From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from rhirst.linuxcare.com (pc2-hems4-0-cust95.bre.cable.ntl.com [213.107.176.95]) by dsl2.external.hp.com (Postfix) with ESMTP id 62662482B for ; Fri, 6 Jul 2001 05:20:06 -0600 (MDT) Received: by rhirst.linuxcare.com (Postfix, from userid 501) id 3F86AB00C; Fri, 6 Jul 2001 12:19:20 +0100 (BST) Date: Fri, 6 Jul 2001 12:19:20 +0100 From: Richard Hirst To: Timothy Ball Cc: Parisc Linux Mailing List Subject: Re: [parisc-linux] booting images Message-ID: <20010706121920.R23509@linuxcare.com> References: <20010703151202.H19064@gwyn.tux.org> <20010704133802.K19064@gwyn.tux.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii In-Reply-To: <20010704133802.K19064@gwyn.tux.org>; from timball@tux.org on Wed, Jul 04, 2001 at 01:38:02PM -0400 List-ID: On Wed, Jul 04, 2001 at 01:38:02PM -0400, Timothy Ball wrote: > On Tue, Jul 03, 2001 at 03:12:02PM -0400, Timothy Ball wrote: > > I have a 735 and have had a bit of a time to try to get this thing to > > boot and install. I have downloaded the palinux-0.9-32sti.iso.gz file > > from the parisc website. Is there anything special I have to do to this > > image to make it bootable? > > Okay I got the iso and it's booting... but then it gets down to these > last few lines: > > --snip--snip--snip-- > CPU(s): 1x PA7100 (PCX-T) at 125.000000 MHz > Kernel command line: HOME=/ TERM=linux root=/dev/ram console=tty0 sti=0 > sti_font=VGA8x16 > Console: colour dummy device 80x25 > --snip--snip--snip-- > > Then it hangs... Not sure what to do... http://mkhppa1.esiee.fr/list.html says 735 is only known to work with serial console. Don't know if that is still valid. You should try the 0.9.1 ISO available from ESIEE, but please wait until they have fixed it - the one currently available does not boot at all! Richard