From: thunder7@xs4all.nl
To: parisc-linux@lists.parisc-linux.org
Subject: [parisc-linux] 2.4.9-pa10 hangs on c200+ after 'branching to kernel entry point'
Date: Thu, 30 Aug 2001 21:57:14 +0200 [thread overview]
Message-ID: <20010830215714.A19233@middle.of.nowhere> (raw)
did I configure somethings wrong? I grabbed linux-latest yesterday,
and did a
make oldconfig
make config
I did change the CPU-type to PA8x00, and set CONFIG_PA20 to y.
That should still work, right?
I have the feeling I'm asking a lot of questions.
Jurriaan
2/boot/vmlinux-2.4.9-pa10 root=/dev/sda2 HOME=/ console=ttyS0 TERM=vt102
0: 2/boot/vmlinux-2.4.9-pa10
1: root=/dev/sda2
2: HOME=/
3: console=ttyS0
4: TERM=vt102
Edit which field?
(or 'b' to boot with this command line)? b
Command line: 'root=/dev/sda2 HOME=/ console=ttyS0 TERM=vt102'
Kernel: partition 2 file /boot/vmlinux-2.4.9-pa10
ext2 block size 4096
ext2_mount(partition 2) returns 0
ext2_open(/boot/vmlinux-2.4.9-pa10) = 3
ELF32 executable
Entry 00100028 first 00100000 n 4
Segment 0 load 00100000 size 1720172 mediaptr 0x1000
Segment 1 load 002a4000 size 282416 mediaptr 0x1a5000
Segment 2 load 002ec000 size 385024 mediaptr 0x1ea000
Segment 3 load 0037f530 size 87984 mediaptr 0x248530
branching to kernel entry point 0x00100028
=============================
jurriaan@pa8200:~/source/linux$ ls -l /boot
total 7020
-rw-r--r-- 1 root root 593072 Jan 16 2021 System.map-2.4.0
-rw-r--r-- 1 root disk 552272 Aug 30 23:21 System.map-2.4.9-pa10
-rw-r--r-- 1 root root 3949 Jan 16 2021 config-2.4.0
-rw-r--r-- 1 root disk 13616 Aug 30 23:21 config-2.4.9-pa10
-rw-r--r-- 1 root root 26624 Jul 11 19:08 iplboot
-rw-r--r-- 1 root root 2853588 Jan 16 2021 vmlinux-2.4.0
-rwxr-xr-x 1 root disk 3118114 Aug 30 23:20 vmlinux-2.4.9-pa10
jurriaan@pa8200:~/source/linux$ cat /etc/palo.conf
--bootloader=/boot/iplboot
--commandline=2/boot/vmlinux-2.4.9-pa10 root=/dev/sda2 HOME=/
--recoverykernel=/boot/vmlinux-2.4.0
--init-partitioned=/dev/sda
jurriaan@pa8200:~/source/linux$ egrep "m$|y$" .config
CONFIG_PARISC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_EXPERIMENTAL=y
CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_GSC=y
CONFIG_IOMMU_CCIO=y
CONFIG_GSC_LASI=y
CONFIG_GSC_WAX=y
CONFIG_PCI=y
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_WAX_EISA=y
CONFIG_SUPERIO=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
CONFIG_PCI_NAMES=y
CONFIG_CHASSIS_LCD_LED=y
CONFIG_HOTPLUG=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_SOM=y
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
CONFIG_PARPORT_GSC=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_LASI=y
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_SYM53C8XX=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_LASI_82596=y
CONFIG_NET_PCI=y
CONFIG_TULIP=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_GSC_PS2=y
CONFIG_HIL=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_SERIAL_GSC=y
CONFIG_UNIX98_PTYS=y
CONFIG_PRINTER=y
CONFIG_MOUSE=y
CONFIG_PSMOUSE=y
CONFIG_GENRTC=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_FB=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FB_STI=y
CONFIG_FBCON_CFB2=y
CONFIG_FBCON_CFB4=y
CONFIG_FBCON_CFB8=y
CONFIG_FBCON_STI=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_STI_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FBCON=y
CONFIG_FBCON_FONT=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_FONT_6x11=y
CONFIG_FONT_SUN12x22=y
CONFIG_SOUND=y
CONFIG_SOUND_HARMONY=y
CONFIG_MAGIC_SYSRQ=y
--
BOFH excuse #210:
We didn't pay the Internet bill and it's been cut off.
GNU/Linux 2.4.9-ac2 SMP/ReiserFS 2x1402 bogomips load av: 0.13 0.07 0.02
next reply other threads:[~2001-08-30 19:57 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-08-30 19:57 thunder7 [this message]
2001-08-30 20:09 ` [parisc-linux] 2.4.9-pa10 hangs on c200+ after 'branching to kernel entry point' Matthew Wilcox
2001-08-31 4:57 ` thunder7
2001-08-31 5:47 ` Matthew Wilcox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010830215714.A19233@middle.of.nowhere \
--to=thunder7@xs4all.nl \
--cc=parisc-linux@lists.parisc-linux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.