From: Marcus Meissner <Marcus.Meissner@caldera.de>
To: Vincent Sweeney <v.sweeney@dexterus.com>, linux-kernel@vger.kernel.org
Subject: Re: cpqarray & 2.4.1+ hang
Date: Wed, 14 Mar 2001 19:20:27 +0100 [thread overview]
Message-ID: <20010314192027.A11047@caldera.de> (raw)
In-Reply-To: <3AAFB0CE.D1FBD52E@dexterus.com>
[-- Attachment #1: Type: text/plain, Size: 893 bytes --]
> I have a problem with the 2.4 series kernel running on a number of
> Compaq ProLiant DL360 servers. The 2.2.x kernels and 2.4.0 work fine,
> however from 2.4.1 onwards the boxes just hang at the following position
> on bootup:
> Partition check:
> ida/c0d0:
> I have also tested with 2.4.2-ac20 and the same problem occurs. Doing a
> search on the web some people recommend changing the OS setting in the
> Compaq BIOS to Linux fixes this problem, however my servers are already
> running with this BIOS setting and I've also tested with numerous other
> OS's in the BIOS but the same problem occurs.
Workaround: run the kernel with the 'noapic' option on its commandline.
The ServerWorks chipset used in this Compaq Server somehow does not pass
the the relevant information to Linux mapping routines. :/
I have attached lspci -xxx and dmesg output of our DL360 below.
Ciao, Marcus
[-- Attachment #2: lspci.xx --]
[-- Type: text/plain, Size: 6895 bytes --]
00:00.0 Host bridge: Relience Computer CNB20HE (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64, cache line size 08
00: 66 11 09 00 07 01 00 22 05 00 00 06 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:00.1 Host bridge: Relience Computer CNB20HE (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, cache line size 08
00: 66 11 09 00 07 01 00 02 05 00 00 06 08 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:01.0 RAID bus controller: Symbios Logic Inc. (formerly NCR): Unknown device 0010 (rev 02)
Subsystem: Compaq Computer Corporation: Unknown device 4040
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 192 (7500ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 3
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at c5000000 (32-bit, non-prefetchable) [size=16M]
Region 2: Memory at c4000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled] [size=512K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 00 10 10 00 57 01 10 02 02 00 04 01 08 c0 00 00
10: 01 20 00 00 00 00 00 c5 00 00 00 c4 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e 40 40
30: 00 00 00 00 40 00 00 00 00 00 00 00 03 01 1e 08
00:03.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Region 0: Memory at c2000000 (32-bit, prefetchable) [size=16M]
Region 1: I/O ports at 2400 [size=256]
Region 2: Memory at c3fff000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 02 10 56 47 87 00 90 02 7a 00 00 03 08 40 00 00
10: 08 00 00 c2 01 24 00 00 00 f0 ff c3 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 56 47
30: 00 00 00 00 5c 00 00 00 00 00 00 00 ff 00 08 00
00:04.0 System peripheral: Compaq Computer Corporation Advanced System Management Controller
Subsystem: Compaq Computer Corporation: Unknown device b0f3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at c3ffef00 (32-bit, non-prefetchable) [size=256]
00: 11 0e f0 a0 43 01 00 02 00 00 80 08 00 00 00 00
10: 01 18 00 00 00 ef ff c3 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e f3 b0
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 01 00 00
00:0f.0 ISA bridge: Relience Computer: Unknown device 0200 (rev 4f)
Subsystem: Relience Computer: Unknown device 0200
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: 66 11 00 02 07 00 00 02 4f 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 66 11 00 02
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:0f.1 IDE interface: Relience Computer: Unknown device 0211 (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 2800 [size=16]
00: 66 11 11 02 45 01 00 02 00 8a 01 01 00 40 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 28 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
03:04.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
Subsystem: Compaq Computer Corporation: Unknown device b134
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at c6fff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3000 [size=64]
Region 2: Memory at c6e00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: 86 80 29 12 57 01 90 02 08 00 00 02 08 40 00 00
10: 00 f0 ff c6 01 30 00 00 00 00 e0 c6 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e 34 b1
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 08 38
03:05.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
Subsystem: Compaq Computer Corporation: Unknown device b134
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 7
Region 0: Memory at c6dff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3040 [size=64]
Region 2: Memory at c6c00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: 86 80 29 12 57 01 90 02 08 00 00 02 08 40 00 00
10: 00 f0 df c6 41 30 00 00 00 00 c0 c6 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 11 0e 34 b1
30: 00 00 00 00 dc 00 00 00 00 00 00 00 07 01 08 38
[-- Attachment #3: dl360.dmesg --]
[-- Type: text/plain, Size: 11640 bytes --]
Linux version 2.4.2 (root@) (gcc version 2.95.2 19991024 (release)) #4S SMP Fri Mar 9 23:05:30 CET 2001
BIOS-provided physical RAM map:
BIOS-e820: 000000000009f800 @ 0000000000000000 (usable)
BIOS-e820: 0000000000000800 @ 000000000009f800 (reserved)
BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
BIOS-e820: 000000000fefc000 @ 0000000000100000 (usable)
BIOS-e820: 0000000000004000 @ 000000000fffc000 (ACPI data)
BIOS-e820: 0000000000010000 @ 00000000fec00000 (reserved)
BIOS-e820: 0000000000010000 @ 00000000fee00000 (reserved)
BIOS-e820: 0000000000080000 @ 00000000fff80000 (reserved)
Scan SMP from c0000000 for 1024 bytes.
Scan SMP from c009fc00 for 1024 bytes.
Scan SMP from c00f0000 for 65536 bytes.
found SMP MP-table at 000f4ff0
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f2000 reserved twice.
hm, page 000f3000 reserved twice.
On node 0 totalpages: 65532
zone(0): 4096 pages.
zone(1): 61436 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
Virtual Wire compatibility mode.
OEM ID: COMPAQ Product ID: PROLIANT APIC at: 0xFEE00000
Processor #3 Pentium(tm) Pro APIC version 16
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
SEP present.
MTRR present.
PGE present.
MCA present.
CMOV present.
PAT present.
PSE present.
MMX present.
FXSR present.
XMM present.
Bootup CPU
Processor #0 Pentium(tm) Pro APIC version 16
Floating point unit present.
Machine Exception supported.
64 bit compare & exchange supported.
Internal APIC present.
SEP present.
MTRR present.
PGE present.
MCA present.
CMOV present.
PAT present.
PSE present.
MMX present.
FXSR present.
XMM present.
Bus #0 is PCI
Bus #3 is PCI
Bus #9 is ISA
I/O APIC #8 Version 17 at 0xFEC00000.
Int: type 0, pol 3, trig 3, bus 0, IRQ 14, APIC ID 8, APIC INT 15
Int: type 0, pol 3, trig 3, bus 0, IRQ 15, APIC ID 8, APIC INT 14
Int: type 0, pol 3, trig 3, bus 0, IRQ 16, APIC ID 8, APIC INT 15
Int: type 0, pol 3, trig 3, bus 0, IRQ 17, APIC ID 8, APIC INT 14
Int: type 0, pol 3, trig 3, bus 3, IRQ 18, APIC ID 8, APIC INT 17
Int: type 0, pol 3, trig 3, bus 3, IRQ 19, APIC ID 8, APIC INT 16
Int: type 0, pol 3, trig 3, bus 3, IRQ 1a, APIC ID 8, APIC INT 17
Int: type 0, pol 3, trig 3, bus 3, IRQ 1b, APIC ID 8, APIC INT 16
Int: type 0, pol 3, trig 3, bus 0, IRQ 04, APIC ID 8, APIC INT 13
Int: type 0, pol 3, trig 3, bus 0, IRQ 05, APIC ID 8, APIC INT 12
Int: type 0, pol 3, trig 3, bus 3, IRQ 10, APIC ID 8, APIC INT 11
Int: type 0, pol 3, trig 3, bus 3, IRQ 14, APIC ID 8, APIC INT 18
Int: type 0, pol 1, trig 1, bus 9, IRQ 01, APIC ID 8, APIC INT 01
Int: type 0, pol 1, trig 1, bus 9, IRQ 00, APIC ID 8, APIC INT 02
Int: type 0, pol 1, trig 1, bus 9, IRQ 04, APIC ID 8, APIC INT 04
Int: type 0, pol 1, trig 1, bus 9, IRQ 06, APIC ID 8, APIC INT 06
Int: type 0, pol 1, trig 1, bus 9, IRQ 08, APIC ID 8, APIC INT 08
Int: type 0, pol 1, trig 1, bus 9, IRQ 09, APIC ID 8, APIC INT 09
Int: type 0, pol 1, trig 1, bus 9, IRQ 0a, APIC ID 8, APIC INT 0a
Int: type 0, pol 1, trig 1, bus 9, IRQ 0b, APIC ID 8, APIC INT 0b
Int: type 0, pol 1, trig 1, bus 9, IRQ 0c, APIC ID 8, APIC INT 0c
Int: type 0, pol 3, trig 3, bus 9, IRQ 0d, APIC ID 8, APIC INT 0d
Int: type 0, pol 1, trig 1, bus 9, IRQ 0e, APIC ID 8, APIC INT 0e
Int: type 0, pol 1, trig 1, bus 9, IRQ 0f, APIC ID 8, APIC INT 0f
Lint: type 3, pol 0, trig 0, bus 9, IRQ 00, APIC ID ff, APIC LINT 00
Lint: type 1, pol 0, trig 0, bus 9, IRQ 00, APIC ID ff, APIC LINT 01
Int: type 3, pol 0, trig 0, bus 9, IRQ 00, APIC ID 8, APIC INT 00
Processors: 2
mapped APIC to ffffe000 (fee00000)
mapped IOAPIC to ffffd000 (fec00000)
Kernel command line: vga=274 noapic quiet root=/dev/ida/c0d0p1
Initializing CPU#0
Detected 930.465 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1854.66 BogoMIPS
Memory: 254640k/262128k available (1031k kernel code, 7100k reserved, 281k data, 264k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
VFS: Diskquotas version dquot_6.5.0 initialized
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU speed 933Mhz, Bus Speed 133MHz (c6740040)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU speed 933Mhz, Bus Speed 133MHz (c6740040)
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU0: Intel Pentium III (Coppermine) stepping 03
per-CPU timeslice cutoff: 731.26 usecs.
Getting VERSION: 40011
Getting VERSION: 40011
Getting ID: 3000000
Getting ID: c000000
Getting LVT0: 700
Getting LVT1: 400
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
CPU present map: 9
Booting processor 1/0 eip 2000
Setting warm reset code and vector.
1.
2.
3.
Asserting INIT.
Waiting for send to finish...
+Deasserting INIT.
Waiting for send to finish...
+#startup loops: 2.
Sending STARTUP #1.
After apic_write.
Initializing CPU#1
CPU#1 (phys ID: 0) waiting for CALLOUT
Startup point 1.
Waiting for send to finish...
+Sending STARTUP #2.
After apic_write.
Startup point 1.
Waiting for send to finish...
+After Startup.
Before Callout 1.
After Callout 1.
CALLIN, before setup_local_APIC().
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1854.66 BogoMIPS
Stack at about cfff5fbc
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU speed 933Mhz, Bus Speed 133MHz (c6440040)
Intel machine check reporting enabled on CPU#1.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
OK.
CPU1: Intel Pentium III (Coppermine) stepping 03
CPU has booted.
Before bogomips.
Total of 2 processors activated (3709.33 BogoMIPS).
Before bogocount - setting activated=1.
Boot done.
calibrating APIC timer ...
..... CPU clock speed is 930.4502 MHz.
..... host bus clock speed is 132.9214 MHz.
cpu: 0, clocks: 1329214, slice: 443071
CPU0<T0:1329200,T1:886128,D:1,S:443071,C:1329214>
cpu: 1, clocks: 1329214, slice: 443071
CPU1<T0:1329200,T1:443056,D:2,S:443071,C:1329214>
checking TSC synchronization across CPUs: passed.
Setting commenced=1, go go go
mtrr: your CPUs had inconsistent fixed MTRR settings
mtrr: probably your BIOS does not setup all CPUs
PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=3
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Discovered peer bus 03
PCI: Device 00:00 not found by BIOS
PCI: Device 00:01 not found by BIOS
PCI: Device 00:78 not found by BIOS
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
vesafb: framebuffer at 0xa0000, mapped to 0xc00a0000, size 128k
vesafb: mode is 640x480x4, linelength=80, pages=17862
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
pty: 1024 Unix98 ptys configured
block: queued sectors max/low 168936kB/56312kB, 512 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ServerWorks OSB4: IDE controller on PCI bus 00 dev 79
ServerWorks OSB4: chipset revision 0
ServerWorks OSB4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2800-0x2807, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x2808-0x280f, BIOS settings: hdc:pio, hdd:pio
hdc: Compaq CRN-8241B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 565k freed
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md.c: sizeof(mdp_super_t) = 4096
autodetecting RAID arrays
autorun ...
... autorun DONE.
IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem).
SCSI subsystem driver Revision: 1.00
loop: loaded (max 8 devices)
cpqarray: Device 1000 has been found at 0 8
Compaq SMART2 Driver (v 2.4.2)
Found 1 controller(s)
cpqarray: Finding drives on ida0 (Integrated Array)
cpqarray ida/c0d0: blksz=512 nr_blks=17756160
cpqarray: Starting firmware's background processing
Partition check:
ida/c0d0: p1 p2 p3
NTFS version 010116
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=3
Freeing unused kernel memory: 264k freed
Intel(R) PRO/100 Fast Ethernet Adapter - Loadable driver, ver 1.4.21
Copyright (c) 2001 Intel Corporation
eth0: Compaq Fast Ethernet Server Adapter
Mem:0xc6fff000 IRQ:5 Speed:100 Mbps Dx:Half
Hardware receive checksums enabled
eth1: Compaq Fast Ethernet Server Adapter
Mem:0xc6dff000 IRQ:7 Speed:0 Mbps Dx:N/A
Failed to detect cable link.
Speed and duplex will be determined at time of connection.
Hardware receive checksums enabled
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
NET4: Linux IPX 0.46 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
Adding Swap: 310072k swap-space (priority -1)
NET4: AppleTalk 0.18a for Linux NET4.0
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...
SMSC Super-IO detection, now testing Ports 2F0, 370 ...
lp: driver loaded but no devices found
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial driver version 5.05 (2000-12-13) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
next prev parent reply other threads:[~2001-03-14 18:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-03-14 17:56 cpqarray & 2.4.1+ hang Vincent Sweeney
2001-03-14 18:20 ` Marcus Meissner [this message]
2001-03-14 19:07 ` Vincent Sweeney
-- strict thread matches above, loose matches on Subject: below --
2001-03-23 22:23 Cagle, John
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010314192027.A11047@caldera.de \
--to=marcus.meissner@caldera.de \
--cc=linux-kernel@vger.kernel.org \
--cc=v.sweeney@dexterus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.