From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.ehlo.com (mail.ehlo.com [208.185.90.252]) by dsl2.external.hp.com (Postfix) with ESMTP id 8936D482A for ; Sat, 26 May 2001 07:51:22 -0600 (MDT) Received: from james by mail.ehlo.com with local (Exim 3.22 #1) id 153eTM-000A7A-00 for parisc-linux@lists.parisc-linux.org; Sat, 26 May 2001 09:51:16 -0400 Date: Sat, 26 May 2001 09:51:16 -0400 From: James FitzGibbon To: parisc-linux@lists.parisc-linux.org Message-ID: <20010526095116.A38860@ehlo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [parisc-linux] Install CD causes reboot on 712/80 List-ID: I'm new to PARISC-Linux. I've had a 712/80 sitting around for a few years and thought I'd give it a go. Using the palinux-0.6.1-32STI.iso image, I burned a CD and attempted to install. The boot process in and of itself went fine. The kernel came up, reported all of the devices that are shown for this model in the hardware database. After init entered runlevel 2, the message "Setting up /tmp and /var/log ramdisks" was displayed. About 5 seconds after that, the system rebooted. I've tried futzing around with the SCSI ids with no luck. Does anyone have an idea or procedure I can try to get around this or find out more information as to why it's happening? I'm going to try the 0.6 image as well as the serial console one in the meantime (I have firmware 2.3, so I should be OK to go back and forth). Thanks. -- j.