From: Guillaume Morin <guillaume@morinfr.org>
To: linux-kernel@vger.kernel.org
Subject: Re: severe slowdown with 2.4 series w/heavy disk access
Date: Wed, 26 Dec 2001 20:25:35 +0100 [thread overview]
Message-ID: <20011226192535.GA11896@morinfr.org> (raw)
FYI,
I experience the same problem with recent kernels. I run 2.4.16. When I
copy a file from one hd to another, ls'ing a empty directory takes about
6-7 secs.
Disks are
/dev/hda:
non-removable ATA device, with non-removable media
Model Number: QUANTUM FIREBALLP LM15
Serial Number: 883011568812
Firmware Revision: A35.0700
Standards:
Used: ATA/ATAPI-5 T13 1321D revision 1
Supported: 1 2 3 4 5
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
bytes/track: 32256 (obsolete)
bytes/sector: 21298 (obsolete)
current sector capacity: 16514064
LBA user addressable sectors = 29336832
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 1900.0kB ECC bytes: 4 Queue depth: 1
Standby timer values: spec'd by Vendor, no device specific
minimum
r/w multiple sector transfer: Max = 16 Current = 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 *udma4
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* look-ahead
* write cache
* Power Management feature set
Security Mode feature set
SMART feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
12min for SECURITY ERASE UNIT.
HW reset results:
CBLID- above Vih
Device num = 0 determined by the jumper
Checksum: correct
/dev/hdd:
non-removable ATA device, with non-removable media
Model Number: WDC WD400BB-00CLB0
Serial Number: WD-WMAAN1229771
Firmware Revision: 05.04E05
Standards:
Supported: 1 2 3 4 5
Likely used: 5
Configuration:
Logical max current
cylinders 16383 17475
heads 16 15
sectors/track 63 63
bytes/track: 57600 (obsolete)
bytes/sector: 600 (obsolete)
current sector capacity: 16513875
LBA user addressable sectors = 78165360
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 2048.0kB ECC bytes: 40 Queue depth: 1
Standby timer values: spec'd by standard, with device specific
minimum
r/w multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* READ BUFFER cmd
* WRITE BUFFER cmd
* Host Protected Area feature set
* look-ahead
* write cache
* Power Management feature set
Security Mode feature set
SMART feature set
SET MAX security extension
* DOWNLOAD MICROCODE cmd
Security:
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
HW reset results:
CBLID- above Vih
Device num = 1 determined by the jumper
Checksum: correct
at boot :
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 29336832 sectors (15020 MB) w/1900KiB Cache, CHS=1826/255/63,
UDMA(66)
hdd: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63,
UDMA(33)
Let me know if you want me to test patches or provide more information.
Regards,
--
Guillaume Morin <guillaume@morinfr.org>
La vie est facétieuse
next reply other threads:[~2001-12-26 19:25 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-12-26 19:25 Guillaume Morin [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-12-26 5:17 severe slowdown with 2.4 series w/heavy disk access Paul Boley
[not found] ` <01122609375800.01845@manta>
2001-12-25 10:37 ` Paul Boley
2001-12-26 5:51 ` Idrigal (Eric Rautenkranz)
2001-12-26 14:58 ` Alan Cox
2001-12-25 10:33 ` Paul Boley
2001-12-26 16:46 ` Calin A. Culianu
2001-12-26 17:36 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20011226192535.GA11896@morinfr.org \
--to=guillaume@morinfr.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.