From: Richard Hirst <rhirst@linuxcare.com>
To: Boyan Lazarov <bsl@mek.dtu.dk>
Cc: parisc-linux <parisc-linux@lists.parisc-linux.org>
Subject: Re: [parisc-linux] Installing on Apollo 735
Date: Mon, 10 Sep 2001 13:41:34 +0100 [thread overview]
Message-ID: <20010910134134.V19441@linuxcare.com> (raw)
In-Reply-To: <3B9CAC65.E1096C44@mek.dtu.dk>; from bsl@mek.dtu.dk on Mon, Sep 10, 2001 at 02:04:53PM +0200
On Mon, Sep 10, 2001 at 02:04:53PM +0200, Boyan Lazarov wrote:
> The system just stop
> The boot parameters are :
> 0: 0/vmlinux
> 1: root=/dev/ram
> 2: initrd=0/ramdisk
> 3: console=ttyS0
> 4: TERM=vt102
> 5: sim700=noneg:0xff,nodisc:0xff
> 6: isl
>
> And the output is:
> SCSI subsystem driver Revision: 1.00
> sim700: Configuring 53c700 (SCSI-ID 7) at f0825100, IRQ 86, options 1
> scsi0: Revision 0x0
> scsi0: test 1 completed ok.
> scsi0 : LASI/Simple 53c7xx
> Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.02
> Type: CD-ROM ANSI SCSI revision: 02
> scsi0: Unable to abort command for target 5
> scsi0: Unable to send Bus Device Reset for target 5
> scsi0: Unable to do SCSI bus reset
> scsi0: >>>>>>>>>>>> Host reset <<<<<<<<<<<<
> scsi0: istat = 0c, sstat0 = 00, sstat1 = 00, dstat = 00
> scsi0: dsp = 07875060 (script[0x1418]), dsps = 078751f0, target = 0
> scsi0: Failing command for ID5
> Vendor: SEAGATE Model: ST31200N Rev: 8714
> Type: Direct-Access ANSI SCSI revision: 02
> Detected scsi disk sda at scsi0, channel 0, id 6, lun 0
>
> After this the system just stops
That's not good. Can you try with just sim700=nodisc:0xff
please.
Richard
next prev parent reply other threads:[~2001-09-10 12:41 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-09 17:14 [parisc-linux] Installing on Apollo 735 Boyan Lazarov
2001-09-10 7:32 ` Richard Hirst
2001-09-10 8:03 ` Boyan Lazarov
2001-09-10 9:36 ` Richard Hirst
2001-09-10 12:04 ` Boyan Lazarov
2001-09-10 12:41 ` Richard Hirst [this message]
2001-09-10 12:55 ` Boyan Lazarov
2001-09-10 13:19 ` Richard Hirst
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010910134134.V19441@linuxcare.com \
--to=rhirst@linuxcare.com \
--cc=bsl@mek.dtu.dk \
--cc=parisc-linux@lists.parisc-linux.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.