All of lore.kernel.org
 help / color / mirror / Atom feed
From: ppetru@ppetru.net (Petru Paler)
To: linux-kernel@vger.kernel.org
Subject: Megaraid trouble in 2.4.8-pre and 2.4.7-ac
Date: Sat, 4 Aug 2001 15:27:15 -0700	[thread overview]
Message-ID: <20010804152714.C466@ppetru.net> (raw)

Hi,

I get this:

megaraid: v1.17a (Release Date: Fri Jul 13 18:44:01 EDT 2001)
PCI: Found IRQ 5 for device 01:02.0
megaraid: found 0x101e:0x1960:idx 0:bus 1:slot 2:func 0
scsi0 : Found a MegaRAID controller at 0xf8802000, IRQ: 5
scsi0 : Enabling 64 bit support
megaraid: [l148:3.11] detected 1 logical drives
megaraid: channel[1] is raid.
scsi0 : AMI MegaRAID l148 254 commands 16 targs 1 chans 40 luns
scsi0: scanning channel 1 for devices.
scsi0: scanning virtual channel for logical drives.
  Vendor: MegaRAID  Model: LD0 RAID5 35254R  Rev: l148
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 1, id 0, lun 0
Partition check:
 sda:scsi : aborting command due to timeout : pid 0, scsi0, channel 1, id 0, lun 0 Read (10) 00 00 00 00 00 00 00 02 00

when trying to boot 2.4.8-pre4 or 2.4.7-ac5, then the machine hangs.
2.4.7 works fine.

Any ideeas?

Petru

                 reply	other threads:[~2001-08-04 22:28 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20010804152714.C466@ppetru.net \
    --to=ppetru@ppetru.net \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.