From: Bob McElrath <mcelrath+linux@draal.physics.wisc.edu>
To: linux-kernel@vger.kernel.org
Subject: USB UHCI broken again w/ visor
Date: Tue, 28 Aug 2001 01:32:40 -0500 [thread overview]
Message-ID: <20010828013239.N16752@draal.physics.wisc.edu> (raw)
[-- Attachment #1: Type: text/plain, Size: 3890 bytes --]
USB verbose debug is ON, using driver usb-uhci, on an alpha, kernel
2.4.9, new batteries in the thing. This worked with 2.4.7. What
happened? It seems like every other kernel version it gets broken
again, and I can't sync my visor.
Aug 28 01:08:53 draal kernel: usb-uhci.c: $Revision: 1.259 $ time 12:40:16 Aug 25 2001
Aug 28 01:08:53 draal kernel: usb-uhci.c: High bandwidth mode enabled
Aug 28 01:08:53 draal kernel: usb-uhci.c: USB UHCI at I/O 0x8080, IRQ 18
Aug 28 01:08:53 draal kernel: usb-uhci.c: Detected 2 ports
Aug 28 01:08:53 draal kernel: usb.c: new USB bus registered, assigned bus number 1
Aug 28 01:08:53 draal kernel: usb.c: kmalloc IF fffffc000fbef0a0, numif 1
Aug 28 01:08:53 draal kernel: usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
Aug 28 01:08:53 draal kernel: usb.c: USB device number 1 default language ID 0x0
Aug 28 01:08:53 draal kernel: Product: USB UHCI Root Hub
Aug 28 01:08:53 draal kernel: SerialNumber: 8080
Aug 28 01:08:53 draal kernel: hub.c: USB hub found
Aug 28 01:08:53 draal kernel: hub.c: 2 ports detected
Aug 28 01:08:53 draal kernel: hub.c: standalone hub
Aug 28 01:08:53 draal kernel: hub.c: ganged power switching
Aug 28 01:08:53 draal kernel: hub.c: global over-current protection
Aug 28 01:08:53 draal kernel: hub.c: power on to power good time: 2ms
Aug 28 01:08:53 draal kernel: hub.c: hub controller current requirement: 0mA
Aug 28 01:08:53 draal kernel: hub.c: port removable status: RR
Aug 28 01:08:53 draal kernel: hub.c: local power source is good
Aug 28 01:08:53 draal kernel: hub.c: no over-current condition exists
Aug 28 01:08:53 draal kernel: hub.c: enabling power on all ports
Aug 28 01:08:53 draal kernel: usb.c: hub driver claimed interface fffffc000fbef0a0
Aug 28 01:08:53 draal kernel: usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
Aug 28 01:08:53 draal kernel: hub.c: port 1 connection change
Aug 28 01:08:53 draal kernel: hub.c: port 1, portstatus 100, change 3, 12 Mb/s
Aug 28 01:08:53 draal kernel: hub.c: port 2 connection change
Aug 28 01:08:53 draal kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s
Aug 28 01:08:53 draal kernel: hub.c: port 1 enable change, status 100
Aug 28 01:08:53 draal kernel: hub.c: port 2 enable change, status 100
Aug 28 01:09:01 draal kernel: hub.c: port 1 connection change
Aug 28 01:09:01 draal kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
Aug 28 01:09:01 draal kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s
Aug 28 01:09:01 draal kernel: hub.c: USB new device connect on bus1/1, assigned device number 2
Aug 28 01:09:04 draal kernel: usb_control/bulk_msg: timeout
Aug 28 01:09:04 draal kernel: usb.c: USB device not accepting new address=2 (error=-60)
Aug 28 01:09:04 draal kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s
Aug 28 01:09:04 draal kernel: hub.c: USB new device connect on bus1/1, assigned device number 3
Aug 28 01:09:07 draal kernel: usb_control/bulk_msg: timeout
Aug 28 01:09:07 draal kernel: usb.c: USB device not accepting new address=3 (error=-60)
Aug 28 01:09:34 draal kernel: hub.c: port 1 connection change
Aug 28 01:09:34 draal kernel: hub.c: port 1, portstatus 100, change 3, 12 Mb/s
Aug 28 01:09:34 draal kernel: hub.c: port 1 enable change, status 100
Aug 28 01:15:22 draal kernel: hub.c: port 1 connection change
Aug 28 01:15:22 draal kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s
Aug 28 01:15:22 draal kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s
Aug 28 01:15:22 draal kernel: hub.c: USB new device connect on bus1/1, assigned device number 4
Aug 28 01:15:25 draal kernel: usb_control/bulk_msg: timeout
Please cc me as I am not on this list.
Cheers,
-- Bob
Bob McElrath (rsmcelrath@students.wisc.edu)
Univ. of Wisconsin at Madison, Department of Physics
[-- Attachment #2: Type: application/pgp-signature, Size: 240 bytes --]
next reply other threads:[~2001-08-28 6:33 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-08-28 6:32 Bob McElrath [this message]
2001-08-28 15:35 ` USB UHCI broken again w/ visor Greg KH
2001-08-28 15:53 ` Bob McElrath
2001-08-28 16:01 ` Greg KH
2001-08-28 16:08 ` Bob McElrath
2001-08-28 16:18 ` Greg KH
2001-08-28 16:36 ` Bob McElrath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010828013239.N16752@draal.physics.wisc.edu \
--to=mcelrath+linux@draal.physics.wisc.edu \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.