All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marcus Meissner <Marcus.Meissner@caldera.de>
To: linux-kernel@vger.kernel.org, Alan Cox <alan@lxorguk.ukuu.org.uk>
Subject: [PATCH] misplaced pci_enable_device()s in drivers/sound/
Date: Wed, 18 Apr 2001 18:29:45 +0200	[thread overview]
Message-ID: <20010418182944.A25024@caldera.de> (raw)

Hi,

Several pci_enable_device()s in drivers/sound happen _after_ accessing 
PCI resources. I have moved them before the relevant first accesses.

(Untested, but should work.)

Against 2.4.3-ac9.

Ciao, Marcus

Index: es1370.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/es1370.c,v
retrieving revision 1.13
diff -u -r1.13 es1370.c
--- es1370.c	2001/04/17 17:26:05	1.13
+++ es1370.c	2001/04/18 16:24:05
@@ -2569,6 +2569,9 @@
 	mm_segment_t fs;
 	int i, val;
 
+	if (pci_enable_device(pcidev))
+		return -1;
+
 	if (!RSRCISIOREGION(pcidev, 0))
 		return -1;
 	if (pcidev->irq == 0) 
@@ -2599,8 +2602,6 @@
 		printk(KERN_ERR "es1370: io ports %#lx-%#lx in use\n", s->io, s->io+ES1370_EXTENT-1);
 		goto err_region;
 	}
-	if (pci_enable_device(pcidev))
-		goto err_irq;
 	if (request_irq(s->irq, es1370_interrupt, SA_SHIRQ, "es1370", s)) {
 		printk(KERN_ERR "es1370: irq %u in use\n", s->irq);
 		goto err_irq;
Index: es1371.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/es1371.c,v
retrieving revision 1.7
diff -u -r1.7 es1371.c
--- es1371.c	2001/04/17 17:26:05	1.7
+++ es1371.c	2001/04/18 16:24:20
@@ -2783,6 +2783,9 @@
 	signed long tmo2;
 	unsigned int cssr;
 
+	if (pci_enable_device(pcidev))
+		return -1;
+
 	if (!RSRCISIOREGION(pcidev, 0))
 		return -1;
 	if (pcidev->irq == 0) 
@@ -2822,8 +2825,6 @@
 		printk(KERN_ERR PFX "io ports %#lx-%#lx in use\n", s->io, s->io+ES1371_EXTENT-1);
 		goto err_region;
 	}
-	if (pci_enable_device(pcidev))
-		goto err_irq;
 	if (request_irq(s->irq, es1371_interrupt, SA_SHIRQ, "es1371", s)) {
 		printk(KERN_ERR PFX "irq %u in use\n", s->irq);
 		goto err_irq;
Index: esssolo1.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/esssolo1.c,v
retrieving revision 1.7
diff -u -r1.7 esssolo1.c
--- esssolo1.c	2001/04/17 17:26:05	1.7
+++ esssolo1.c	2001/04/18 16:24:35
@@ -2297,6 +2297,8 @@
 	struct solo1_state *s;
 	struct pm_dev *pmdev;
 
+ 	if (pci_enable_device(pcidev))
+		return -1;
 	if (!RSRCISIOREGION(pcidev, 0) ||
 	    !RSRCISIOREGION(pcidev, 1) ||
 	    !RSRCISIOREGION(pcidev, 2) ||
@@ -2362,8 +2364,6 @@
 		printk(KERN_ERR "solo1: irq %u in use\n", s->irq);
 		goto err_irq;
 	}
- 	if (pci_enable_device(pcidev))
-		goto err_irq;
 	printk(KERN_INFO "solo1: joystick port at %#x\n", s->gameport.io+1);
 	/* register devices */
 	if ((s->dev_audio = register_sound_dsp(&solo1_audio_fops, -1)) < 0)
Index: maestro.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/maestro.c,v
retrieving revision 1.4
diff -u -r1.4 maestro.c
--- maestro.c	2001/04/17 15:49:10	1.4
+++ maestro.c	2001/04/18 16:25:21
@@ -3321,6 +3321,9 @@
 	/* don't pick up weird modem maestros */
 	if(((pcidev->class >> 8) & 0xffff) != PCI_CLASS_MULTIMEDIA_AUDIO)
 		return 0;
+
+	if (pci_enable_device(pcidev))
+		return 0;
 			
 	iobase = SILLY_PCI_BASE_ADDRESS(pcidev); 
 
@@ -3406,19 +3409,6 @@
 	}
 	
 	ess = &card->channels[0];
-
-	if (pci_enable_device(pcidev)) {
-		printk (KERN_ERR "maestro: pci_enable_device() failed\n");
-		for (i = 0; i < NR_DSPS; i++) {
-			struct ess_state *s = &card->channels[i];
-			if (s->dev_audio != -1)
-				unregister_sound_dsp(s->dev_audio);
-		}
-		release_region(card->iobase, 256);
-		unregister_reboot_notifier(&maestro_nb);
-		kfree(card);
-		return 0;
-	}
 
 	/*
 	 *	Ok card ready. Begin setup proper
Index: sonicvibes.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/sonicvibes.c,v
retrieving revision 1.7
diff -u -r1.7 sonicvibes.c
--- sonicvibes.c	2001/04/17 17:26:05	1.7
+++ sonicvibes.c	2001/04/18 16:26:01
@@ -2508,6 +2508,8 @@
 	char *ddmaname;
 	unsigned ddmanamelen;
 
+	if (pci_enable_device(pcidev))
+		return -1;
 	if (!RSRCISIOREGION(pcidev, RESOURCE_SB) ||
 	    !RSRCISIOREGION(pcidev, RESOURCE_ENH) ||
 	    !RSRCISIOREGION(pcidev, RESOURCE_SYNTH) ||
@@ -2594,8 +2596,6 @@
 		printk(KERN_ERR "sv: gameport io ports in use\n");
 		s->gameport.io = s->gameport.size = 0;
 	}
-	if (pci_enable_device(pcidev))
-		goto err_irq;
 	/* initialize codec registers */
 	outb(0x80, s->ioenh + SV_CODEC_CONTROL); /* assert reset */
 	udelay(50);
Index: trident.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/trident.c,v
retrieving revision 1.11
diff -u -r1.11 trident.c
--- trident.c	2001/04/17 17:26:05	1.11
+++ trident.c	2001/04/18 16:26:18
@@ -3309,6 +3309,9 @@
 	struct trident_card *card;
 	u8 revision;
 
+	if (pci_enable_device(pci_dev))
+	    return -ENODEV;
+
 	if (pci_set_dma_mask(pci_dev, TRIDENT_DMA_MASK)) {
 		printk(KERN_ERR "trident: architecture does not support"
 		       " 30bit PCI busmaster DMA\n");
@@ -3322,9 +3325,6 @@
 		       iobase);
 		return -ENODEV;
 	}
-
-	if (pci_enable_device(pci_dev))
-	    return -ENODEV;
 
 	if ((card = kmalloc(sizeof(struct trident_card), GFP_KERNEL)) == NULL) {
 		printk(KERN_ERR "trident: out of memory\n");
Index: via82cxxx_audio.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/via82cxxx_audio.c,v
retrieving revision 1.6
diff -u -r1.6 via82cxxx_audio.c
--- via82cxxx_audio.c	2001/04/17 16:38:46	1.6
+++ via82cxxx_audio.c	2001/04/18 16:26:29
@@ -3020,17 +3020,17 @@
 	if (printed_version++ == 0)
 		printk (KERN_INFO "Via 686a audio driver " VIA_VERSION "\n");
 
+	if (pci_enable_device (pdev)) {
+		rc = -EIO;
+		goto err_out_none;
+	}
+
 	if (!request_region (pci_resource_start (pdev, 0),
 	    		     pci_resource_len (pdev, 0),
 			     VIA_MODULE_NAME)) {
 		printk (KERN_ERR PFX "unable to obtain I/O resources, aborting\n");
 		rc = -EBUSY;
 		goto err_out;
-	}
-
-	if (pci_enable_device (pdev)) {
-		rc = -EIO;
-		goto err_out_none;
 	}
 
 	card = kmalloc (sizeof (*card), GFP_KERNEL);
Index: emu10k1/main.c
===================================================================
RCS file: /build/mm/work/repository/linux-mm/drivers/sound/emu10k1/main.c,v
retrieving revision 1.3
diff -u -r1.3 main.c
--- emu10k1/main.c	2001/04/17 16:55:42	1.3
+++ emu10k1/main.c	2001/04/18 16:27:07
@@ -613,6 +613,9 @@
 	struct emu10k1_card *card;
 	u32 subsysvid;
 
+	if (pci_enable_device(pci_dev))
+		return -ENODEV;
+
 	if ((card = kmalloc(sizeof(struct emu10k1_card), GFP_KERNEL)) == NULL) {
 		printk(KERN_ERR "emu10k1: out of memory\n");
 		return -ENOMEM;
@@ -621,11 +624,6 @@
 
 	if (pci_set_dma_mask(pci_dev, EMU10K1_DMA_MASK)) {
 		printk(KERN_ERR "emu10k1: architecture does not support 32bit PCI busmaster DMA\n");
-		kfree(card);
-		return -ENODEV;
-	}
-
-	if (pci_enable_device(pci_dev)) {
 		kfree(card);
 		return -ENODEV;
 	}

             reply	other threads:[~2001-04-18 16:30 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-04-18 16:29 Marcus Meissner [this message]
2001-04-18 16:55 ` [PATCH] misplaced pci_enable_device()s in drivers/sound/ Jeff Garzik
2001-04-18 17:20   ` Marcus Meissner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20010418182944.A25024@caldera.de \
    --to=marcus.meissner@caldera.de \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.