From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Bader Subject: Re: [linux-lvm] Does LVM compile on Sparc64? Message-ID: <20011214224027.A122@trash.net> References: <20011214185558.A11845@trash.net> <20011214191520.GA19114@tykepenguin.com> Mime-Version: 1.0 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable In-Reply-To: <20011214191520.GA19114@tykepenguin.com> Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Date: Fri Dec 14 15:38:01 2001 List-Id: Content-Type: text/plain; charset="iso-8859-1" To: linux-lvm@sistina.com Hi In alphanet.ml.linux.lvm, you wrote: > See http://lists.sistina.com/pipermail/linux-lvm/2001-December/009950.ht= ml > =20 > for a patch that should work. Oh nice. I didn't found this patch yet (searched with google). I applied it and it compiled without error. But now, my machine does not boot anymore - it hangs directly after it has detected my raid arrays: -->-->-->-- md: updating md0 RAID superblock on device sdb1 [events: 00000022](write) sdb1's sb offset: 3145664 md: serializing resync, md0 has overlapping physical units with md2! sda1 [events: 00000022](write) sda1's sb offset: 3145664 =2E =2E.. autorun DONE. --<--<--<-- After this, it won't continue booting up. I booted a backup copy of my kernel image. I saw, that after the above step ("... autorun DONE.") the kernel tries to mount my root partition read-only. My / is on a RAID1 array (/dev/md0) with ext2. Does the LVM code touch anything of these two? Any other hints? Thanks & Cheers Thomas --=20 .-. Thomas Bader =B7 thomasb@trash.net.remove =B7 http://www.t-bader.ch= / .-. oo| o= o| /`'\ Einen Unix-Shellaccount gibt es unter http://www.trash.net/ /`= '\ (\_;/) PGP Key-ID: 0x3A4B7F5D (RSA) 0x7584F5D8 (DSA/EG) (\_= ;/)