From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001202]: No sound through speakers, only headphones
Date: Wed, 22 Jun 2005 05:12:40 +0200 [thread overview]
Message-ID: <1f74c62003141b6967ff2b754a920c01@bugtrack.alsa-project.org> (raw)
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1202>
======================================================================
Reported By: viroid
Assigned To:
======================================================================
Project: ALSA - driver
Issue ID: 1202
Category: PCI - intel8x0
Reproducibility: always
Severity: major
Priority: normal
Status: new
Distribution: Fedora Core 4
Kernel Version: 2.6.11-1.1369
======================================================================
Date Submitted: 06-18-2005 04:47 CEST
Last Modified: 06-22-2005 05:12 CEST
======================================================================
Summary: No sound through speakers, only headphones
Description:
I cannot get any audio output from the internal speakers on the laptop, I
did however hear output through headphones; I tried that after reading a
few issues on here. I've muted headphones, phone, and line from the
alsamixer, I've only recently started using linux and I don't really know
what else to try.
======================================================================
----------------------------------------------------------------------
tiwai - 06-21-05 12:58
----------------------------------------------------------------------
The hardware details? Otherwise really hard to tell you anything.
Please attach /etc/asound.state, the contents of
/proc/asound/card0/codec97#0/* files, too.
----------------------------------------------------------------------
viroid - 06-22-05 05:12
----------------------------------------------------------------------
I've pasted the contents of the files you requested, if there's anything
else yo u need or anything that would be helpful just let me know. Thanks
in advance for your assistance, I appreciate it!
...Chris
asound.state >>
state.I82801DBICH4 {
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
}
control.2 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Master Playback Volume'
value.0 31
value.1 31
}
control.3 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Headphone Playback Switch'
value false
}
control.4 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Headphone Playback Volume'
value.0 30
value.1 30
}
control.5 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Mono Playback Switch'
value true
}
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
iface MIXER
name 'Master Mono Playback Volume'
value 31
}
control.7 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PC Speaker Playback Switch'
value true
}
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 15'
iface MIXER
name 'PC Speaker Playback Volume'
value 15
}
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Phone Playback Switch'
value false
}
control.10 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
iface MIXER
name 'Phone Playback Volume'
value 0
}
control.11 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Playback Switch'
value false
}
control.12 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 31'
iface MIXER
name 'Mic Playback Volume'
value 0
}
control.13 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Mic Boost (+20dB)'
value false
}
control.14 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Line Playback Switch'
value false
}
control.15 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
}
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'CD Playback Switch'
value true
}
control.17 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'CD Playback Volume'
value.0 30
value.1 30
}
control.18 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Video Playback Switch'
value false
}
control.19 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Video Playback Volume'
value.0 0
value.1 0
}
control.20 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Aux Playback Switch'
value false
}
control.21 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'Aux Playback Volume'
value.0 0
value.1 0
}
control.22 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'PCM Playback Switch'
value true
}
control.23 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
iface MIXER
name 'PCM Playback Volume'
value.0 30
value.1 30
}
control.24 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 2
comment.item.0 Mic
comment.item.1 CD
comment.item.2 Video
comment.item.3 Aux
comment.item.4 Line
comment.item.5 Mix
comment.item.6 'Mix Mono'
comment.item.7 Phone
iface MIXER
name 'Capture Source'
value.0 Line
value.1 Line
}
control.25 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Capture Switch'
value false
}
control.26 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 15'
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
}
control.27 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 'pre 3D'
comment.item.1 'post 3D'
iface MIXER
name 'PCM Out Path & Mute'
value 'pre 3D'
}
control.28 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name '3D Control - Switch'
value true
}
control.29 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mix
comment.item.1 Mic
iface MIXER
name 'Mono Output Select'
value Mix
}
control.30 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic1
comment.item.1 Mic2
iface MIXER
name 'Mic Select'
value Mic1
}
control.31 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 15'
iface MIXER
name '3D Control - Center'
value 15
}
control.32 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 15'
iface MIXER
name '3D Control - Depth'
value 15
}
control.33 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value
'0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.34 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value
cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
}
control.35 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value
'0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.36 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value true
}
control.37 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 3'
iface MIXER
name 'IEC958 Playback AC97-SPSA'
value 3
}
control.38 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'External Amplifier'
value false
}
}
state.Modem {
control.1 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Off-hook Switch'
value false
}
}
/proc/asound/card0/code9797#0/ac97#0-0 >>
0-0/0: SigmaTel STAC9750,51
Capabilities : -headphone out-
DAC resolution : 20-bit
ADC resolution : 20-bit
3D enhancement : SigmaTel 3D Enhancement
Current setup
Mic gain : +0dB [+0dB]
POP path : pre 3D
Sim. stereo : off
3D enhancement : on
Loudness : off
Mono output : MIX
Mic select : Mic1
ADC/DAC loopback : off
Extended ID : codec=0 rev=1 AMAP DSA=0 SPDIF VRA
Extended status : SPCV SPDIF=10/11 SPDIF VRA
PCM front DAC : 48000Hz
PCM ADC : 8000Hz
SPDIF Control : Consumer PCM Category=0x2 Generation=1 Rate=48kHz
((( I see that capabilities tag = headphones out? )))
/proc/asound/card0/codec97#0/ac97#0-0+regs >>
0:00 = 6a90
0:02 = 0000
0:04 = 8101
0:06 = 0000
0:08 = 0000
0:0a = 0000
0:0c = 801f
0:0e = 801f
0:10 = 9f1f
0:12 = 0101
0:14 = 9f1f
0:16 = 9f1f
0:18 = 0101
0:1a = 0404
0:1c = 8000
0:1e = 0000
0:20 = 2000
0:22 = 000c
0:24 = 0000
0:26 = 800f
0:28 = 0605
0:2a = 0435
0:2c = bb80
0:2e = 0000
0:30 = 0000
0:32 = 1f40
0:34 = 0000
0:36 = 0000
0:38 = 0000
0:3a = 2824
0:3c = 0000
0:3e = 0100
0:40 = 0000
0:42 = 0000
0:44 = 0000
0:46 = 0000
0:48 = 0000
0:4a = 0000
0:4c = 0003
0:4e = ffff
0:50 = 0000
0:52 = 0000
0:54 = 0000
0:56 = 0000
0:58 = 0000
0:5a = 0000
0:5c = 0000
0:5e = 0000
0:60 = 0000
0:62 = 0000
0:64 = 0000
0:66 = 0000
0:68 = 0000
0:6a = 0000
0:6c = 0002
0:6e = 1000
0:70 = 0000
0:72 = 0000
0:74 = 8800
0:76 = 0000
0:78 = 0000
0:7a = 0000
0:7c = 8384
0:7e = 7650
Issue History
Date Modified Username Field Change
======================================================================
06-18-05 04:47 viroid New Issue
06-18-05 04:47 viroid Distribution => Fedora Core 4
06-18-05 04:47 viroid Kernel Version => 2.6.11-1.1369
06-21-05 12:58 tiwai Note Added: 0005110
06-22-05 05:12 viroid Note Added: 0005118
======================================================================
-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
next reply other threads:[~2005-06-22 3:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-06-22 3:12 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2005-06-22 15:50 [ALSA - driver 0001202]: No sound through speakers, only headphones bugtrack
2005-06-22 14:35 bugtrack
2005-06-22 10:16 bugtrack
2005-06-21 10:58 bugtrack
2005-06-18 2:47 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1f74c62003141b6967ff2b754a920c01@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.