From: J Brook <jbk@postmark.net>
To: linux-kernel@vger.kernel.org
Cc: manfred@colorfullife.com
Subject: Re: tulip driver BROKEN in 2.4.5-pre4
Date: Mon, 21 May 2001 11:50:16 +0000 [thread overview]
Message-ID: <20010521115016.5262.qmail@venus.postmark.net> (raw)
> Could you post the output of
>
> #tulip-diag -mm -aa -f
>
> with the broken driver?
> Some code that's required for Linksys Tulip clones was moved
> from pnic specific part into the generic part, perhaps that
> causes problems.
Here is the output from the kernels I've tested to try to get the
driver working:
2.4.4-ac6, this kernel works!
tulip-diag.c:v2.06 1/8/2001 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Digital DC21041 Tulip adapter at 0xd800.
Digital DC21041 Tulip chip registers at 0xd800:
0x00: ffe08000 ffffffff ffffffff 0129f000 0129f200 fc660000 fffe2002
ffffebef
0x40: fffe0000 ffff03ff ffffffff fffe0000 000001c8 ffffef05 ffffff3f
ffff0008
Port selection is half-duplex.
Transmit started, Receive started, half-duplex.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit unit is set to store-and-forward.
The NWay status register is 000001c8.
No MII transceivers found!
Internal autonegotiation state is 'Autonegotiation disabled'.
--------------------------------------------------------------
2.4.5-pre4 this kernel doesn't work
tulip-diag.c:v2.06 1/8/2001 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Digital DC21041 Tulip adapter at 0xd800.
Digital DC21041 Tulip chip registers at 0xd800:
0x00: ffe08000 ffffffff ffffffff 0129e000 0129e200 fc660000 fffe2202
ffffebef
0x40: fffe0000 ffff03ff ffffffff fffe0000 000050c8 ffffef01 ffffffff
ffff0008
Port selection is full-duplex.
Transmit started, Receive started, full-duplex.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit unit is set to store-and-forward.
The NWay status register is 000050c8.
No MII transceivers found!
Internal autonegotiation state is 'Negotiation complete'.
--------------------------------------------------------------
2.4.4-ac9 with tulip 1.1.7 driver (from sf.net/projects/tulip)
tulip-diag.c:v2.06 1/8/2001 Donald Becker (becker@scyld.com)
http://www.scyld.com/diag/index.html
Index #1: Found a Digital DC21041 Tulip adapter at 0xd800.
Digital DC21041 Tulip chip registers at 0xd800:
0x00: ffe08000 ffffffff ffffffff 0129f000 0129f200 fc660000 fffe2202
ffffebef
0x40: fffe0000 ffff03ff ffffffff fffe0000 000050c8 ffffef01 ffffffff
ffff0008
Port selection is full-duplex.
Transmit started, Receive started, full-duplex.
The Rx process state is 'Waiting for packets'.
The Tx process state is 'Idle'.
The transmit unit is set to store-and-forward.
The NWay status register is 000050c8.
No MII transceivers found!
Internal autonegotiation state is 'Negotiation complete'.
Let me know if I can provide any more useful information about the
driver problem.
John
----------------
jbk@postmark.net
next reply other threads:[~2001-05-21 13:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-05-21 11:50 J Brook [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-05-21 9:54 tulip driver BROKEN in 2.4.5-pre4 Studierende der Universitaet des Saarlandes
2001-05-24 2:24 ` Johan Kullstam
2001-05-21 1:37 J Brook
2001-05-23 21:39 ` Lukasz Trabinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010521115016.5262.qmail@venus.postmark.net \
--to=jbk@postmark.net \
--cc=linux-kernel@vger.kernel.org \
--cc=manfred@colorfullife.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.