From: Shane Wegner <shane@cm.nu>
To: linux-kernel@vger.kernel.org
Subject: IDE trouble under 2.2.19pre16 with Hedrick's IDE patch
Date: Sun, 4 Mar 2001 17:15:28 -0800 [thread overview]
Message-ID: <20010304171528.A4966@cm.nu> (raw)
Hi,
Whenever I write a substantial amount of data (200mb) to
disk, I get these messages. The disks lock for about 10
seconds and then come back for about 10 seconds again.
This continues until the data is successfully written.
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hde: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hde: DMA disabled
hde: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hde: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hde: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hde: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hde: timeout waiting for DMA
ide_dmaproc: chipset supported ide_dma_timeout func only: 14
hde: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
Does anyone happen to know what I can do to fix this? It
happens on Linux 2.4.2 as well. It's an HPT370 controler
on-board. Here is the relevant information.
HPT370: IDE controller on PCI bus 00 dev 70
HPT370: chipset revision 3
HPT370: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xec00-0xec07, BIOS settings: hde:DMA,
hdf:pio
ide3: BM-DMA at 0xec08-0xec0f, BIOS settings: hdg:DMA,
hdh:pio
hde: Maxtor 92720U8, ATA DISK drive
hdg: Maxtor 96147U8, ATA DISK drive
ide2 at 0xdc00-0xdc07,0xe002 on irq 10
ide3 at 0xe400-0xe407,0xe802 on irq 10
hde: Maxtor 92720U8, 25965MB w/2048kB Cache,
CHS=52755/16/63, UDMA(66)
hdg: Maxtor 96147U8, 58623MB w/2048kB Cache,
CHS=119108/16/63, UDMA(66)
continuum:~# cat /proc/ide/hpt366
HPT370 Chipset.
--------------- Primary Channel ---------------- Secondary
Channel -------------
enabled enabled
--------------- drive0 --------- drive1 -------- drive0
---------- drive1 ------
DMA enabled: yes no yes
no
UDMA
DMA
PIO
continuum:~# cat /proc/ide/hde/settings
name value min max
mode
---- ----- --- ---
----
bios_cyl 52755 0
65535 rw
bios_head 16 0 255
rw
bios_sect 63 0 63
rw
breada_readahead 4 0 127
rw
bswap 0 0 1
r
current_speed 68 0 69
rw
file_readahead 124 0
2097151 rw
ide_scsi 0 0 1
rw
init_speed 68 0 69
rw
io_32bit 1 0 3
rw
keepsettings 1 0 1
rw
lun 0 0 7
rw
max_kb_per_request 64 1 127
rw
multcount 8 0 8
rw
nice1 1 0 1
rw
nowerr 0 0 1
rw
number 0 0 3
rw
pio_mode write-only 0 255
w
slow 0 0 1
rw
unmaskirq 1 0 1
rw
using_dma 1 0 1
rw
--
Shane Wegner: shane@cm.nu
http://www.cm.nu/~shane/
PGP: 1024D/FFE3035D
A0ED DAC4 77EC D674 5487
5B5C 4F89 9A4E FFE3 035D
next reply other threads:[~2001-03-05 1:15 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-03-05 1:15 Shane Wegner [this message]
2001-03-06 2:14 ` IDE trouble under 2.2.19pre16 with Hedrick's IDE patch Mike Fedyk
2001-03-06 19:01 ` Jasmeet Sidhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010304171528.A4966@cm.nu \
--to=shane@cm.nu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.