From: Neil Russell <caret@c-side.com>
To: "Gessner, Matt" <mattg@aiinet.com>
Cc: "'Linux PPC'" <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: EST SBC8260 Question
Date: Fri, 26 May 2000 11:11:41 -0700 [thread overview]
Message-ID: <20000526111141.D9365@lx.c-side.com> (raw)
In-Reply-To: <392EA01D.CAC477EB@embeddededge.com>; from Dan Malek on Fri, May 26, 2000 at 12:02:37PM -0400
On Fri, May 26, 2000 at 12:02:37PM -0400, Dan Malek wrote:
> > Can anyone who's using this board please shed some light
> > on what's going on?
>
> It depends upon the type of DIMM you are using. Mine has the 2M x 64
> DIMM, so it uses only /CS2 to get the 16 Mbyte space. It also depends
> upon the DRAM controller configuration. Make sure you have the DRAM
> controller properly configured to route the address lines.
The vxWorks BSP expects a stick with one bank of 16MB SDRAM. If you didn't
get such a stick from EST, I'd go back and complain. Alternatively, you
could put a stick in that has a bank that is at least 16MB. I have a 128MB
stick in mine and it happily pretends to be 16MB.
Neil.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
prev parent reply other threads:[~2000-05-26 18:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-05-26 12:54 EST SBC8260 Question Gessner, Matt
2000-05-26 16:02 ` Dan Malek
2000-05-26 18:11 ` Neil Russell [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20000526111141.D9365@lx.c-side.com \
--to=caret@c-side.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=mattg@aiinet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.