All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jens Axboe <axboe@suse.de>
To: rwhron@earthlink.net
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.5.2-pre1 dbench 32 hangs in vmstat "b" state
Date: Mon, 24 Dec 2001 15:03:37 +0100	[thread overview]
Message-ID: <20011224150337.A593@suse.de> (raw)
In-Reply-To: <20011221091104.A120@earthlink.net> <20011221154654.E811@suse.de> <20011221185538.A131@earthlink.net>
In-Reply-To: <20011221185538.A131@earthlink.net>

[-- Attachment #1: Type: text/plain, Size: 574 bytes --]

On Fri, Dec 21 2001, rwhron@earthlink.net wrote:
> > Ok, please try something for me. In drivers/block/elevator.c, comment
> > out this block:
> 
> After commenting the block of code, make clean, etc, I rebooted and ran 
> the dbench 32, 128 scripty.  It completed dbench 32 again, but dbench
> 128 hung again.  I could quit some tools.  df, ps, wouldn't return
> and didn't listen to <ctrl c>.

What IDE controller are you using? The two other reports so far have
been with VIA, maybe that's a clue.

Anyways, could you please reproduce with this applied?

-- 
Jens Axboe


[-- Attachment #2: bio-252p1-2 --]
[-- Type: text/plain, Size: 6933 bytes --]

diff -ur -X exclude /opt/kernel/linux-2.5.2-pre1/drivers/block/elevator.c linux/drivers/block/elevator.c
--- /opt/kernel/linux-2.5.2-pre1/drivers/block/elevator.c	Sun Dec 23 17:11:54 2001
+++ linux/drivers/block/elevator.c	Sun Dec 23 15:53:07 2001
@@ -124,21 +124,21 @@
 inline int elv_try_merge(struct request *__rq, struct bio *bio)
 {
 	unsigned int count = bio_sectors(bio);
-
-	if (!elv_rq_merge_ok(__rq, bio))
-		return ELEVATOR_NO_MERGE;
+	int ret = ELEVATOR_NO_MERGE;
 
 	/*
 	 * we can merge and sequence is ok, check if it's possible
 	 */
-	if (__rq->sector + __rq->nr_sectors == bio->bi_sector) {
-		return ELEVATOR_BACK_MERGE;
-	} else if (__rq->sector - count == bio->bi_sector) {
-		__rq->elevator_sequence -= count;
-		return ELEVATOR_FRONT_MERGE;
+	if (elv_rq_merge_ok(__rq, bio)) {
+		if (__rq->sector + __rq->nr_sectors == bio->bi_sector) {
+			ret = ELEVATOR_BACK_MERGE;
+		} else if (__rq->sector - count == bio->bi_sector) {
+			__rq->elevator_sequence -= count;
+			ret = ELEVATOR_FRONT_MERGE;
+		}
 	}
 
-	return ELEVATOR_NO_MERGE;
+	return ret;
 }
 
 int elevator_linus_merge(request_queue_t *q, struct request **req,
@@ -172,15 +172,17 @@
 		 */
 		if (__rq->elevator_sequence-- <= 0)
 			break;
+
 		if (__rq->flags & (REQ_BARRIER | REQ_STARTED))
 			break;
 		if (!(__rq->flags & REQ_CMD))
 			continue;
-		if (__rq->elevator_sequence < 0)
-			break;
 
 		if (!*req && bio_rq_in_between(bio, __rq, &q->queue_head))
 			*req = __rq;
+
+		if (__rq->elevator_sequence < bio_sectors(bio))
+			break;
 
 		if ((ret = elv_try_merge(__rq, bio))) {
 			*req = __rq;
diff -ur -X exclude /opt/kernel/linux-2.5.2-pre1/drivers/block/ll_rw_blk.c linux/drivers/block/ll_rw_blk.c
--- /opt/kernel/linux-2.5.2-pre1/drivers/block/ll_rw_blk.c	Sun Dec 23 17:11:54 2001
+++ linux/drivers/block/ll_rw_blk.c	Mon Dec 24 14:50:46 2001
@@ -155,6 +155,11 @@
 	blk_queue_max_sectors(q, MAX_SECTORS);
 	blk_queue_hardsect_size(q, 512);
 
+	/*
+	 * by default assume old behaviour and bounce for any highmem page
+	 */
+	blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
+
 	init_waitqueue_head(&q->queue_wait);
 }
 
@@ -603,9 +608,6 @@
 		return 0;
 
 	/* Merge is OK... */
-	if (q->last_merge == &next->queuelist)
-		q->last_merge = NULL;
-
 	req->nr_phys_segments = total_phys_segments;
 	req->nr_hw_segments = total_hw_segments;
 	return 1;
@@ -812,12 +814,8 @@
 	q->plug_tq.data		= q;
 	q->queue_flags		= (1 << QUEUE_FLAG_CLUSTER);
 	q->queue_lock		= lock;
+	q->last_merge		= NULL;
 	
-	/*
-	 * by default assume old behaviour and bounce for any highmem page
-	 */
-	blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
-
 	blk_queue_segment_boundary(q, 0xffffffff);
 
 	blk_queue_make_request(q, __make_request);
@@ -886,6 +884,12 @@
 	if (!rq && (gfp_mask & __GFP_WAIT))
 		rq = get_request_wait(q, rw);
 
+	if (rq) {
+		rq->flags = 0;
+		rq->buffer = NULL;
+		rq->bio = rq->biotail = NULL;
+		rq->waiting = NULL;
+	}
 	return rq;
 }
 
@@ -953,10 +977,15 @@
 	/*
 	 * debug stuff...
 	 */
-	if (insert_here == &q->queue_head) {
-		struct request *__rq = __elv_next_request(q);
+	if (insert_here->next != &q->queue_head) {
+		struct request *__rq = list_entry_rq(insert_here->next);
 
+#if 0
 		BUG_ON(__rq && (__rq->flags & REQ_STARTED));
+#else
+		if (__rq->flags & REQ_STARTED)
+			printk("add_request: irk, next is started\n");
+#endif
 	}
 
 	/*
@@ -972,11 +1001,15 @@
 void blkdev_release_request(struct request *req)
 {
 	struct request_list *rl = req->rl;
+	request_queue_t *q = req->q;
 
 	req->rq_status = RQ_INACTIVE;
 	req->q = NULL;
 	req->rl = NULL;
 
+	if (q && q->last_merge == &req->queuelist)
+		q->last_merge = NULL;
+
 	/*
 	 * Request may not have originated from ll_rw_blk. if not,
 	 * it didn't come out of our reserved rq pools
@@ -1571,21 +1604,23 @@
 
 inline void blk_recalc_rq_sectors(struct request *rq, int nsect)
 {
-	rq->hard_sector += nsect;
-	rq->hard_nr_sectors -= nsect;
-	rq->sector = rq->hard_sector;
-	rq->nr_sectors = rq->hard_nr_sectors;
+	if (rq->flags & REQ_CMD) {
+		rq->hard_sector += nsect;
+		rq->hard_nr_sectors -= nsect;
+		rq->sector = rq->hard_sector;
+		rq->nr_sectors = rq->hard_nr_sectors;
 
-	rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9;
-	rq->hard_cur_sectors = rq->current_nr_sectors;
+		rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9;
+		rq->hard_cur_sectors = rq->current_nr_sectors;
 
-	/*
-	 * if total number of sectors is less than the first segment
-	 * size, something has gone terribly wrong
-	 */
-	if (rq->nr_sectors < rq->current_nr_sectors) {
-		printk("blk: request botched\n");
-		rq->nr_sectors = rq->current_nr_sectors;
+		/*
+		 * if total number of sectors is less than the first segment
+		 * size, something has gone terribly wrong
+		 */
+		if (rq->nr_sectors < rq->current_nr_sectors) {
+			printk("blk: request botched\n");
+			rq->nr_sectors = rq->current_nr_sectors;
+		}
 	}
 }
 
diff -ur -X exclude /opt/kernel/linux-2.5.2-pre1/include/linux/blkdev.h linux/include/linux/blkdev.h
--- /opt/kernel/linux-2.5.2-pre1/include/linux/blkdev.h	Sun Dec 23 17:11:55 2001
+++ linux/include/linux/blkdev.h	Sun Dec 23 17:15:02 2001
@@ -196,8 +196,7 @@
 #define RQ_SCSI_DISCONNECTING	0xffe0
 
 #define QUEUE_FLAG_PLUGGED	0	/* queue is plugged */
-#define QUEUE_FLAG_NOSPLIT	1	/* can process bio over several goes */
-#define QUEUE_FLAG_CLUSTER	2	/* cluster several segments into 1 */
+#define QUEUE_FLAG_CLUSTER	1	/* cluster several segments into 1 */
 
 #define blk_queue_plugged(q)	test_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags)
 #define blk_mark_plugged(q)	set_bit(QUEUE_FLAG_PLUGGED, &(q)->queue_flags)
diff -ur -X exclude /opt/kernel/linux-2.5.2-pre1/mm/highmem.c linux/mm/highmem.c
--- /opt/kernel/linux-2.5.2-pre1/mm/highmem.c	Sun Dec 23 17:11:56 2001
+++ linux/mm/highmem.c	Mon Dec 24 13:59:21 2001
@@ -25,7 +25,9 @@
 
 static void *page_pool_alloc(int gfp_mask, void *data)
 {
-	return alloc_page(gfp_mask);
+	int gfp = gfp_mask | (int) data;
+
+	return alloc_page(gfp);
 }
 
 static void page_pool_free(void *page, void *data)
@@ -252,7 +254,7 @@
 	if (isa_page_pool)
 		return 0;
 
-	isa_page_pool = mempool_create(ISA_POOL_SIZE, page_pool_alloc, page_pool_free, NULL);
+	isa_page_pool = mempool_create(ISA_POOL_SIZE, page_pool_alloc, page_pool_free, (void *) __GFP_DMA);
 	if (!isa_page_pool)
 		BUG();
 
@@ -272,7 +274,7 @@
 	int i;
 
 	__bio_for_each_segment(tovec, to, i, 0) {
-		fromvec = &from->bi_io_vec[i];
+		fromvec = from->bi_io_vec + i;
 
 		/*
 		 * not bounced
@@ -301,7 +303,7 @@
 	 * free up bounce indirect pages used
 	 */
 	__bio_for_each_segment(bvec, bio, i, 0) {
-		org_vec = &bio_orig->bi_io_vec[i];
+		org_vec = bio_orig->bi_io_vec + i;
 		if (bvec->bv_page == org_vec->bv_page)
 			continue;
 
@@ -394,7 +397,7 @@
 		if (!bio)
 			bio = bio_alloc(bio_gfp, (*bio_orig)->bi_vcnt);
 
-		to = &bio->bi_io_vec[i];
+		to = bio->bi_io_vec + i;
 
 		to->bv_page = mempool_alloc(pool, gfp);
 		to->bv_len = from->bv_len;

  reply	other threads:[~2001-12-24 14:04 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2001-12-21 14:11 2.5.2-pre1 dbench 32 hangs in vmstat "b" state rwhron
2001-12-21 14:46 ` Jens Axboe
2001-12-21 16:43   ` rwhron
2001-12-21 17:01     ` Jens Axboe
2001-12-21 18:47       ` rwhron
2001-12-21 22:19         ` Jens Axboe
2001-12-21 23:55   ` rwhron
2001-12-24 14:03     ` Jens Axboe [this message]
2001-12-24 16:59       ` rwhron
2001-12-24 17:02         ` Jens Axboe
2001-12-24 22:14           ` rwhron
2001-12-27 19:07           ` rwhron
2001-12-28 11:40             ` Jens Axboe
2001-12-28 14:14               ` rwhron
2001-12-28 14:30                 ` Jens Axboe
2001-12-28 17:49                   ` rwhron
2001-12-28 19:29                   ` rwhron
2001-12-29  6:42                   ` rwhron
2001-12-29 17:33                     ` Jens Axboe
2001-12-29 17:48                       ` Jens Axboe
2001-12-29 19:43                         ` rwhron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20011224150337.A593@suse.de \
    --to=axboe@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rwhron@earthlink.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.