All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Eric S. Raymond" <esr@thyrsus.com>
To: alan@lxorguk.ukuu.org.uk
Cc: linux-kernel@vger.kernel.org, kbuild-devel@lists.sourceforge.net
Subject: More Configuration.help entries
Date: Fri, 20 Apr 2001 11:31:43 -0400	[thread overview]
Message-ID: <20010420113143.A7187@thyrsus.com> (raw)

These are courtesy of Kai Germaschewski.

--- Configure.help	2001/04/20 15:17:03	1.2
+++ Configure.help	2001/04/20 15:25:53
@@ -15540,6 +15540,16 @@
   This enables HiSax support for the AMD7930 chips on some SPARCs.
   This code is not finished yet.
 
+ELSA PCMCIA MicroLink cards
+CONFIG_HISAX_ELSA_CS
+  This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
+  card.
+
+Sedlbauer PCMCIA cards
+CONFIG_HISAX_SEDLBAUER_CS
+  This enables the PCMCIA client driver for the Sedlbauer Speed Star
+  and Speed Star II cards.
+
 PCBIT-D support
 CONFIG_ISDN_DRV_PCBIT
   This enables support for the PCBIT ISDN-card. This card is
@@ -15613,6 +15623,33 @@
   compile it as a module, say M here and read
   Documentation/modules.txt.
 
+CAPI2.0 /dev/capi20 support
+CONFIG_ISDN_CAPI_CAPI20
+  This option will provide the CAPI 2.0 interface to userspace
+  applications via /dev/capi20. Applications should use the standardized
+  libcapi20 to access this functionality. You should say Y/M here.
+
+CAPI2.0 Middleware support
+CONFIG_ISDN_CAPI_MIDDLEWARE
+  This option will enhance the capabilities of the /dev/capi20 interface.
+  It will provide a means of moving a data connection, established
+  via the usual /dev/capi20 interface to a special tty device. If you want
+  to use pppd with pppdcapiplugin to dial up to your ISP, say Y here.
+
+CAPI2.0 filesystem support
+CONFIG_ISDN_CAPI_CAPIFS_BOOL
+  This option provides a special file system, similar to /dev/pts with
+  device nodes for the special ttys established by using the middleware
+  extension above. If you want to use pppd with pppdcapiplugin to dial up
+  to your ISP, say Y here.
+
+CAPI2.0 capidrv interface support
+CONFIG_ISDN_CAPI_CAPIDRV
+  This option provides the glue code to hook up CAPI driven cards to
+  the legacy isdn4linux link layer. If you have a card which is supported
+  by a CAPI driver, but still want to use old features like ippp
+  interfaces or ttyI emulation, say Y/M here.
+
 AVM B1 ISA support
 CONFIG_ISDN_DRV_AVMB1_B1ISA
   Enable support for the ISA version of the AVM B1 card.
@@ -15633,6 +15670,11 @@
 AVM B1/M1/M2 PCMCIA support
 CONFIG_ISDN_DRV_AVMB1_B1PCMCIA
   Enable support for the PCMCIA version of the AVM B1 card.
+
+AVM B1/M1/M2 PCMCIA cs module
+CONFIG_ISDN_DRV_AVMB1_AVM_CS
+  Enable the PCMCIA client driver for the AVM B1/M1/M2
+  PCMCIA cards.
 
 AVM T1/T1-B PCI support
 CONFIG_ISDN_DRV_AVMB1_T1PCI

-- 
		<a href="http://www.tuxedo.org/~esr/">Eric S. Raymond</a>

Society in every state is a blessing, but government even in its best
state is but a necessary evil; in its worst state an intolerable one;
for when we suffer, or are exposed to the same miseries *by a
government*, which we might expect in a country *without government*,
our calamities is heightened by reflecting that we furnish the means
by which we suffer."
	-- Thomas Paine

                 reply	other threads:[~2001-04-20 15:31 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20010420113143.A7187@thyrsus.com \
    --to=esr@thyrsus.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=kbuild-devel@lists.sourceforge.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.