From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mailserv2.iuinc.com (IDENT:qmailr@mailserv2.iuinc.com [206.245.164.55]) by puffin.external.hp.com (8.9.3/8.9.3) with SMTP id PAA03452 for ; Thu, 6 Apr 2000 15:30:50 -0600 Received: (from steve@localhost) by osiris.silug.org (8.9.3/8.9.3) id QAA25142 for parisc-linux@thepuffingroup.com; Thu, 6 Apr 2000 16:30:46 -0500 From: Steven Pritchard Message-Id: <200004062130.QAA25142@osiris.silug.org> Subject: Re: [parisc-linux] K100 problem In-Reply-To: <002801bf9b5f$c12180e0$4b58000f@jh73313p.cup.hp.com> from Jim Hull at "Mar 31, 2000 02:23:35 pm" To: parisc-linux@thepuffingroup.com Date: Thu, 6 Apr 2000 16:30:46 -0500 (CDT) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII List-ID: Jim Hull said: > WARN A008 No bootable device found Apparently the terminal was dead. I hooked it up to my PC and got output. Now I have another problem... The box outputs to the serial console, but it doesn't seem to want to take input on the serial console. Any ideas what might cause that? Here's the boot messages: -- Firmware Version 1.8 Duplex Console IO Dependent Code (IODC) revision 4 ------------------------------------------------------------------------------ (c) Copyright 1990-1994, Hewlett-Packard Company, All rights reserved ------------------------------------------------------------------------------ Processor Speed State CoProcessor State Cache Size --------- -------- --------------------- ----------------- ---------- 0 100 MHz Active Functional 256 KB Central Bus Speed (in MHz) : 100 Available Memory (bytes) : 167772160 Good Memory Required (bytes): 16211968 Primary boot path: 8/0.6 (dec) Alternate boot path: 8/12/5.0 (dec) Console path: 8/4/0.0 (dec) Keyboard path: 8/12/7.0 (dec) CPU 0 WARNING: Memory configuration is not optimized for performance. Refer to the System Installation or Memory Installation manuals for memory configuration guidelines. Processor is starting autoboot process. To discontinue, press any key within 10 seconds. 10 seconds expired. Proceeding... Trying Primary Boot Path ------------------------ Booting... Boot IO Dependent Code (IODC) revision 7 HARD Booted. ISL Revision A.00.38 OCT 26, 1994 ISL booting hpux Boot : disc(8/0.6.0;0)/stand/vmunix 4334092 + 380928 + 407872 start 0x17ce68 -- It does boot into HP-UX, so if I can figure out a way into it over the network, I can probably reload the box with IgniteUX and just use it as a HP-UX system, but obviously life would be easier if I could use the console... Steve -- steve@silug.org | Linux Users of Central Illinois (618)398-7320 | Meetings the 4th Tuesday of every month Steven Pritchard | http://www.luci.org/ for more info