[lm-sensors] SMSC LPC47M192 - "Device is disabled, will not use"

[tomhol@gmail.com (Tomas Holmqvist)]

My developing has been down for a couple of months as I have had
courses in school that took much time. But I'll try to continue with
the final things this summer.

The driver works somewhat, but I haven't tested it munch and there's
the thing on making it a part of the sensor package. So don't count on
a finnished driver until fall.

/Tomas

On 5/31/05, Rudolf Marek <r.marek@sh.cvut.cz> wrote:
> Continue? [Y/n]
> >      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f    0123456789abcdef
> > 00: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX    XXXXXXXXXXXXXXXX
> > 10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX 00 00    XXXXXXXXXXXXXX..
> > 20: 00 00 00 00 31 c0 22 20 XX XX XX ff ff ff ff ff    ....1?" XXX.....
> > 30: ff ff ff ff ff ff ff ff 7a fe ff XX XX XX 55 20    ........z?.XXXU
> 
> 55 20 is really an SMSC LPC47M192
> 
> You tried smsc47m1, but:
> 
> The 47M15x and 47M192 chips contain a full 'hardware monitoring block'
> in addition to the fan monitoring and control. The hardware monitoring
> block is not supported by the driver.
> 
> Good news is that Tomas Holmqvist is working on that.
> 
> Tomas any progress on this?
> 
> Thanks,
> Regards
> 
> Rudolf
>