From: Richard Hirst <rhirst@linuxcare.com>
To: Richard Allen <ra@hp.is>
Cc: parisc-linux@lists.parisc-linux.org
Subject: Re: [parisc-linux] C360 install fails
Date: Fri, 21 Sep 2001 21:38:01 +0100 [thread overview]
Message-ID: <20010921213801.K24917@linuxcare.com> (raw)
In-Reply-To: <20010921135335.E11577@hp.is>; from ra@hp.is on Fri, Sep 21, 2001 at 01:53:35PM +0000
On Fri, Sep 21, 2001 at 01:53:35PM +0000, Richard Allen wrote:
> Im using the 0.9.2 CD. I have a C360 (512Meg RAM, 9 Gig hard drive) and
> I removed the Graphics card from it and hooked it to a serial console.
>
> The machine boots just fine into the installer. I created that f0 partition,
> a small /boot, a swap partition and the remaining disk as /
>
> After that it makes me select a distro (I select sid as the documentation says)
> then this hits:
>
> +ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ+ Please Wait +ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ+
> | |
> | Installing Drivers from |
> | /instmnt/debian/dists/sid/main/disks-hppa/current/64/drive |
> | rs.tgz... |
One thing that's wrong there, you need to install the 32 bit kernel and
modules for a C360. I don't imagine that is the cause of your problem
though. Although a C360 will run 64 bit, that isn't completely supported
under linux yet.
>
> ioctl: LOOP_CLR_FD: No such device or address
> YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI
> PSW: 00000000000001001111111100001100
> r0-3 00000000 101fc000 101a5134 2fe06b60
> r4-7 00000000 00000000 10337010 10318684m Installation
> r8-11 10318010 10318010 1030c010 1030c468
> r12-15 10337010 ffffffff 000000fd f0100000
> r16-19 10300580 f0000154 f000014c 0000000e
> r20-23 0000001f 000003e7 101a5c14 00000000
> r24-27 00000000 00000005 ffd05805 1028a010
> r28-31 10335810 00000592 10300a80 101213f8
> sr0-3 00000000 00000065 00000000 00000000
> sr4-7 00000000 00000000 00000000 00000000
>
> IASQ: 00000000 00000000 IAOQ: 101fc2bc 101fc2c0
> IIR: 0f40001c ISR: a607ffff IOR: 41505805
> ORIG_R28: 00000000
101fc2b8 T _gsc_readb
101fc2cc T _gsc_readw
101a5118 t serial_in
101a5134 t .L687
101a5160 t .L693
101a5160 t serial_out
So it looks like serial_in() called _gsc_readb(0xffd05805).
On booting, my C360 says
1. Raven U/L2 Dino RS-232 (10) at 0xf2003000, versions 0x6, 0x0, 0x8c, 0x0, 0x0
3. Raven+ w SE FWSCSI Core RS-232 (10) at 0xffd05000, versions 0x56, 0x0, 0x8c, 0x0, 0x0
...
ttyS00 at iomem 0xffd05800 (irq = 154) is a 16550A
...
So 0xffd05805 looks like a reasonable address for it to try and access.
Does it crash at the same place if you try again?
Richard
next prev parent reply other threads:[~2001-09-21 20:39 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-09-21 13:53 [parisc-linux] C360 install fails Richard Allen
2001-09-21 20:38 ` Richard Hirst [this message]
2001-09-21 21:16 ` Richard Hirst
2001-09-22 16:30 ` Richard Allen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20010921213801.K24917@linuxcare.com \
--to=rhirst@linuxcare.com \
--cc=parisc-linux@lists.parisc-linux.org \
--cc=ra@hp.is \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.