From: Mark Charlebois <mcharleb@qualcomm.com>
To: Kapil Konde <kapilkk@yahoo.com>
Cc: Linuxppc-Embedded <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: Loading kernel on ppcboot
Date: Thu, 4 Oct 2001 08:34:03 -0700 [thread overview]
Message-ID: <20011004083403.A21516@qualcomm.com> (raw)
In-Reply-To: <GDEHIPAFEMJDKNFDCIEBMEJACCAA.kapilkk@yahoo.com>; from kapilkk@yahoo.com on Thu, Oct 04, 2001 at 05:35:17PM +0530
Have you copied the bd_t structure from ppcboot to linux? I had a
similar problem before I did this.
See the message from David Chiu on the linuxppc-embedded list from Wed,
April 11, 2001.
http://lists.linuxppc.org/linuxppc-embedded/200104/msg00084.html
Regards,
Mark
On Thu, 04 Oct 2001, Kapil Konde wrote:
>
> Hi all,
> I am trying to load kernel using ppcboot. After I load kernel using tftp
> and give bootm command I get following response.
>
> ....
> ....
> Data Size: 574121 Bytes = 560 kB = 0 MB
> Load Address: 00000000
> Entry Point: 00000000
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... OK
> ## Current stack ends at 0x00FBF7F0 => set upper limit to 0x00800000
> ## cmdline at 0x007FFF00 ... 0x007FFF00
> No initrd
> ## Transferring control to Linux (at address 00000000) ...
>
>
> And nothing happens after this. Can somebody please explain.
>
>
> Thanks and regards,
> Kapilk.
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
prev parent reply other threads:[~2001-10-04 15:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-04 12:05 Loading kernel on ppcboot Kapil Konde
2001-10-04 15:34 ` Mark Charlebois [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011004083403.A21516@qualcomm.com \
--to=mcharleb@qualcomm.com \
--cc=kapilkk@yahoo.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.