From: axel@hh59.org
To: linux-kernel@vger.kernel.org
Subject: 2.5.3 - (IDE) hda: drive not ready for command errors
Date: Fri, 1 Feb 2002 15:33:03 +0100 [thread overview]
Message-ID: <20020201153303.A1508@prester.hh59.org> (raw)
Hallo,
I get these warnings/errors from my kernel. For my feeling it does
not really seem to slow down things a lot but maybe it helps for fixing
errors.
Feb 1 10:16:48 prester kernel: hda: status error: status=0x58 { DriveReady Seek
Feb 1 10:16:48 prester kernel: hda: drive not ready for command
Feb 1 10:16:48 prester kernel: task_out_intr: should not trigger
Feb 1 10:16:48 prester kernel: task_out_intr: should not trigger
and
Feb 1 15:13:55 prester kernel: hda: status timeout: status=0xd0 { Busy }
Feb 1 15:13:55 prester kernel: hda: drive not ready for command
Feb 1 15:13:55 prester kernel: ide0: reset: success
Just now I have experience some new errors, which do not directly seem to be
related to ide but seem strange to me as well. Hope it gives you some clue.
Feb 1 15:22:28 prester kernel: <ry sread (sector 0x5b1bea88) failed
Feb 1 15:22:28 prester kernel: attempt to access beyond end of device
Feb 1 15:22:28 prester kernel: 03:04: rw=0, want=764278084, limit=8377897
Feb 1 15:22:28 prester kernel: Directory sread (sector 0x5b1bea88) failed
Feb 1 15:22:28 prester kernel: attempt to access beyond end of device
Feb 1 15:22:28 prester kernel: 03:04: rw=0, want=764278084, limit=8377897
...
Feb 1 15:22:29 prester kernel: Directory sread (sector 0x7007faf) failed
Feb 1 15:22:29 prester last message repeated 15 times
Axel Siebenwirth
with the following setup:
* kernel 2.5.3
# ATA/IDE/MFM/RLL support
CONFIG_IDE=y
# IDE, ATA and ATAPI Block devices
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_BLK_DEV_IDECD=m
CONFIG_IDE_TASK_IOCTL=y
# IDE chipset support/bugfixes
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
name value min max mode
---- ----- --- --- ----
acoustic 0 0 254 rw
address 0 0 2 rw
bios_cyl 1826 0 65535 rw
bios_head 255 0 255 rw
bios_sect 63 0 63 rw
breada_readahead 8 0 255 rw
bswap 0 0 1 r
current_speed 0 0 69 rw
failures 0 0 65535 rw
file_readahead 124 0 16384 rw
ide_scsi 0 0 1 rw
init_speed 0 0 69 rw
io_32bit 0 0 3 rw
keepsettings 0 0 1 rw
lun 0 0 7 rw
max_failures 1 0 65535 rw
multcount 0 0 16 rw
nice1 1 0 1 rw
nowerr 0 0 1 rw
number 0 0 3 rw
pio_mode write-only 0 255 w
slow 0 0 1 rw
unmaskirq 0 0 1 rw
using_dma 0 0 1 rw
wcache 0 0 1 rw
ide-disk version 1.13
physical 29104/16/63
logical 1826/255/63
QUANTUM FIREBALLlct10 15
00:1f.1 IDE interface: Intel Corporation 82801AA IDE (rev 02) (prog-if 80
[Master])
Subsystem: Intel Corporation 82801AA IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at f000 [size=16]
next reply other threads:[~2002-02-01 14:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-01 14:33 axel [this message]
2002-02-01 16:06 ` 2.5.3 - (IDE) hda: drive not ready for command errors Anton Altaparmakov
2002-02-01 16:48 ` Axel H. Siebenwirth
2002-02-01 17:52 ` Andreas Dilger
2002-02-02 2:44 ` Anton Altaparmakov
2002-02-02 9:26 ` Jens Axboe
2002-02-02 19:10 ` Axel H. Siebenwirth
2002-02-02 21:48 ` Andre Hedrick
2002-02-02 23:28 ` Jens Axboe
2002-02-02 23:58 ` Jens Axboe
2002-02-05 15:32 ` Holger Lubitz
2002-02-05 16:09 ` Anton Altaparmakov
2002-02-05 16:57 ` Holger Lubitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020201153303.A1508@prester.hh59.org \
--to=axel@hh59.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.