From: Cliff Albert <cliff@oisec.net>
To: linux-kernel@vger.kernel.org
Cc: coldsync-bugs@ooblick.com
Subject: [OOPS] USB, Palm M500, Coldsync
Date: Tue, 23 Oct 2001 19:14:58 +0200 [thread overview]
Message-ID: <20011023191458.A4261@oisec.net> (raw)
Hi,
Coldsync segfaults after a successful hotsync with my Palm M500 which is connected using the USB Cradle. It also generates a oops. I hope the following info is enough to fix this problem.
Distribution: Debian(sid) w/ Coldsync (coldsync-2.2.2-20011012.tar.gz)
]------------------------[uname -ar]-----------------------------------------[
Linux version 2.4.12-ac5 (root@joanne) (gcc version 2.95.4 20011006 (Debian prer
elease)) #8 Mon Oct 22 09:27:00 CEST 2001
]------------------------[OOPS]----------------------------------------------[
ksymoops 2.4.3 on i586 2.4.12-ac5. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.12-ac5/ (default)
-m /boot/System.map-2.4.12-ac5 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_system_map stat /boot/System.map-2.4.12-ac5 failed
c01f0ae0
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c01f0ae0>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00210286
eax: 0000001f ebx: c9c70894 ecx: c6de7000 edx: ffffffff
esi: c6de7380 edi: c9c70800 ebp: c9c708f0 esp: c3b3ded0
ds: 0018 es: 0018 ss: 0018
Process coldsync (pid: 3533, stackpage=c3b3d000)
Stack: c01fc376 ffffffff c9c70894 c9c70800 c6f87c60 00000000 c01fa900 c9c70894
c6f87c60 c2564000 c23a4ac0 c13162a0 c0191e60 c2564000 c6f87c60 c6f87c60
c23a4ac0 c13162a0 c6f19aa0 00000001 c3b3c000 0a19576e 00000000 00200286
Call Trace: [<c01fc376>] [<c01fa900>] [<c0191e60>] [<c01957f0>] [<c0192481>]
[<c012f0a0>] [<c012e23b>] [<c012e287>] [<c0106b23>]
Code: 8b 42 14 85 c0 74 19 8b 80 bc 00 00 00 8b 40 18 52 8b 40 10
>>EIP; c01f0ae0 <usb_unlink_urb+8/270> <=====
Trace; c01fc376 <usb_serial_deregister+2b2/efc>
Trace; c01fa900 <usb_reset_device+6aa0/822c>
Trace; c0191e60 <tty_hung_up_p+bc0/1ca8>
Trace; c01957f0 <tty_unregister_driver+2464/2594>
Trace; c0192480 <tty_hung_up_p+11e0/1ca8>
Trace; c012f0a0 <fput+38/c0>
Trace; c012e23a <filp_close+5a/64>
Trace; c012e286 <sys_close+42/84>
Trace; c0106b22 <__up_wakeup+105e/2644>
Code; c01f0ae0 <usb_unlink_urb+8/270>
00000000 <_EIP>:
Code; c01f0ae0 <usb_unlink_urb+8/270> <=====
0: 8b 42 14 mov 0x14(%edx),%eax <=====
Code; c01f0ae2 <usb_unlink_urb+a/270>
3: 85 c0 test %eax,%eax
Code; c01f0ae4 <usb_unlink_urb+c/270>
5: 74 19 je 20 <_EIP+0x20> c01f0b00 <usb_unlink_urb+28/270>
Code; c01f0ae6 <usb_unlink_urb+e/270>
7: 8b 80 bc 00 00 00 mov 0xbc(%eax),%eax
Code; c01f0aec <usb_unlink_urb+14/270>
d: 8b 40 18 mov 0x18(%eax),%eax
Code; c01f0af0 <usb_unlink_urb+18/270>
10: 52 push %edx
Code; c01f0af0 <usb_unlink_urb+18/270>
11: 8b 40 10 mov 0x10(%eax),%eax
1 warning and 1 error issued. Results may not be reliable.
]--------------------------[ColdSync Version]-----------------------[
coldsync version 2.2.2.
ColdSync homepage at http://www.ooblick.com/software/coldsync/
Compile-type options:
HAVE_STRCASECMP, HAVE_STRNCASECMP: strings are compared without regard
to case, whenever possible.
Default global configuration file: /usr/local/etc/coldsync.conf
]--------------------------[USB dmesg]------------------------------[
usb-uhci.c: $Revision: 1.268 $ time 09:31:06 Oct 22 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 10 for device 00:07.2
usb-uhci.c: USB UHCI at I/O 0x3000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.268:USB Universal Host Controller Interface driver
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
usb.c: registered new driver serial
usbserial.c: USB Serial Driver core v1.4
usbserial.c: USB Serial support registered for Handspring Visor
usbserial.c: USB Serial support registered for Palm M500
usbserial.c: USB Serial support registered for Palm M505
usbserial.c: USB Serial support registered for Sony Clie 3.5
usbserial.c: USB Serial support registered for Sony Clie 4.0
visor.c: USB HandSpring Visor, Palm m50x, Sony Clie driver v1.4
]--------------------------[/proc/pci]------------------------------[
Bus 0, device 7, function 2:
USB Controller: VIA Technologies, Inc. UHCI USB (rev 16).
IRQ 10.
Master Capable. Latency=128.
I/O at 0x3000 [0x301f].
--
Cliff Albert | RIPE: CA3348-RIPE | www.oisec.net
cliff@oisec.net | 6BONE: CA2-6BONE | icq 18461740
next reply other threads:[~2001-10-23 17:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-10-23 17:14 Cliff Albert [this message]
2001-10-23 17:37 ` [OOPS] USB, Palm M500, Coldsync Greg KH
2001-10-23 17:45 ` Cliff Albert
2001-10-23 22:37 ` Marius Gedminas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011023191458.A4261@oisec.net \
--to=cliff@oisec.net \
--cc=coldsync-bugs@ooblick.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.