From: Jon Forsberg <zzed@cyberdude.com>
To: linux-kernel@vger.kernel.org
Subject: [PROBLEM] 2.4.1 can't mount ext2 CD-ROM
Date: Sun, 18 Feb 2001 15:26:25 +0100 [thread overview]
Message-ID: <20010218152624.A506@pc1> (raw)
I have two ext2 CD-ROMs. One of them I can mount the normal way, the other I
can't. Both are ok according to debugfs and e2fsck and if I do
'mount -t ext2 -o loop /dev/cdrom /cdrom' instead, both works.
The one that doesn't work have a blocksize of 1024 according to debugfs:
Block size = 1024, fragment size = 1024
And the other:
Block size = 4096, fragment size = 4096
What happens:
# mount -t ext2 /dev/cdrom /cdrom
mount: block device /dev/cdrom is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
or too many mounted file systems
kern.log:
Feb 18 14:54:34 pc1 kernel: VFS: Unsupported blocksize on dev sr(11,0).
I'm pretty sure both worked with 2.2.17.
Please CC me.
--zzed
Feb 17 15:01:13 pc1 syslogd 1.3-3#33.1: restart.
Feb 17 15:01:14 pc1 kernel: klogd 1.3-3#33.1, log source = /proc/kmsg started.
Feb 17 15:01:14 pc1 kernel: Inspecting /boot/System.map-2.4.1
Feb 17 15:01:14 pc1 kernel: Loaded 16115 symbols from /boot/System.map-2.4.1.
Feb 17 15:01:14 pc1 kernel: Symbols match kernel version 2.4.1.
Feb 17 15:01:14 pc1 kernel: No module symbols loaded.
Feb 17 15:01:14 pc1 kernel: Linux version 2.4.1 (zzed@pc1) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 ons feb 14 12:35:41 CET 2001
Feb 17 15:01:14 pc1 kernel: BIOS-provided physical RAM map:
Feb 17 15:01:14 pc1 kernel: BIOS-e820: 00000000000a0000 @ 0000000000000000 (usable)
Feb 17 15:01:14 pc1 kernel: BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
Feb 17 15:01:14 pc1 kernel: BIOS-e820: 0000000007deb000 @ 0000000000100000 (usable)
Feb 17 15:01:14 pc1 kernel: BIOS-e820: 0000000000004000 @ 0000000007eeb000 (ACPI data)
Feb 17 15:01:14 pc1 kernel: BIOS-e820: 0000000000010000 @ 0000000007eef000 (reserved)
Feb 17 15:01:14 pc1 kernel: BIOS-e820: 0000000000001000 @ 0000000007eff000 (ACPI NVS)
Feb 17 15:01:14 pc1 kernel: BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
Feb 17 15:01:14 pc1 kernel: On node 0 totalpages: 32491
Feb 17 15:01:14 pc1 kernel: zone(0): 4096 pages.
Feb 17 15:01:14 pc1 kernel: zone(1): 28395 pages.
Feb 17 15:01:14 pc1 kernel: zone(2): 0 pages.
Feb 17 15:01:14 pc1 kernel: Kernel command line: auto BOOT_IMAGE=Linux ro root=302 BOOT_FILE=/boot/vmlinuz hda=13410,15,63 hdc=scsi bttv.radio=1 hisax=36,2
Feb 17 15:01:14 pc1 kernel: ide_setup: hda=13410,15,63
Feb 17 15:01:14 pc1 kernel: ide_setup: hdc=scsi
Feb 17 15:01:14 pc1 kernel: Initializing CPU#0
Feb 17 15:01:14 pc1 kernel: Detected 668.194 MHz processor.
Feb 17 15:01:14 pc1 kernel: Console: colour VGA+ 80x25
Feb 17 15:01:14 pc1 kernel: Calibrating delay loop... 1333.65 BogoMIPS
Feb 17 15:01:14 pc1 kernel: Memory: 125032k/129964k available (1364k kernel code, 4548k reserved, 604k data, 180k init, 0k highmem)
Feb 17 15:01:14 pc1 kernel: Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Feb 17 15:01:14 pc1 kernel: Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Feb 17 15:01:14 pc1 kernel: Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Feb 17 15:01:14 pc1 kernel: Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Feb 17 15:01:14 pc1 kernel: CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
Feb 17 15:01:14 pc1 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
Feb 17 15:01:14 pc1 kernel: CPU: L2 cache: 128K
Feb 17 15:01:14 pc1 kernel: Intel machine check architecture supported.
Feb 17 15:01:14 pc1 kernel: Intel machine check reporting enabled on CPU#0.
Feb 17 15:01:14 pc1 kernel: CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Feb 17 15:01:14 pc1 kernel: CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
Feb 17 15:01:14 pc1 kernel: CPU: Common caps: 0383f9ff 00000000 00000000 00000000
Feb 17 15:01:14 pc1 kernel: CPU: Intel Celeron (Coppermine) stepping 03
Feb 17 15:01:14 pc1 kernel: Enabling fast FPU save and restore... done.
Feb 17 15:01:14 pc1 kernel: Enabling unmasked SIMD FPU exception support... done.
Feb 17 15:01:14 pc1 kernel: Checking 'hlt' instruction... OK.
Feb 17 15:01:14 pc1 kernel: POSIX conformance testing by UNIFIX
Feb 17 15:01:14 pc1 kernel: mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
Feb 17 15:01:14 pc1 kernel: mtrr: detected mtrr type: Intel
Feb 17 15:01:14 pc1 kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0960, last bus=1
Feb 17 15:01:14 pc1 kernel: PCI: Using configuration type 1
Feb 17 15:01:14 pc1 kernel: PCI: Probing PCI hardware
Feb 17 15:01:14 pc1 kernel: PCI: Discovered primary peer bus fe [IRQ]
Feb 17 15:01:14 pc1 kernel: PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
Feb 17 15:01:14 pc1 kernel: Linux NET4.0 for Linux 2.4
Feb 17 15:01:14 pc1 kernel: Based upon Swansea University Computer Society NET3.039
Feb 17 15:01:14 pc1 kernel: DMI 2.3 present.
Feb 17 15:01:14 pc1 kernel: 45 structures occupying 1293 bytes.
Feb 17 15:01:14 pc1 kernel: DMI table at 0x000F24C0.
Feb 17 15:01:14 pc1 kernel: BIOS Vendor: Award Software, Inc.
Feb 17 15:01:14 pc1 kernel: BIOS Version: ASUS CUSL2 ACPI BIOS Revision 1001.A
Feb 17 15:01:14 pc1 kernel: BIOS Release: 06/21/2000
Feb 17 15:01:14 pc1 kernel: System Vendor: System Manufacturer.
Feb 17 15:01:14 pc1 kernel: Product Name: System Name.
Feb 17 15:01:14 pc1 kernel: Version System Version.
Feb 17 15:01:14 pc1 kernel: Serial Number SYS-1234567890.
Feb 17 15:01:14 pc1 kernel: Board Vendor: ASUSTeK Computer INC..
Feb 17 15:01:14 pc1 kernel: Board Name: CUSL2.
Feb 17 15:01:14 pc1 kernel: Board Version: REV 1.xx.
Feb 17 15:01:14 pc1 kernel: Asset Tag: Asset-1234567890.
Feb 17 15:01:14 pc1 kernel: Starting kswapd v1.8
Feb 17 15:01:14 pc1 kernel: i2c-core.o: i2c core module
Feb 17 15:01:14 pc1 kernel: i2c-dev.o: i2c /dev entries driver module
Feb 17 15:01:14 pc1 kernel: i2c-core.o: driver i2c-dev dummy driver registered.
Feb 17 15:01:14 pc1 kernel: i2c-algo-bit.o: i2c bit algorithm module
Feb 17 15:01:14 pc1 kernel: pty: 256 Unix98 ptys configured
Feb 17 15:01:14 pc1 kernel: ISDN subsystem Rev: 1.114/1.94/1.140.6.1/1.85/1.21/1.5
Feb 17 15:01:14 pc1 kernel: HiSax: Linux Driver for passive ISDN cards
Feb 17 15:01:14 pc1 kernel: HiSax: Version 3.5 (kernel)
Feb 17 15:01:14 pc1 kernel: HiSax: Layer1 Revision 2.41.6.1
Feb 17 15:01:14 pc1 kernel: HiSax: Layer2 Revision 2.25
Feb 17 15:01:14 pc1 kernel: HiSax: TeiMgr Revision 2.17
Feb 17 15:01:14 pc1 kernel: HiSax: Layer3 Revision 2.17
Feb 17 15:01:14 pc1 kernel: HiSax: LinkLayer Revision 2.51
Feb 17 15:01:14 pc1 kernel: HiSax: Approval certification valid
Feb 17 15:01:14 pc1 kernel: HiSax: Approved with ELSA Microlink PCI cards
Feb 17 15:01:14 pc1 kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
Feb 17 15:01:14 pc1 kernel: HiSax: Approved with Sedlbauer Speedfax + cards
Feb 17 15:01:14 pc1 kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
Feb 17 15:01:14 pc1 kernel: HiSax: W6692 driver Rev. 1.12.6.2
Feb 17 15:01:14 pc1 kernel: PCI: Found IRQ 5 for device 01:09.0
Feb 17 15:01:14 pc1 kernel: Found: Dynalink/AsusCom IS64PH, I/O base: 0xd800, irq: 5
Feb 17 15:01:14 pc1 kernel: HiSax: IS64PH config irq:5 I/O:d800
Feb 17 15:01:14 pc1 kernel: W6692: Winbond W6692 version (0): W6692 V00
Feb 17 15:01:14 pc1 kernel: W6692 ISTA=0x0
Feb 17 15:01:14 pc1 kernel: W6692 IMASK=0xFF
Feb 17 15:01:14 pc1 kernel: W6692 D_EXIR=0x0
Feb 17 15:01:14 pc1 kernel: W6692 D_EXIM=0xFF
Feb 17 15:01:14 pc1 kernel: W6692 D_RSTA=0xA0
Feb 17 15:01:14 pc1 kernel: Winbond 6692: IRQ 5 count 0
Feb 17 15:01:14 pc1 kernel: Winbond 6692: IRQ 5 count 7
Feb 17 15:01:14 pc1 kernel: HiSax: DSS1 Rev. 2.30
Feb 17 15:01:14 pc1 kernel: HiSax: 2 channels added
Feb 17 15:01:14 pc1 kernel: HiSax: MAX_WAITING_CALLS added
Feb 17 15:01:14 pc1 kernel: Linux video capture interface: v1.00
Feb 17 15:01:14 pc1 kernel: block: queued sectors max/low 82704kB/27568kB, 256 slots per queue
Feb 17 15:01:14 pc1 kernel: loop: enabling 8 loop devices
Feb 17 15:01:14 pc1 kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Feb 17 15:01:14 pc1 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Feb 17 15:01:14 pc1 kernel: PIIX4: IDE controller on PCI bus 00 dev f9
Feb 17 15:01:14 pc1 kernel: PIIX4: chipset revision 1
Feb 17 15:01:14 pc1 kernel: PIIX4: not 100%% native mode: will probe irqs later
Feb 17 15:01:14 pc1 kernel: ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
Feb 17 15:01:14 pc1 kernel: ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio
Feb 17 15:01:14 pc1 kernel: hda: FUJITSU MPE3064AT, ATA DISK drive
Feb 17 15:01:14 pc1 kernel: hdb: IBM-DTLA-307045, ATA DISK drive
Feb 17 15:01:14 pc1 kernel: hdc: RICOH DVD/CDRW MP9060, ATAPI CD/DVD-ROM drive
Feb 17 15:01:14 pc1 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 17 15:01:14 pc1 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb 17 15:01:14 pc1 kernel: hda: 12672450 sectors (6488 MB) w/512KiB Cache, CHS=13410/15/63
Feb 17 15:01:14 pc1 kernel: hdb: 90069840 sectors (46116 MB) w/1916KiB Cache, CHS=5606/255/63
Feb 17 15:01:14 pc1 kernel: ide-cd: passing drive hdc to ide-scsi emulation.
Feb 17 15:01:14 pc1 kernel: Partition check:
Feb 17 15:01:14 pc1 kernel: hda: hda1 hda2 hda3
Feb 17 15:01:14 pc1 kernel: hdb: hdb1
Feb 17 15:01:14 pc1 kernel: udf: registering filesystem
Feb 17 15:01:14 pc1 kernel: Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
Feb 17 15:01:14 pc1 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Feb 17 15:01:14 pc1 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Feb 17 15:01:14 pc1 kernel: i2c-core.o: driver i2c msp3400 driver registered.
Feb 17 15:01:14 pc1 kernel: tvaudio: TV audio decoder + audio/video mux driver
Feb 17 15:01:14 pc1 kernel: tvaudio: known chips: tda9840,tda9873h,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951)
Feb 17 15:01:14 pc1 kernel: i2c-core.o: driver generic i2c audio driver registered.
Feb 17 15:01:14 pc1 kernel: i2c-core.o: driver i2c TV tuner driver registered.
Feb 17 15:01:14 pc1 kernel: i2c-core.o: driver tv card mixer driver registered.
Feb 17 15:01:14 pc1 kernel: bttv: driver version 0.7.50 loaded
Feb 17 15:01:14 pc1 kernel: bttv: using 2 buffers with 2080k (4160k total) for capture
Feb 17 15:01:14 pc1 kernel: bttv: Bt8xx card found (0).
Feb 17 15:01:14 pc1 kernel: PCI: Found IRQ 9 for device 01:0b.0
Feb 17 15:01:14 pc1 kernel: PCI: The same IRQ used for device 00:1f.4
Feb 17 15:01:14 pc1 kernel: PCI: The same IRQ used for device 01:0b.1
Feb 17 15:01:14 pc1 kernel: bttv0: Bt878 (rev 17) at 01:0b.0, irq: 9, latency: 64, memory: 0xf7800000
Feb 17 15:01:14 pc1 kernel: bttv0: subsystem: 0070:13eb => Hauppauge WinTV => card=10
Feb 17 15:01:14 pc1 kernel: bttv0: model: BT878(Hauppauge new (bt878)) [autodetected]
Feb 17 15:01:14 pc1 kernel: bttv0: Hauppauge msp34xx: reset line init
Feb 17 15:01:14 pc1 kernel: i2c-dev.o: Registered 'bt848 #0' as minor 0
Feb 17 15:01:14 pc1 kernel: msp34xx: init: chip=MSP3415D-B3, has NICAM support
Feb 17 15:01:14 pc1 kernel: msp3410: daemon started
Feb 17 15:01:14 pc1 kernel: bttv0: i2c attach [MSP3415D-B3]
Feb 17 15:01:14 pc1 kernel: i2c-core.o: client [MSP3415D-B3] registered to adapter [bt848 #0](pos. 0).
Feb 17 15:01:14 pc1 kernel: tuner: chip found @ 0x61
Feb 17 15:01:14 pc1 kernel: bttv0: i2c attach [(unset)]
Feb 17 15:01:14 pc1 kernel: i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. 1).
Feb 17 15:01:14 pc1 kernel: tvmixer: debug: MSP3415D-B3
Feb 17 15:01:14 pc1 kernel: tvmixer: MSP3415D-B3 (bt848 #0) registered with minor 0
Feb 17 15:01:14 pc1 kernel: tvmixer: debug: (unset)
Feb 17 15:01:14 pc1 kernel: i2c-core.o: adapter bt848 #0 registered as adapter 0.
Feb 17 15:01:14 pc1 kernel: bttv0: Hauppauge eeprom: model=44354, tuner=Philips FM1216 (5)
Feb 17 15:01:14 pc1 kernel: bttv0: i2c: checking for MSP34xx @ 0x80... found
Feb 17 15:01:14 pc1 kernel: bttv0: i2c: checking for TDA9875 @ 0xb0... not found
Feb 17 15:01:14 pc1 kernel: bttv0: i2c: checking for TDA7432 @ 0x8a... not found
Feb 17 15:01:14 pc1 kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann
Feb 17 15:01:14 pc1 kernel: agpgart: Maximum main memory to use for agp memory: 93M
Feb 17 15:01:14 pc1 kernel: agpgart: agpgart: Detected an Intel i815 Chipset.
Feb 17 15:01:14 pc1 kernel: agpgart: AGP aperture is 64M @ 0xf8000000
Feb 17 15:01:14 pc1 kernel: [drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB
Feb 17 15:01:14 pc1 kernel: [drm] Initialized i810 1.1.0 20000928 on minor 63
Feb 17 15:01:14 pc1 kernel: SCSI subsystem driver Revision: 1.00
Feb 17 15:01:14 pc1 kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Feb 17 15:01:14 pc1 kernel: Vendor: RICOH Model: DVD/CDRW MP9060 Rev: 1.60
Feb 17 15:01:14 pc1 kernel: Type: CD-ROM ANSI SCSI revision: 02
Feb 17 15:01:14 pc1 kernel: Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Feb 17 15:01:14 pc1 kernel: sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Feb 17 15:01:14 pc1 kernel: Uniform CD-ROM driver Revision: 3.12
Feb 17 15:01:14 pc1 kernel: es1371: version v0.27 time 12:40:44 Feb 14 2001
Feb 17 15:01:14 pc1 kernel: es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
Feb 17 15:01:14 pc1 kernel: PCI: Found IRQ 9 for device 01:0a.0
Feb 17 15:01:14 pc1 kernel: es1371: found es1371 rev 2 at io 0xd400 irq 9
Feb 17 15:01:14 pc1 kernel: es1371: features: joystick 0x0
Feb 17 15:01:14 pc1 kernel: ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
Feb 17 15:01:14 pc1 kernel: usb.c: registered new driver usbdevfs
Feb 17 15:01:14 pc1 kernel: usb.c: registered new driver hub
Feb 17 15:01:14 pc1 kernel: PCI: Found IRQ 12 for device 00:1f.2
Feb 17 15:01:14 pc1 kernel: PCI: Setting latency timer of device 00:1f.2 to 64
Feb 17 15:01:14 pc1 kernel: uhci.c: USB UHCI at I/O 0xb400, IRQ 12
Feb 17 15:01:14 pc1 kernel: uhci.c: detected 2 ports
Feb 17 15:01:14 pc1 kernel: usb.c: new USB bus registered, assigned bus number 1
Feb 17 15:01:14 pc1 kernel: hub.c: USB hub found
Feb 17 15:01:14 pc1 kernel: hub.c: 2 ports detected
Feb 17 15:01:14 pc1 kernel: PCI: Found IRQ 9 for device 00:1f.4
Feb 17 15:01:14 pc1 kernel: PCI: The same IRQ used for device 01:0b.0
Feb 17 15:01:14 pc1 kernel: PCI: The same IRQ used for device 01:0b.1
Feb 17 15:01:14 pc1 kernel: PCI: Setting latency timer of device 00:1f.4 to 64
Feb 17 15:01:14 pc1 kernel: uhci.c: USB UHCI at I/O 0xb000, IRQ 9
Feb 17 15:01:14 pc1 kernel: uhci.c: detected 2 ports
Feb 17 15:01:14 pc1 kernel: usb.c: new USB bus registered, assigned bus number 2
Feb 17 15:01:14 pc1 kernel: hub.c: USB hub found
Feb 17 15:01:14 pc1 kernel: hub.c: 2 ports detected
Feb 17 15:01:14 pc1 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Feb 17 15:01:14 pc1 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Feb 17 15:01:14 pc1 kernel: IP: routing cache hash table of 512 buckets, 4Kbytes
Feb 17 15:01:14 pc1 kernel: TCP: Hash tables configured (established 8192 bind 8192)
Feb 17 15:01:14 pc1 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Feb 17 15:01:14 pc1 kernel: VFS: Mounted root (ext2 filesystem) readonly.
Feb 17 15:01:14 pc1 kernel: Freeing unused kernel memory: 180k freed
Feb 17 15:01:14 pc1 kernel: hub.c: USB new device connect on bus2/2, assigned device number 3
Feb 17 15:01:14 pc1 kernel: hub.c: USB hub found
Feb 17 15:01:14 pc1 kernel: hub.c: 4 ports detected
Feb 17 15:01:14 pc1 kernel: Adding Swap: 180012k swap-space (priority -1)
next reply other threads:[~2001-02-18 14:18 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-18 14:26 Jon Forsberg [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-02-18 17:49 [PROBLEM] 2.4.1 can't mount ext2 CD-ROM Andries.Brouwer
2001-02-18 19:16 ` Jens Axboe
2001-02-19 1:40 ` Alan Cox
2001-02-19 1:47 ` Jens Axboe
2001-02-19 2:02 ` Alan Cox
2001-02-18 19:34 Andries.Brouwer
2001-02-18 20:49 ` Jens Axboe
2001-02-18 21:11 Andries.Brouwer
2001-02-19 1:43 ` Jens Axboe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010218152624.A506@pc1 \
--to=zzed@cyberdude.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.