From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.8.7/8.8.7) with SMTP id MAA07708 for ; Tue, 16 Nov 1999 12:13:08 -0700 From: Stan Sieler Message-Id: <199911161914.LAA31352@opus.allegro.com> Subject: Re: [parisc-linux] Got a machine, Got a Kernel Image, Got a Ramdisk Image, What's next? To: chris@4mcnabb.net (Christopher L McNabb) Date: Tue, 16 Nov 1999 11:14:08 -0800 (PST) Cc: parisc-linux@thepuffingroup.com In-Reply-To: <000901bf303e$1a95e540$1e8550d8@4mcnabb.net> from "Christopher L McNabb" at Nov 16, 1999 09:23:07 AM MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii List-ID: Re: > The box is an HP-9000 model 832, HP-UX 9.0, 32 Megs of RAM (yeah, I know > that's rather low), and 3.5 gigs of hard drive space split between 6 HP-IB > disk drives (4 internal, 2 external). A SCSI interface is supposed to > arrive fed-ex today, and I will be adding a CD-ROM and SCSI disks as cash > becomes available. I can't remember if the original 8x2 machines could boot from SCSI. Their immediate predecessors, the 8x5 machines, couldn't (but the ability was added later via a firmware upgrade). That aside, 8x2 machines are a slightly older version of PA-RISC (1.0? 1.1?). The 9000/7xx and most newer 9000/8xx machines are running newer versions of PA-RISC (1.2 or later). The most important difference is in floating point instructions. The PA-RISC kernel *could* be easily compiled for 1.0 architecture... I doubt that it does much floating point work in the kernel! Further, it could be compiled with 1.2 scheduling...that still works on 1.0 machines. The I/O architecture is HP-PB, like the 8x7 machines, so that may be okay. If it turns out that the current port won't work for you, you have a few choices: 1) wait for it to be done, and modify it for 8x2. 2) use your 832 with HP-UX. You can go to http://www.software.hp.com/y2kupgrades/ and get HP-UX 10.20 for free. 3) trade it for a machine supported by the current porting project. If you opt for (3), you may want to know about the Classic Computer mailing list ... a worldwide group of computer collectors. To post a message to it, send to: classiccmp@u.washington.edu The 832 is a 30 MHz machine. -- Stan Sieler sieler@allegro.com www.allegro.com/sieler/wanted/index.html www.allegro.com/sieler