From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Wed, 7 Feb 2001 07:54:04 +0100 From: Olaf Hering To: Takashi Oe Cc: linuxppc-dev@lists.linuxppc.org Subject: Re: MESH not found with 2.4.1 on 7500 Message-ID: <20010207075404.G14283@suse.de> References: <20010206173709.A17234@suse.de> <20010206112148.0c9b60d3.toe@unlserve.unl.edu> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="jI8keyz6grp/JLjh" In-Reply-To: <20010206112148.0c9b60d3.toe@unlserve.unl.edu>; from toe@unlserve.unl.edu on Tue, Feb 06, 2001 at 11:21:48AM -0600 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: --jI8keyz6grp/JLjh Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Tue, Feb 06, Takashi Oe wrote: > On Tue, 6 Feb 2001 17:37:09 +0100, Olaf Hering wrote: > > > > > Hi, > > > > the current 2.4.1 can not found the mesh scsi controller on my 7500/100. > > It doesnt work with bootx and boot fd:vmlinux.coff. > > > > Any ideas how to fix it? > > As far as I can tell, your kernel is not getting that far. Before MESH > message output, you should have something like: > > SCSI subsystem driver Revision: 1.00 > > which is missing. On my system, there is IDE related messages immediately > following the loop device message, and it's followed by (old) adb mouse > driver and PPP device message. SCSI is after all of those. Yeah, 2.4 changed the detection order. And that loop device ... I guess I have to change the subject. Gruss Olaf -- $ man clone BUGS Main feature not yet implemented... --jI8keyz6grp/JLjh Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="peach_241crash.txt" mem_pieces_remove: [352000,41326a) not in any region Total memory = 72MB; using 512kB for hash table (at c0480000) Linux version 2.4.1 (root@PowerPC.suse.de) (gcc version 2.95.2 19991024 (release)) #1 Fri Feb 2 07:49:31 GMT 2001 Cache coherency enabled for bandit/PSX at f2000000 Found Bandit PCI host bridge at 0xf2000000. Firmware bus number: 0->0 Found Chaos PCI host bridge at 0xf0000000. Firmware bus number: 1->1 On node 0 totalpages: 18432 zone(0): 18432 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ramdisk_size=8192 root=/dev/fd0 ramdisk_size=128000 console=ttyS0,38400 System has 32 possible interrupts GMT Delta read from XPRAM: 60 minutes, DST: off Console: colour dummy device 80x25 Calibrating delay loop... 99.53 BogoMIPS Memory: 67684k available (2024k kernel code, 1072k data, 320k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) VFS: Diskquotas version dquot_6.4.0 initialized POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Fixup mem res, dev: 0.10, res_start: f3000000->f3000000 PCI: Resource f3000000-f301ffff (f=200, d=0, p=0) Macintosh CUDA driver v0.5 for Unified ADB. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd v1.8 clgen: Driver for Cirrus Logic based graphic boards, v1.9.8 Couldn't find PCI device controlfb: Memory bank 1 present, bank 2 absent, total VRAM 2MB Monitor sense value = 0x60b, using video mode 13 and color mode 2. Console: switching to colour frame buffer device 104x39 fb0: control display adapter MacOS display is /chaos/control input0: Macintosh mouse button emulation PowerMac Z8530 serial driver version 2.0 ttyS0 at 0xfd9d2020 (irq = 15) is a Z8530 ESCC, port = modem ttyS1 at 0xfd9cf000 (irq = 16) is a Z8530 ESCC, port = printer pty: 256 Unix98 ptys configured block: queued sectors max/low 44741kB/14913kB, 192 slots per queue RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx fd0: SWIM3 floppy controller Unable to get major 2 for floppy NET4: Frame Diverter 0.46 RAMDISK: Compressed image found at block 0 Uncompressing.......................................................done. Freeing initrd memory: 4194300k freed Machine check in kernel mode. Caused by (from SRR1=1030): Unknown values in msr mem_pieces_remove: [352000,41326a) not in any region Total memory = 72MB; using 512kB for hash table (at c0480000) Linux version 2.4.1 (root@PowerPC.suse.de) (gcc version 2.95.2 19991024 (release)) #1 Fri Feb 2 07:49:31 GMT 2001 Cache coherency enabled for bandit/PSX at f2000000 Found Bandit PCI host bridge at 0xf2000000. Firmware bus number: 0->0 Found Chaos PCI host bridge at 0xf0000000. Firmware bus number: 1->1 On node 0 totalpages: 18432 zone(0): 18432 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: ramdisk_size=8192 root=/dev/fd0 ramdisk_size=50000 console=ttyS0,38400 System has 32 possible interrupts GMT Delta read from XPRAM: 60 minutes, DST: off Console: colour dummy device 80x25 Calibrating delay loop... 99.53 BogoMIPS Memory: 67684k available (2024k kernel code, 1072k data, 320k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) VFS: Diskquotas version dquot_6.4.0 initialized POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Fixup mem res, dev: 0.10, res_start: f3000000->f3000000 PCI: Resource f3000000-f301ffff (f=200, d=0, p=0) Macintosh CUDA driver v0.5 for Unified ADB. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd v1.8 clgen: Driver for Cirrus Logic based graphic boards, v1.9.8 Couldn't find PCI device controlfb: Memory bank 1 present, bank 2 absent, total VRAM 2MB Monitor sense value = 0x60b, using video mode 13 and color mode 2. Console: switching to colour frame buffer device 104x39 fb0: control display adapter MacOS display is /chaos/control input0: Macintosh mouse button emulation PowerMac Z8530 serial driver version 2.0 ttyS0 at 0xfd9d2020 (irq = 15) is a Z8530 ESCC, port = modem ttyS1 at 0xfd9cf000 (irq = 16) is a Z8530 ESCC, port = printer pty: 256 Unix98 ptys configured block: queued sectors max/low 44741kB/14913kB, 192 slots per queue RAMDISK driver initialized: 16 RAM disks of 50000K size 1024 blocksize loop: enabling 8 loop devices Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx fd0: SWIM3 floppy controller Unable to get major 2 for floppy NET4: Frame Diverter 0.46 RAMDISK: Compressed image found at block 0 Uncompressing.......................................................done. Freeing initrd memory: 4194300k freed Machine check in kernel mode. Caused by (from SRR1=1030): Unknown values in msr device tree used 641712 bytes Total memory = 72MB; using 512kB for hash table (at c0380000) Linux version 2.2.18 (root@PowerMacintosh.suse.de) (gcc version 2.95.2 19991024 (release)) #1 Fri Feb 2 08:11:30 GMT 2001 PCI bus 0 controlled by bandit at f2000000 Cache coherency enabled for bandit/PSX at f2000000 PCI bus 1 controlled by chaos at f0000000 pmac nvram is core99: 0 System has 32 possible interrupts GMT Delta read from XPRAM: 60 minutes, DST: off Console: colour dummy device 80x25 Calibrating delay loop... 99.53 BogoMIPS Memory: 68924k available (1804k kernel code, 2232k data, 172k init) [c0000000,c4800000] Dentry hash table entries: 16384 (order 5, 128k) Buffer cache hash table entries: 131072 (order 7, 512k) Page cache hash table entries: 32768 (order 5, 128k) Inode hash table entries: 16384 (128k), inode-max: 9216 VFS: Diskquotas version dquot_6.4.0 initialized POSIX conformance testing by UNIFIX PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 131072 bhash 65536) NET4: AppleTalk 0.18 for Linux NET4.0 Initializing RT netlink socket Starting kswapd v 1.5 MacOS display is /chaos/control Monitor sense value = 0x60b, using video mode 13 and color mode 2. Console: switching to colour frame buffer device 104x39 fb0: control display adapter input0: Macintosh mouse button emulation PowerMac Z8530 serial driver version 2.0 ttyS0 at 0xf3013020 (irq = 15) is a Z8530 ESCC, port = modem ttyS1 at 0xf3013000 (irq = 16) is a Z8530 ESCC, port = printer pty: 256 Unix98 ptys configured Macintosh non-volatile memory driver v1.0 RAM disk driver initialized: 16 RAM disks of 128000K size loop: registered device at major 7 fd0: SWIM3 floppy controller md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed 8regs : 88.011 MB/sec 32regs : 74.676 MB/sec using fastest function: 8regs (88.011 MB/sec) scsi0 : MESH scsi1 : 53C94 scsi : 2 hosts. mesh: target 0 synchronous at 5.0 MB/s Vendor: QUANTUM Model: FIREBALL_TM1280S Rev: 300L Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 mesh: target 1 synchronous at 5.0 MB/s Vendor: IBM Model: DCAS-32160 Rev: S65A Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0 mesh: target 3 synchronous at 5.0 MB/s Vendor: MATSHITA Model: CD-ROM CR-8005A Rev: 4.0i Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 scsi : detected 1 SCSI cdrom 2 SCSI disks total. Uniform CD-ROM driver Revision: 3.11 SCSI device sda: hdwr sector= 512 bytes. Sectors= 2503872 [1222 MB] [1.2 GB] SCSI device sdb: hdwr sector= 512 bytes. Sectors= 4226725 [2063 MB] [2.1 GB] eth0: MACE at 00:05:02:c4:db:82, chip revision 9.64 Partition check: sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sdb: sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sdb9 md.c: sizeof(mdp_super_t) = 4104 RAMDISK: Compressed image found at block 0 Uncompressing................................................done. ADB keyboard at 2, handler set to 3 Detected ADB keyboard, type ISO, swapping keys. input1: ADB HID on ID 2:2.05 ADB mouse at 3, handler set to 2 input2: ADB HID on ID 3:3.01 usb.c: registered new driver hid keybdev.c: Adding keyboard: input1 mouse0: PS/2 mouse device for input2 mouse1: PS/2 mouse device for input0 mice: PS/2 mouse device common for all mice usb.c: registered new driver usbdevfs usb.c: registered new driver hub VFS: Mounted root (ext2 filesystem). >>> SuSE installation program v1.1.18 (c) 1996-2001 SuSE GmbH <<< --jI8keyz6grp/JLjh-- ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/