From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from rhirst.linuxcare.com (pc1-hems4-0-cust171.bre.cable.ntl.com [213.105.88.171]) by dsl2.external.hp.com (Postfix) with ESMTP id ACF9D482A for ; Wed, 23 May 2001 02:00:53 -0600 (MDT) Received: by rhirst.linuxcare.com (Postfix, from userid 501) id 1BF50B008; Wed, 23 May 2001 08:58:33 +0100 (BST) Date: Wed, 23 May 2001 08:58:33 +0100 From: Richard Hirst To: Tom Hansen Cc: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] Problems booting .61 ISO on 715/75 Message-ID: <20010523085833.O8736@linuxcare.com> References: <5.1.0.14.0.20010520213045.029610c0@mail.execpc.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <5.1.0.14.0.20010520213045.029610c0@mail.execpc.com>; from tomh@execpc.com on Sun, May 20, 2001 at 09:35:01PM -0500 List-ID: Hi, I don't think 715/old (which includes 715/75) have STI graphics, so I wouldn't expect that to work. In any case, my 715/75 hangs later during install (serial console). I think that is due to problems with glibc (misaligned locks), which should be fixed in glibc 2.2.3 some time soon. Richard On Sun, May 20, 2001 at 09:35:01PM -0500, Tom Hansen wrote: > > I have just downloaded the 0.61 ISO: > > palinux-0.6-32STI.iso.gz > > from the HP site, burned a CD, and booted from the CD on my 715/75 Apollo, > 160MB, Toshiba 5701 CD-ROM. I'm using the built-in console, I don't have a > serial console. > > After what appears to be a successful start to the boot sequence (it > identifies devices OK, etc.) it gets as far as the line: > > Console: colour dummy device 80x25 > > After this line is displayed, the CD is accessed for about 2 or 3 more > seconds, after which everything stops. > > Any ideas? > > > -- > Tom Hansen > tomh@execpc.com > > > > _______________________________________________ > parisc-linux mailing list > parisc-linux@lists.parisc-linux.org > http://lists.parisc-linux.org/cgi-bin/mailman/listinfo/parisc-linux >