From: "mdew ." <some.nzguy@gmail.com>
To: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Linux 2.4.28-pre4
Date: Sun, 10 Oct 2004 11:58:53 +1300 [thread overview]
Message-ID: <1c1c8636041009155811812617@mail.gmail.com> (raw)
In-Reply-To: <20041008112135.GG16028@logos.cnet>
no chance of including IMQ?
http://www.linuximq.net/
On Fri, 8 Oct 2004 08:21:35 -0300, Marcelo Tosatti
<marcelo.tosatti@cyclades.com> wrote:
>
> Hi,
>
> Here goes 2.4.28-pre4...
>
> It contains a number of driver updates (pcnet, e1000, gdth, prism54),
> a network update from David, few more gcc3.4 warning fixes.
>
> I'm happy that the number of updates is small, -pre3
> has been released more than one month ago.
>
> From now on can now change only what is necessary and let
> the 2.4 tree in peace :)
>
> Summary of changes from v2.4.28-pre3 to v2.4.28-pre4
> ============================================
>
> <ajgrothe:yahoo.com>:
> o [CRYPTO]: Whirlpool algorithm updates
> o [CRYPTO]: Add missing tcrypt part of whirlpool updates
>
> <ananth:broadcom.com>:
> o [libata sata_svw] race condition fix, new device support
>
> <joshk:triplehelix.org>:
> o radeonfb: Fix module unload and red/blue typo
> o hotplug: Don't build cpqphp_proc.o if !PROC_FS
>
> <lesanti:sinectis.com.ar>:
> o fix dcache nr_dentry race
>
> <martin.wilck:fujitsu-siemens.com>:
> o [TG3]: Fix pause handling, we had duplicate flags for the same thing
>
> <michael.waychison:sun.com>:
> o [TG3]: Fix thinko in 5704 fibre hw autoneg code
>
> <peter:pantasys.com>:
> o [IPCONFIG]: Verify DHCPACK packets
> o [IPV4]: Fix DHCPACK checking in ipconfig.c
>
> <tkooda-patch-kernel:devsec.org>:
> o [CRYPTO]: xtea_encrypt() should use XTEA_DELTA instead of TEA_DELTA
>
> <vda:port.imtp.ilyichevsk.odessa.ua>:
> o trivial patch for 2.4: always inline __constant_*
>
> Achim Leubner:
> o gdth update
>
> David S. Miller:
> o [NET]: Kill SCM_CONNECT, never used and unreferenced
> o [TCP]: Just silently ignore ICMP Source Quench messages
> o [TG3]: Recognize all onboard Sun variants, not just 5704
> o [TG3]: Update driver version and reldate
> o [CRYPTO]: Zero out tfm before freeing in crypto_free_tfm()
> o [SPARC64]: Do not log streaming byte hole errors
> o [PKT_SCHED]: sch_netem.c needs linux/init.h
> o [SPARC64]: Disable SBH interrupt properly
>
> David Woodhouse:
> o [NET]: In compat syscall handling, check socket option types correctly
>
> Don Fry:
> o pcnet32: discard oversize rx packets
> o pcnet32: recover after rx hang
> o pcnet32: cleanup IRQ limitation
> o pcnet32: Add HomePNA parameter for 79C978
> o pcnet32: correctly program bcr32
>
> Doug Ledford:
> o RAID1 error handling locking fix
>
> Ganesh Venkatesan:
> o e1000 - ethtool support cleanup
> o e1000 - Enable TSO
> o e1000 - Replace kmalloc with vmalloc for data structures not shared with h/w
> o e1000 - TSO context descriptor setup fixes (in preparation for IPv6 TSO)
> o e1000 - Fix to prevent infinite loop trying to re-establish link while actively communicating
> o e1000 - Condition that determines when to quit polling mode includes work done in Tx path
> o e1000 - Shutdown PHY while bringing the interface down (if WoL not enabled)
> o e1000 - add likely/unlikely to assist branch prediction, other cleanups
> o e1000 - more DPRINTK messages
> o e1000 - suspend/resume fix from alex@zodiac.dasalias.org
> o e1000 - white space corrections
> o e1000 - remove support for advanced TCO features
> o e1000 - Fix MODULE_PARM, module_param and module_param_array usage
> o e1000 - Fix VLAN filter setup errors (while running on PPC)
> o e1000 - Polarity reversal workaround for 10F/10H links
> o e1000 - white space corrections, other cleanups
> o e1000 update - reset default ITR value to 8000
>
> Geert Uytterhoeven:
> o m68k MM off-by-one
> o Atari ST-RAM setup
> o Amiga frame buffer: kill obsolete DMI Resolver code
> o fbdev monochrome lines
>
> Herbert Xu:
> o Backport Via IRQ mask fix
>
> Hideaki Yoshifuji:
> o [IPV6] Fix routing header handling
> o [IPV6] Fix skb allocation size for RST and ACK
> o [IPV6]: Missing ip_rt_put() in SIT error path
>
> Jack Hammer:
> o broken ips update
>
> Jean Delvare:
> o Update Documentation/i2c/writing-clients
>
> Jeff Garzik:
> o [TG3]: Kill all on-chip send BD support code
> o linux/compiler.h: dummy __iomem macro (an sparse annotation)
> o [libata] resync with 2.6.x
> o [libata] remove distinction between MMIO/PIO helper functions
> o [libata] consolidate legacy/native mode init code into helpers
> o [libata] minor comment updates, preparing for iomap merge
>
> Jens Axboe:
> o irq safe gendisk_lock
>
> Linus Torvalds:
> o libata: initial PCI memory annotations
>
> Marcelo Tosatti:
> o Cset exclude: Achim_Leubner@adaptec.com|ChangeSet|20040928105422|00490
> o Mike Miller: cciss typo fix
> o Changed EXTRAVERSION to -pre4
>
> Margit Schubert-While:
> o prism54 Code cleanup
> o prism54 remove module params
> o prism54 add WE17 support
> o prism54 initial WPA support
> o prism54 fix wpa_supplicant frequency parsing
> o prism54 remove TRACE
> o prism54 Bug in timeout scheduling
> o prism54 print firmware version
> o prism54 bug initialization/mgt_commit
>
> Maximilian Attems:
> o menuconfig fix crash due to infinite recursion
>
> Mikael Pettersson:
> o 53c700 scsi driver gcc-3.4 fixes
> o pcmcia mem_op.h gcc-3.4 fixes
> o ATM drivers gcc-3.4 fixes
> o IBM PCI hotplug controller driver gcc-3.4 fixes
> o ISDN drivers gcc-3.4 fixes
> o MTD drivers gcc-3.4 fixes
> o RIVA driver gcc-3.4 fix
> o E100 driver gcc-3.4 fixes
> o PPC32 PReP residual data gcc-3.4 fix
> o matrox framebuffer driver gcc-3.4 fix
>
> Pete Zaitcev:
> o USB drivers gcc-3.4 fixes
>
> Stephen Hemminger:
> o [TCP]: Store congestion algorithm per socket
> o [TCP]: Add vegas style bandwidth info to 2.4.x tcp diag
> o [TCP]: Backport 2.6.x cleanup of westwood code
>
> Thomas Graf:
> o [PKT_SCHED]: Fix slab corruption in cbq_destroy
> o [PKT_SCHED] Report qdisc parent to userspace
>
> Wensong Zhang:
> o [IPVS] add the MAINTAINERS entry
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
next prev parent reply other threads:[~2004-10-09 22:59 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-10-08 11:21 Linux 2.4.28-pre4 Marcelo Tosatti
2004-10-08 20:08 ` 2.4.28-pre4: e1000_main.c gcc 3.4 compile error Adrian Bunk
2004-10-09 22:58 ` mdew . [this message]
2004-10-11 16:32 ` Linux 2.4.28-pre4 Brian Lazara
2004-10-11 16:59 ` Manfred Spraul
2004-10-11 17:07 ` Jeff Garzik
2004-10-16 11:30 ` Barry K. Nathan
[not found] <bc8bcc5104100909425b84579a@mail.gmail.com>
2004-10-09 17:04 ` Martins Krikis
2004-10-09 15:51 ` Marcelo Tosatti
2004-10-09 20:11 ` Martins Krikis
2004-10-09 22:08 ` Jeff Garzik
2004-10-09 23:40 ` Martins Krikis
-- strict thread matches above, loose matches on Subject: below --
2004-10-11 21:00 Brian Lazara
2004-10-12 14:37 Xose Vazquez Perez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1c1c8636041009155811812617@mail.gmail.com \
--to=some.nzguy@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=marcelo.tosatti@cyclades.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.