From: r_letot@yahoo.com
To: linux-kernel@vger.kernel.org
Subject: Oops on 2.2 (somewhere in ext2 ?)
Date: Fri, 11 May 2001 12:27:15 +0200 [thread overview]
Message-ID: <20010511122715.A585@hal> (raw)
Hi all,
I had an oops some days ago which I posted.
Here is a new one... well, actually 4 new ones :-(
I had to reboot before I could ksymoops my logs because the box was frozen
hard, so I don't know if the ksymoops output is valid (I can't judge, I
don't know what it should look like :-)
Here it comes :
first a dmesg
-----
Linux version 2.2.17 (root@hal) (gcc version 2.7.2.3) #1 Mon Nov 20 18:33:32 CET 2000
Detected 737031 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1471.28 BogoMIPS
Memory: 256816k/262016k available (1564k kernel code, 416k reserved, 3076k data, 144k init)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Pentium III (Coppermine) stepping 03
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xf0d90
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13)
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 4096K size
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=244b
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio
hda: ASUS CD-S500/A, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 50X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sim710: No NCR53C710 adapter found.
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0
sym53c8xx: at PCI bus 2, device 11, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c860 detected with Symbios NVRAM
sym53c860-0: rev=0x02, base=0xeb800000, io_port=0xd800, irq=9
sym53c860-0: NCR clock is 80074KHz, 80074KHz
sym53c860-0: Symbios format NVRAM, ID 7, Fast-20, Parity Checking
sym53c860-0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym53c860-0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 05/ce/a0/00/08/00
sym53c860-0: resetting, command processing suspended for 2 seconds
sym53c860-0: restart (scsi reset).
ncr53c8xx: at PCI bus 2, device 11, function 0
ncr53c8xx: IO region 0xd800 to 0xd87f is in use
sym53c860-0: command processing resumed
Adaptec: Reading the hardware resource table. This could take up to 5 minutes
Adaptec: Hardware resource table read.
Failed initialization of WD-7000 SCSI card!
megaraid: v107 (December 22, 1999)
aec671x_detect:
3w-xxxx: tw_findcards(): No cards found.
scsi0 : sym53c8xx - version 1.3g
scsi1 : Vendor: Adaptec Model: 2100S Rev: 320R
scsi : 2 hosts.
Vendor: HP Model: HP35480A Rev: M902
Type: Sequential-Access ANSI SCSI revision: 02
Vendor: ADAPTEC Model: MAIN Rev: 320R
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi1, channel 0, id 0, lun 0
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 71716864 [35018 MB] [35.0 GB]
Partition check:
sda: sda1 sda2 sda3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 144k freed
NET4: Unix domain sockets 1.0 for Linux NET4.0.
Adding Swap: 248996k swap-space (priority -1)
3c59x.c:v0.99H 12Jun00 Donald Becker and others http://www.scyld.com/network/vortex.html
eth0: 3Com 3c905C Tornado at 0xd400, 00:01:02:db:e4:9c, IRQ 9
8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
MII transceiver found at address 24, status 782d.
Enabling bus-master transmits and whole-frame receives.
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
NET4: AppleTalk 0.18 for Linux NET4.0
Then the log :
------
May 11 11:33:28 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:33:28 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:34:34 hal kernel: Oops: 0000
May 11 11:34:34 hal kernel: CPU: 0
May 11 11:34:34 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:34:34 hal kernel: EFLAGS: 00010202
May 11 11:34:34 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000004 edx: 0000002f
May 11 11:34:34 hal kernel: esi: c2ff7b41 edi: 00000003 ebp: cf9265a0 esp: cb5dbf00
May 11 11:34:34 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:34:34 hal kernel: Process imapd (pid: 17357, process nr: 33, stackpage=cb5db000)
May 11 11:34:34 hal kernel: Stack: cfcbc060 c2ff7b2c caa18540 c2ff7b3c 00000004 0006e9b5 c0146c61 c2ff7b2c
May 11 11:34:34 hal kernel: cfcbc060 00000003 c2ff7a90 cb5da000 cb5b7760 cfcbc060 cfcbc060 c2eca001
May 11 11:34:34 hal kernel: c012ccf4 cb5b7760 cfcbc060 0000000b cb5b7760 c2eca006 0000000b c012ce68
May 11 11:34:34 hal kernel: Call Trace: [ext2_follow_link+101/132] [do_follow_link+76/136] [lookup_dentry+312/428] [__namei+41/92] [sys_newstat+19/100] [system_call+52/56]
May 11 11:34:34 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4 08 85 c0
May 11 11:35:25 hal kernel: Oops: 0000
May 11 11:35:25 hal kernel: CPU: 0
May 11 11:35:25 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:35:25 hal kernel: EFLAGS: 00010202
May 11 11:35:25 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx: 00000000
May 11 11:35:25 hal kernel: esi: c57f5018 edi: 00000001 ebp: cf9265a0 esp: cba63f78
May 11 11:35:25 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:35:25 hal kernel: Process smbd (pid: 16477, process nr: 60, stackpage=cba63000)
May 11 11:35:25 hal kernel: Stack: 00000001 bffffbfc c57f5000 c57f5010 00000008 2845f255 c012cf05 c57f5000
May 11 11:35:25 hal kernel: 00000000 00000001 cba62000 0811c410 0811c370 c01252e2 08111c00 00000001
May 11 11:35:25 hal kernel: cba62000 0811c410 c010a0a8 08111c00 08111c18 0811c370 0811c410 0811c370
May 11 11:35:25 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104] [system_call+52/56] [startup_32+43/285]
May 11 11:35:25 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4 08 85 c0
May 11 11:35:25 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:35:46 hal last message repeated 11 times
May 11 11:35:48 hal kernel: Oops: 0000
May 11 11:35:48 hal kernel: CPU: 0
May 11 11:35:48 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:35:48 hal kernel: EFLAGS: 00010202
May 11 11:35:48 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx: 00000000
May 11 11:35:48 hal kernel: esi: c3333018 edi: 00000001 ebp: cf9265a0 esp: c4e25f78
May 11 11:35:48 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:35:48 hal kernel: Process smbd (pid: 16470, process nr: 25, stackpage=c4e25000)
May 11 11:35:48 hal kernel: Stack: 00000001 bffffbfc c3333000 c3333010 00000008 2845f255 c012cf05 c3333000
May 11 11:35:48 hal kernel: 00000000 00000001 c4e24000 0811c410 0811c370 c01252e2 08111c00 00000001
May 11 11:35:48 hal kernel: c4e24000 0811c410 c010a0a8 08111c00 08111c18 0811c370 0811c410 0811c370
May 11 11:35:48 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104] [system_call+52/56] [startup_32+43/285]
May 11 11:35:48 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4 08 85 c0
May 11 11:35:48 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:36:16 hal last message repeated 13 times
May 11 11:36:25 hal kernel: Oops: 0000
May 11 11:36:25 hal kernel: CPU: 0
May 11 11:36:25 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:36:25 hal kernel: EFLAGS: 00010202
May 11 11:36:25 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx: 00000000
May 11 11:36:25 hal kernel: esi: ca050018 edi: 00000001 ebp: cf9265a0 esp: c51fdf78
May 11 11:36:25 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:36:25 hal kernel: Process smbd (pid: 16494, process nr: 84, stackpage=c51fd000)
May 11 11:36:25 hal kernel: Stack: 00000001 bffffbfc ca050000 ca050010 00000008 2845f255 c012cf05 ca050000
May 11 11:36:25 hal kernel: 00000000 00000001 c51fc000 0811c410 0811c370 c01252e2 08111c00 00000001
May 11 11:36:25 hal kernel: c51fc000 0811c410 c010a0a8 08111c00 08111c18 0811c370 0811c410 0811c370
May 11 11:36:25 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104] [system_call+52/56] [startup_32+43/285]
May 11 11:36:25 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4 08 85 c0
May 11 11:36:25 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:36:33 hal last message repeated 7 times
May 11 11:37:51 hal last message repeated 6 times
May 11 11:40:37 hal kernel: swap_free: Trying to free nonexistent swap-page
May 11 11:41:04 hal last message repeated 7 times
May 11 11:42:18 hal last message repeated 2 times
then ksymoops' output (the defaults are valid, but I had to reboot so maybe
the output is not valid):
------
ksymoops 2.3.4 on i686 2.2.17. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.2.17/ (default)
-m /boot/System.map-2.2.17 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
May 11 11:34:34 hal kernel: Oops: 0000
May 11 11:34:34 hal kernel: CPU: 0
May 11 11:34:34 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:34:34 hal kernel: EFLAGS: 00010202
May 11 11:34:34 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000004 edx: 0000002f
May 11 11:34:34 hal kernel: esi: c2ff7b41 edi: 00000003 ebp: cf9265a0 esp: cb5dbf00
May 11 11:34:34 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:34:34 hal kernel: Process imapd (pid: 17357, process nr: 33, stackpage=cb5db000)
May 11 11:34:34 hal kernel: Stack: cfcbc060 c2ff7b2c caa18540 c2ff7b3c 00000004 0006e9b5 c0146c61 c2ff7b2c
May 11 11:34:34 hal kernel: cfcbc060 00000003 c2ff7a90 cb5da000 cb5b7760 cfcbc060 cfcbc060 c2eca001
May 11 11:34:34 hal kernel: c012ccf4 cb5b7760 cfcbc060 0000000b cb5b7760 c2eca006 0000000b c012ce68
May 11 11:34:34 hal kernel: Call Trace: [ext2_follow_link+101/132] [do_follow_link+76/136] [lookup_dentry+312/428] [__namei+41/92] [sys_newstat+19/100] [system_call+52/56]
May 11 11:34:34 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4 08 85 c0
Using defaults from ksymoops -t elf32-i386 -a i386
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 50 04 mov 0x4(%eax),%edx
Code; 00000003 Before first symbol
3: 85 d2 test %edx,%edx
Code; 00000005 Before first symbol
5: 74 13 je 1a <_EIP+0x1a> 0000001a Before first symbol
Code; 00000007 Before first symbol
7: 8d 44 24 14 lea 0x14(%esp,1),%eax
Code; 0000000b Before first symbol
b: 50 push %eax
Code; 0000000c Before first symbol
c: 55 push %ebp
Code; 0000000d Before first symbol
d: ff d2 call *%edx
Code; 0000000f Before first symbol
f: 83 c4 08 add $0x8,%esp
Code; 00000012 Before first symbol
12: 85 c0 test %eax,%eax
May 11 11:35:25 hal kernel: Oops: 0000
May 11 11:35:25 hal kernel: CPU: 0
May 11 11:35:25 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:35:25 hal kernel: EFLAGS: 00010202
May 11 11:35:25 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx: 00000000
May 11 11:35:25 hal kernel: esi: c57f5018 edi: 00000001 ebp: cf9265a0 esp: cba63f78
May 11 11:35:25 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:35:25 hal kernel: Process smbd (pid: 16477, process nr: 60, stackpage=cba63000)
May 11 11:35:25 hal kernel: Stack: 00000001 bffffbfc c57f5000 c57f5010 00000008 2845f255 c012cf05 c57f5000
May 11 11:35:25 hal kernel: 00000000 00000001 cba62000 0811c410 0811c370 c01252e2 08111c00 00000001
May 11 11:35:25 hal kernel: cba62000 0811c410 c010a0a8 08111c00 08111c18 0811c370 0811c410 0811c370
May 11 11:35:25 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104] [system_call+52/56] [startup_32+43/285]
May 11 11:35:25 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4 08 85 c0
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 50 04 mov 0x4(%eax),%edx
Code; 00000003 Before first symbol
3: 85 d2 test %edx,%edx
Code; 00000005 Before first symbol
5: 74 13 je 1a <_EIP+0x1a> 0000001a Before first symbol
Code; 00000007 Before first symbol
7: 8d 44 24 14 lea 0x14(%esp,1),%eax
Code; 0000000b Before first symbol
b: 50 push %eax
Code; 0000000c Before first symbol
c: 55 push %ebp
Code; 0000000d Before first symbol
d: ff d2 call *%edx
Code; 0000000f Before first symbol
f: 83 c4 08 add $0x8,%esp
Code; 00000012 Before first symbol
12: 85 c0 test %eax,%eax
May 11 11:35:48 hal kernel: Oops: 0000
May 11 11:35:48 hal kernel: CPU: 0
May 11 11:35:48 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:35:48 hal kernel: EFLAGS: 00010202
May 11 11:35:48 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx: 00000000
May 11 11:35:48 hal kernel: esi: c3333018 edi: 00000001 ebp: cf9265a0 esp: c4e25f78
May 11 11:35:48 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:35:48 hal kernel: Process smbd (pid: 16470, process nr: 25, stackpage=c4e25000)
May 11 11:35:48 hal kernel: Stack: 00000001 bffffbfc c3333000 c3333010 00000008 2845f255 c012cf05 c3333000
May 11 11:35:48 hal kernel: 00000000 00000001 c4e24000 0811c410 0811c370 c01252e2 08111c00 00000001
May 11 11:35:48 hal kernel: c4e24000 0811c410 c010a0a8 08111c00 08111c18 0811c370 0811c410 0811c370
May 11 11:35:48 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104] [system_call+52/56] [startup_32+43/285]
May 11 11:35:48 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4 08 85 c0
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 50 04 mov 0x4(%eax),%edx
Code; 00000003 Before first symbol
3: 85 d2 test %edx,%edx
Code; 00000005 Before first symbol
5: 74 13 je 1a <_EIP+0x1a> 0000001a Before first symbol
Code; 00000007 Before first symbol
7: 8d 44 24 14 lea 0x14(%esp,1),%eax
Code; 0000000b Before first symbol
b: 50 push %eax
Code; 0000000c Before first symbol
c: 55 push %ebp
Code; 0000000d Before first symbol
d: ff d2 call *%edx
Code; 0000000f Before first symbol
f: 83 c4 08 add $0x8,%esp
Code; 00000012 Before first symbol
12: 85 c0 test %eax,%eax
May 11 11:36:25 hal kernel: Oops: 0000
May 11 11:36:25 hal kernel: CPU: 0
May 11 11:36:25 hal kernel: EIP: 0010:[lookup_dentry+201/428]
May 11 11:36:25 hal kernel: EFLAGS: 00010202
May 11 11:36:25 hal kernel: eax: 00000008 ebx: cda5e220 ecx: 00000008 edx: 00000000
May 11 11:36:25 hal kernel: esi: ca050018 edi: 00000001 ebp: cf9265a0 esp: c51fdf78
May 11 11:36:25 hal kernel: ds: 0018 es: 0018 ss: 0018
May 11 11:36:25 hal kernel: Process smbd (pid: 16494, process nr: 84, stackpage=c51fd000)
May 11 11:36:25 hal kernel: Stack: 00000001 bffffbfc ca050000 ca050010 00000008 2845f255 c012cf05 ca050000
May 11 11:36:25 hal kernel: 00000000 00000001 c51fc000 0811c410 0811c370 c01252e2 08111c00 00000001
May 11 11:36:25 hal kernel: c51fc000 0811c410 c010a0a8 08111c00 08111c18 0811c370 0811c410 0811c370
May 11 11:36:25 hal kernel: Call Trace: [__namei+41/92] [sys_chdir+14/104] [system_call+52/56] [startup_32+43/285]
May 11 11:36:25 hal kernel: Code: 8b 50 04 85 d2 74 13 8d 44 24 14 50 55 ff d2 83 c4 08 85 c0
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 50 04 mov 0x4(%eax),%edx
Code; 00000003 Before first symbol
3: 85 d2 test %edx,%edx
Code; 00000005 Before first symbol
5: 74 13 je 1a <_EIP+0x1a> 0000001a Before first symbol
Code; 00000007 Before first symbol
7: 8d 44 24 14 lea 0x14(%esp,1),%eax
Code; 0000000b Before first symbol
b: 50 push %eax
Code; 0000000c Before first symbol
c: 55 push %ebp
Code; 0000000d Before first symbol
d: ff d2 call *%edx
Code; 0000000f Before first symbol
f: 83 c4 08 add $0x8,%esp
Code; 00000012 Before first symbol
12: 85 c0 test %eax,%eax
1 warning issued. Results may not be reliable.
Do you need something else ?
--
Remi
reply other threads:[~2001-05-11 10:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010511122715.A585@hal \
--to=r_letot@yahoo.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.