From: Pierre Lombard <pierre.lombard@imag.fr>
To: linux-kernel@vger.kernel.org
Subject: [PATCH] small doc update for /proc/sys/net/ipv4/icmp_rate{mask,limit}
Date: Wed, 12 Dec 2001 13:27:22 +0100 [thread overview]
Message-ID: <20011212122722.GA21997@sci41.imag.fr> (raw)
[-- Attachment #1: Type: text/plain, Size: 196 bytes --]
Hi,
Comments in the C code are incorrect and the documentation is
outdated.
Attached patch is for 2.4.17-pre8 but probably applies cleanly
against 2.5.x too.
--
Best regards,
Pierre Lombard
[-- Attachment #2: 20011212-icmpmask.diff --]
[-- Type: text/plain, Size: 1737 bytes --]
--- linux-2.4.17-pre8~/Documentation/networking/ip-sysctl.txt Wed Dec 12 12:52:25 2001
+++ linux-2.4.17-pre8/Documentation/networking/ip-sysctl.txt Wed Dec 12 12:53:17 2001
@@ -309,13 +309,20 @@
ICMP ECHO requests sent to it or just those to broadcast/multicast
addresses, respectively.
-icmp_destunreach_rate - INTEGER
-icmp_paramprob_rate - INTEGER
-icmp_timeexceed_rate - INTEGER
-icmp_echoreply_rate - INTEGER (not enabled per default)
- Limit the maximal rates for sending ICMP packets to specific targets.
+icmp_ratelimit - INTEGER
+ Limit the maximal rates for sending ICMP packets whose type matches
+ icmp_ratemask (see below) to specific targets.
0 to disable any limiting, otherwise the maximal rate in jiffies(1)
- See the source for more information.
+ Default: 1
+
+icmp_ratemask - INTEGER
+ Mask made of ICMP types for which rates are being limited.
+ Default: 6168
+ Note: 6168 = 0x1818 = 1<<ICMP_DEST_UNREACH + 1<<ICMP_SOURCE_QUENCH +
+ 1<<ICMP_TIME_EXCEEDED + 1<<ICMP_PARAMETERPROB, which means
+ dest unreachable (3), source quench (4), time exceeded (11)
+ and parameter problem (12) ICMP packets are rate limited
+ (check values in icmp.h)
icmp_ignore_bogus_error_responses - BOOLEAN
Some routers violate RFC 1122 by sending bogus responses to broadcast
--- linux-2.4.17-pre8~/net/ipv4/icmp.c Wed Dec 12 12:48:56 2001
+++ linux-2.4.17-pre8/net/ipv4/icmp.c Wed Dec 12 12:51:41 2001
@@ -154,8 +154,8 @@
* it's bit position.
*
* default:
- * dest unreachable (0x03), source quench (0x04),
- * time exceeded (0x11), parameter problem (0x12)
+ * dest unreachable (3), source quench (4),
+ * time exceeded (11), parameter problem (12)
*/
int sysctl_icmp_ratelimit = 1*HZ;
next reply other threads:[~2001-12-12 12:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-12 12:27 Pierre Lombard [this message]
2001-12-13 0:37 ` [PATCH] small doc update for /proc/sys/net/ipv4/icmp_rate{mask,limit} David S. Miller
2001-12-13 8:57 ` Pierre Lombard
2001-12-13 8:59 ` David S. Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011212122722.GA21997@sci41.imag.fr \
--to=pierre.lombard@imag.fr \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.