From: Heinz Diehl <hd@cavy.de>
To: Pavel Machek <pavel@suse.cz>
Cc: linux-kernel@vger.kernel.org, viro@math.psu.edu
Subject: Re: Warning, 2.5.3 eats filesystems
Date: Fri, 8 Feb 2002 22:48:38 +0100 [thread overview]
Message-ID: <20020208214838.GA1129@chiara.cavy.de> (raw)
In-Reply-To: <20020206233051.GA503@chiara.cavy.de> <Pine.GSO.4.21.0202061836450.22680-100000@weyl.math.psu.edu> <20020208105050.GA175@elf.ucw.cz>
In-Reply-To: <20020208105050.GA175@elf.ucw.cz>
On Fri Feb 08 2002, Pavel Machek wrote:
> For me, mounted filesystems look like this:
[....]
Yep. I sent the "mount" output already to Alexander Viro, unfortunately I
did not Cc: the mail to lkml.
/dev/hda1 on / type ext2 (rw)
proc on /proc type proc (rw)
/dev/hda6 on /usr type ext2 (rw)
/dev/hda5 on /home type ext2 (rw)
/dev/hdb5 on /var/spool/news type ext2 (rw)
tmpfs on /dev/shm type shm (rw)
tmpfs on /tmp type tmpfs (rw)
tmpfs on /var/tmp type tmpfs (rw)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev06)
(prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at e000 [size=16]
[....]
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DHEA-36481, ATA DISK drive
hdb: Conner Peripherals 1275MB - CFS1275A, ATA DISK drive
hdc: CD-540E, ATAPI CD/DVD-ROM drive
hdd: CD-W54E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12692736 sectors (6499 MB) w/472KiB Cache, CHS=790/255/63, UDMA(33)
hdb: 2496876 sectors (1278 MB) w/64KiB Cache, CHS=2477/16/63, DMA
[....]
chiara:~ # hdparm /dev/hda /dev/hdb
/dev/hda:
multcount = 16 (on)
I/O support = 3 (32-bit w/sync)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 790/255/63, sectors = 12692736, start = 0
/dev/hdb:
multcount = 8 (on)
I/O support = 3 (32-bit w/sync)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 619/64/63, sectors = 2496876, start = 0
--
# Heinz Diehl, 68259 Mannheim, Germany
next prev parent reply other threads:[~2002-02-08 21:43 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-05 19:28 Warning, 2.5.3 eats filesystems Pavel Machek
2002-02-05 23:14 ` Daniel Pittman
2002-02-06 0:59 ` Skip Ford
2002-02-06 1:39 ` Dave Jones
2002-02-06 4:59 ` Daniel Pittman
2002-02-06 15:42 ` Pavel Machek
2002-02-06 23:30 ` Heinz Diehl
2002-02-06 23:39 ` Alexander Viro
2002-02-07 20:34 ` Heinz Diehl
2002-02-08 10:50 ` Pavel Machek
2002-02-08 21:48 ` Heinz Diehl [this message]
2002-02-08 11:14 ` Pavel Machek
2002-02-08 21:50 ` Andre Hedrick
2002-02-08 11:36 ` WARNING: 2.5.3 -- IDE damages data! [was Re: Warning, 2.5.3 eats filesystems] Pavel Machek
2002-02-06 17:49 ` Warning, 2.5.3 eats filesystems Olaf Zaplinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020208214838.GA1129@chiara.cavy.de \
--to=hd@cavy.de \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@suse.cz \
--cc=viro@math.psu.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.