From mboxrd@z Thu Jan 1 00:00:00 1970 From: fmoraes@nc.rr.com Subject: dmix and Date: Fri, 25 Jun 2004 20:38:31 -0400 Sender: alsa-devel-admin@lists.sourceforge.net Message-ID: <1dc37831dc56f3.1dc56f31dc3783@southeast.rr.com> Reply-To: fmoraes@nc.rr.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7BIT Return-path: Content-language: en Content-Disposition: inline Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org I was trying the dmix setup on my work computer and I found that I could not work, not even with the default settings, just by trying aplay -Dplug:dmix test.wav gives me nothing. The card is a Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01). I've noticed in the status proc entry that the application pointer stays always at 0. Any ideas or suggestions? Francisco ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com