From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Tue, 10 Jul 2001 11:06:56 -0500 From: AJ Lewis Subject: Re: [linux-lvm] vg gone after vgextend Message-ID: <20010710110656.A24243@sistina.com> References: <20010710093902.B30416@zendo.net> Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-md5; protocol="application/pgp-signature"; boundary="Kj7319i9nmIyA2yE" Content-Disposition: inline In-Reply-To: <20010710093902.B30416@zendo.net>; from lvm@zendo.net on Tue, Jul 10, 2001 at 09:39:02AM -0500 Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: List-Id: To: linux-lvm@sistina.com --Kj7319i9nmIyA2yE Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Goto ftp://ftp.sistina.com/pub/LVM/contrib and get uuid_fixer-0.3-IOP10.tar.gz Read the README. Run it on your system, then run vgscan. It should fix your problem. If not, let me know. On Tue, Jul 10, 2001 at 09:39:02AM -0500, Eli Criffield wrote: > I had LVM up and working great, even on the / filesystem. I had a > /dev/hda1 that was a 4 gig filesystem that i tared my distribution to and > /dev/hda2 that use to be my / filesystem and /dev/hda3 that was my volume > group. I resized /dev/hda1 down to around 30 megs and made /dev/hda2 > 4+gig. I made /dev/hda1 /boot and had a initrd to turn on LVM and boot to > the / filesystem on /dev/rootvg/root_lv. That all worked fine. >=20 > Until i added /dev/hda2 (now about 4gig) to the volumegroup rootvg. All > looked ok when i went to reboot. On the reboot it died in the ramdisk when > it ran vgscan. > "vgscan -- no volume groups found" >=20 > I was then stuck with a none bootable machine. I'll save you the long > story about the trouble i had making some kind of rescue disk, but i > finally got one to work off a cd i had a friend burn for me. >=20 > Now when i run pvscan i get=20 > "pvscan -- inactive PV "/dev/hda3" is associated to an unknown VG (run > vgscan) > pvscan -- total: 14.4GB / in use 1 [14.4GB] / in no VG 0 [0]" >=20 > it doesn't see /dev/hda2 that i added to the vg right before reboot, but > thats not a problem because there was nothing on it yet anyway. >=20 > pvscan -vv gives >=20 > -- Physical volume --- > PV Name /dev/hda3 > VG Name rootvg > PV Size 14.4 GB / NOT usable 3.48 MB [LVM: 135KB] > PV# 1 > PV Status available > Allocatable yes > CurLV 6 > P ESize (KByte) 4096 > Total PE 3685 > Free PE 1261 > Allocated PE 2424 > PV UUID elhLo-Mw5J-8qaE-gN2D-zEYo-Woqh-qH7H5a > System Id eli.custom-edge.com993738446 >=20 >=20 > from what i can tell from the archives to do a vgcfgrestore is the next > logical thing but it doesn't work for me >=20 > vgcfgrestore -n rootvg /dev/hda3 > vgcfgrestore -- "/etc/lvmconf/rootvg.conf" doesn't exist > vgcfgrestore -- a backup for volume group rootvg is not available >=20 > which makes since because i booted off a rescue disk in a ram disk. >=20 > vgscan still gives > vgscan -- no volume groups found >=20 > i did find this answer in the archives for a similar problem: >=20 > > You need to edit the disk signatures and for each PV, insert all the > > _other_ PV signatures in the right place. >=20 > but no explanation on how to do that? >=20 > Is that what i should be doing? If so how do i do that? If not what can i > do to save this box? >=20 > thanks a ton it will save a lot of hassle if i don't have to reinstall. >=20 > eli --=20 AJ Lewis Sistina Software Inc. Voice: 612-638-0500 1313 5th St SE, Suite 111 Fax: 612-638-0500 Minneapolis, MN 55414 E-Mail: lewis@sistina.com http://www.sistina.com Current GPG fingerprint =3D 3B5F 6011 5216 76A5 2F6B 52A0 941E 1261 0029 2= 648 Get my key at: http://www.sistina.com/~lewis/gpgkey (Unfortunately, the PKS-type keyservers do not work with multiple sub-keys) -----Begin Obligatory Humorous Quote---------------------------------------- Hey! It compiles! Ship it! -----End Obligatory Humorous Quote------------------------------------------ --Kj7319i9nmIyA2yE Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.6 (GNU/Linux) Comment: For info see http://www.gnupg.org iD8DBQE7SyggpE6/iGtdjLERAt7NAKCBXZppA7SH7Cei8+hcR3CqZJurhACcCjPf OAcFbqMvOe0Sxotjy47cWCs= =+gZ2 -----END PGP SIGNATURE----- --Kj7319i9nmIyA2yE--