Short LOG = 0xc1af00fffff80810 ERROR_STATUS = 0x0000000000100010 MEM_ADDR = 0x000001ff3fffffff MEM_SYND = 0x0000000000000000 MEM_ADDR_CORR = 0x000001ff3fffffff MEM_SYND_CORR = 0x0000000000000000 RUN_DATA_HIGH = 0xc1bff0fffed08040 RUN_DATA_LOW = 0xc1bff0fffed08040 RUN_CTRL = 0x0000021c00001418 RUN_ADDR = 0xc1bff0fffed08040 System Responder Path = 0x00ffffffffffffff - ----------------- Processor 0 LPMC Information ------------------ Check Type = 0x00000000 I/D Cache Parity Info = 0x00000000 Cache Check = 0x00000000 TLB Check = 0x00000000 Bus Check = 0x00000000 Assists Check = 0x00000000 Assist State = 0x00000000 Path Info = 0x00000000 System Responder Address = 0x0000000000000000 System Requestor Address = 0x0000000000000000 - ----------------- Processor 0 TOC Information ------------------- General Registers 0 - 31 00-03 0000000000000000 000000f0f0093000 000000f0f000b658 00000000000f4240 04-07 00000020317d230d 0000000000000004 000000f0f0407aa8 0000000000000000 08-11 000000f0f0407aa8 000000000000004d 000000000012c320 000000000000000a 12-15 0000000000000000 00000000ffffffff 0000000000000000 00000000f0400004 16-19 000000f0f00008a4 000000f0f0000160 000000f0f0000158 000000f0f0077270 20-23 000000f0f05f0068 0000000000000004 0000000000000008 000000f0f003c3ac 24-27 0000000009f9c6f0 000000003d090000 0000000017d78400 000000f0f0412000 28-31 0000000017d78400 0000000000000008 000000f0f0407d68 000000f0f00772f0 Control Registers 0 - 31 00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 08-11 0000000000000000 0000000000000000 0000000000000000 0000000000000005 12-15 0000000000000000 0000000000000000 000000f0f0003800 0000000000000000 16-19 000000203b7aaa7c 00000000000000f0 000000f0f000b664 00000000020008b8 20-23 000000009237c3c1 0000000001c07d10 000000ff0809cf08 0000000080000000 24-27 00000000fdffffff 00000000ffffffff 0000000000000002 0000000008000009 28-31 00000000fdffffff 00000000ffffffff 00000000fdffffff 00000000fdffffff Space Registers 0 - 7 00-03 00000000 00000000 00000000 00000000 04-07 00000000 00000000 00000000 00000000 IIA Space = 0x00000000000000f0 IIA Offset = 0x000000f0f000b65c CPU State = 0x0000004d Memory Error Log Information: Timestamp = Thu Oct 21 20:18:08 GMT 1999 (19:99:10:21:20:18:08) 'B1000/C3000/J5000/J7000 Memory Error Log', revision 0, 64 bytes: No memory errors logged I/O Module Error Log Information: Timestamp = Thu Oct 21 20:18:08 GMT 1999 (19:99:10:21:20:18:08) 'B1000/C3000/J5000/J7000 IO Error Log', revision 0, 228 bytes: Rope Word1 Word2 Word3 - ------ ------------ ------------ 0 0x00000000 0x0e0cc009 0x00000000fed30048 1 0x00000000 0x1e0cc009 0x00000000fed32048 2 ---------- 0x2e0cc009 ------------------ 3 ---------- 0x3e0cc009 ------------------ 4 0x00000000 0x4e0cc009 0x00000000fed38048 5 ---------- 0x5e0cc009 ------------------ 6 0x00000000 0x6e0cc009 0x00000000fed3c048 7 ---------- 0x7e0cc009 ------------------ Main Menu: Enter command > - --------------6D46321F53F67470D064CBF0-- ------- End of Forwarded Message