From: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
To: sashiko-reviews@lists.linux.dev
Cc: intel-xe@lists.freedesktop.org
Subject: Re: [PATCH v2] drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches
Date: Thu, 03 Sep 2026 13:59:30 +0200 [thread overview]
Message-ID: <1ce02239a8c47c110f3b0990ceddb82499297be0.camel@linux.intel.com> (raw)
In-Reply-To: <20260903115039.0D4331F000E9@smtp.kernel.org>
On Thu, 2026-09-03 at 11:50 +0000, sashiko-bot@kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 1 potential
> issue(s) to consider:
>
> Pre-existing issues:
> - [High] Unmitigated cross-process information leak via L1 dataport
> cache on MTL platforms.
MTL is not officially supported by the xe driver, however an additional
fix for MTL is in the pipeline.
/Thomas
> --
>
> commit 9a1c38c27d115c29ae7f3e8c47d4fe8e892e8d64
> Author: Thomas Hellström <thomas.hellstrom@linux.intel.com>
>
> drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches
>
> This commit introduces an explicit flush of the LSC untyped L1
> dataport cache
> via PIPE_CONTROL in emit_render_cache_flush() for Xe2 and later
> platforms. It
> addresses an issue where the L1 dataport cache was not reliably
> coupled to the
> HDC Pipeline Flush starting from MTL. By explicitly setting this bit
> on
> GRAPHICS_VERx100(xe) >= 2000, it aims to prevent stale data leaks
> when memory
> is reclaimed.
>
> Link:
> https://gitlab.freedesktop.org/mesa/mesa/-/commit/7c2ff46a4fc3e537573ac9503057e0cd29b6fff3
> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/8909
>
> > diff --git a/drivers/gpu/drm/xe/xe_ring_ops.c
> > b/drivers/gpu/drm/xe/xe_ring_ops.c
> > index 39a670e91ba72..08b4a4283e96a 100644
> > --- a/drivers/gpu/drm/xe/xe_ring_ops.c
> > +++ b/drivers/gpu/drm/xe/xe_ring_ops.c
> [ ... ]
> > @@ -220,6 +221,16 @@ static int emit_render_cache_flush(struct
> > xe_sched_job *job, u32 *dw, int i)
> >
> > LRC_PPHWSP_FLUSH_INVAL_SCRATCH_ADDR, 0);
> >
> > flags0 = PIPE_CONTROL0_HDC_PIPELINE_FLUSH;
> > + /*
> > + * Prior to MTL, HDC Pipeline Flush reliably also flushes
> > the LSC
> > + * untyped L1 dataport cache, provided HDC_CHICKEN0 is
> > programmed
> > + * correctly. Starting with MTL that coupling no longer
> > holds
> > + * regardless of how HDC_CHICKEN0 is programmed, but
> > explicitly
> > + * requesting the flush via PIPE_CONTROL is itself only
> > reliable
> > + * from Xe2 onward, so only gate it in on Xe2+.
> > + */
> > + if (GRAPHICS_VERx100(xe) >= 2000)
> > + flags0 |=
> > PIPE_CONTROL0_UNTYPED_DATAPORT_CACHE_FLUSH;
>
> [Severity: High]
> This isn't a bug introduced by this patch, but does this condition
> leave
> MTL platforms vulnerable to a cross-process information leak?
>
> Since GRAPHICS_VERx100(xe) < 2000 for MTL platforms, they will not
> receive
> the L1 dataport cache flush here. If the command streamer (CS) flush
> is
> unreliable on MTL, does this mean sensitive data can still be read
> from the L1
> cache by another process after memory is reclaimed or evicted?
>
> If the PIPE_CONTROL method cannot be relied on for MTL, is an
> alternative
> mitigation strategy, such as dummy shaders or MMIO-based flushes,
> needed to
> fully resolve the vulnerability on those platforms?
next prev parent reply other threads:[~2026-09-03 11:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-03 11:45 [PATCH v2] drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches Thomas Hellström
2026-09-03 11:50 ` sashiko-bot
2026-09-03 11:59 ` Thomas Hellström [this message]
2026-09-03 11:52 ` ✗ CI.checkpatch: warning for drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches (rev2) Patchwork
2026-09-03 11:54 ` ✓ CI.KUnit: success " Patchwork
2026-09-03 12:32 ` ✓ Xe.CI.BAT: " Patchwork
2026-09-03 23:30 ` ✗ Xe.CI.FULL: failure " Patchwork
2026-09-07 11:28 ` [PATCH v2] drm/xe: Flush LSC untyped L1 dataport cache after rcs/ccs batches Matthew Auld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1ce02239a8c47c110f3b0990ceddb82499297be0.camel@linux.intel.com \
--to=thomas.hellstrom@linux.intel.com \
--cc=intel-xe@lists.freedesktop.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.