From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from puffin.external.hp.com (puffin.external.hp.com [192.25.206.4]) by dsl2.external.hp.com (Postfix) with ESMTP id 31DCD482A for ; Mon, 4 Jun 2001 13:48:28 -0600 (MDT) Message-Id: <200106041940.NAA13519@puffin.external.hp.com> To: Thomas Bogendoerfer Cc: parisc-linux@lists.parisc-linux.org Subject: Re: [parisc-linux] Problems with 0.9 ISO Images from mkhppa1.esiee.fr In-Reply-To: Your message of "Mon, 04 Jun 2001 17:08:41 +0200." <20010604170841.A8900@solo.franken.de> Date: Mon, 04 Jun 2001 13:40:50 -0600 From: Grant Grundler List-ID: Thomas Bogendoerfer wrote: ... > Another question: I've tried the 64bit kernel on the C200 and got a > system not supported error. Is this a known problem or is the C200 > really too old ? That's exactly the model which Ryan Bradetich was trying to get working. He's got the 64-bit PDC wrapper calls working but then ran into problems with SCSI...I don't have a C200 and I didn't have time to followup either. So I don't think it quite works yet - but it's not much more work either. I suggest installing 32-bit w/serial console (should work fine) and then work on 64-bit support. > J282 (which AFAIK is older) booted the 64bit kernel > just fine, but had some problems with the interrupt of the serial console > during install. J282 might have serial on Dino and Clement (ESIEE) just hacked some support for that...but I know it's not on the 0.9 ISOs. Booting from a lifimage (newer kernel plus Dino patch) might work better. BTW, Rbrad suspects current ccio driver is buggy and some older version works better. One which doesn't try to coalesce dma_map_sg() block lists. grant Grant Grundler parisc-linux {PCI|IOMMU|SMP} hacker +1.408.447.7253