Re: [parisc-linux] a500.out16

[Richard Hirst <rhirst@linuxcare.com>]

On Thu, Nov 02, 2000 at 12:21:36AM -0800, Grant Grundler wrote:
> Hi Richard (et al),
> I finally think I understand how pcibios_align_resource() is used...
> that definitely was the problem. Everything on A500 but PCI-PCI bridge
> seems to be assigned I/O port and MMIO addresses correctly.
> 
> I'll look at tulip code tomorrow to see why it's not happy.

I fixed tulip_core.c to report what it means, which gave me

tulip: MMIO resource (0x400@0xfffffffff8020000) unavailable, aborting

Note sym53c8xx.c doesn't seem to bother with request_mem_region(), so
maybe request_mem_region() is just broken.

I then patched out the goto, so it ignored that error, and....

Linux Tulip driver version 0.9.8 (July 13, 2000)
tulip: MMIO resource (0x400@0xfffffffff8020000) unavailable, aborting
PCI: Setting latency timer of device 00:00.0 to 64
eth0: Digital DS21143 Tulip rev 65 at 0x0, 00:30:6E:03:79:A0, IRQ 128.
eth0:  MII transceiver #1 config 1000 status 782d advertising 01e1.
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 10.160.240.111, my address is 10.160.240.117
Switching from PDC console

Wheeee!  Nice work Grant!

Richard