From: Vojtech Pavlik <vojtech@suse.cz>
To: Hal Duston <hald@sound.net>
Cc: linux-kernel@vger.kernel.org
Subject: Re: Input w/2.5.3-dj3
Date: Sat, 9 Feb 2002 18:00:40 +0100 [thread overview]
Message-ID: <20020209180040.B18474@suse.cz> (raw)
In-Reply-To: <Pine.GSO.4.10.10202081309380.9070-100000@sound.net>
In-Reply-To: <Pine.GSO.4.10.10202081309380.9070-100000@sound.net>; from hald@sound.net on Fri, Feb 08, 2002 at 01:12:05PM -0600
On Fri, Feb 08, 2002 at 01:12:05PM -0600, Hal Duston wrote:
> I have disabled CONTIG_KEYBOARD_XTKBD again.
>
> Here are the things that might be relevant.
>
> BTW, this is an IBM Thinkpad 700 PS/2.
> (Microchannel bus)
>
> Thanks,
> Hal Duston
> hald@sound.net
Thanks for the log, it seems the atkbd.c driver just times out. Can you
change the "timeout" values in drivers/input/keyboard/atkbd.c in the
functions "atkbd_sendbyte" and "atkbd_command" to about ten times the
current values?
That should fix the problem. In either case, please tell me.
>
> -- Begin console --
> . . .
> Micro Channel bus detected.
> . . .
> mice: PS/2 mouse device common for all mice
> serio: i8042 KBD port at 0x60,0x64 irq 1
> input: PS/2 Generic Mouse on isa0060/serio1
> serio: AUX port at 0x60,0x64 irq 12
> . . .
> -- End console --
>
> -- Begin /var/log/debug --
> i8042.c: 20 -> i8042 (command) [0]
> i8042.c: 25 <- i8042 (return) [0]
> i8042.c: 60 -> i8042 (command) [0]
> i8042.c: 34 -> i8042 (parameter) [0]
> i8042.c: 60 -> i8042 (command) [0]
> i8042.c: 25 -> i8042 (parameter) [0]
> i8042.c: f6 -> i8042 (kbd-data) [0]
> i8042.c: fa <- i8042 (interrupt-kbd) [0]
> i8042.c: f2 -> i8042 (kbd-data) [0]
> i8042.c: 60 -> i8042 (command) [1]
> i8042.c: 34 -> i8042 (parameter) [1]
> i8042.c: 60 -> i8042 (command) [2]
> i8042.c: 25 -> i8042 (parameter) [2]
> i8042.c: fa <- i8042 (interrupt-kbd) [2]
> atkbd.c: Sent: f5
> i8042.c: f5 -> i8042 (kbd-data) [2]
> i8042.c: 60 -> i8042 (command) [2]
> i8042.c: 34 -> i8042 (parameter) [2]
> i8042.c: fa <- i8042 (flush) [3]
> i8042.c: d3 -> i8042 (command) [3]
> i8042.c: 5a -> i8042 (parameter) [3]
> i8042.c: a5 <- i8042 (return) [3]
> i8042.c: a9 -> i8042 (command) [3]
> i8042.c: 00 <- i8042 (return) [3]
> i8042.c: a7 -> i8042 (command) [3]
> i8042.c: 20 -> i8042 (command) [3]
> i8042.c: 34 <- i8042 (return) [3]
> i8042.c: a9 -> i8042 (command) [3]
> i8042.c: 00 <- i8042 (return) [3]
> i8042.c: a8 -> i8042 (command) [3]
> i8042.c: 20 -> i8042 (command) [3]
> i8042.c: 14 <- i8042 (return) [3]
> i8042.c: 60 -> i8042 (command) [3]
> i8042.c: 34 -> i8042 (parameter) [3]
> i8042.c: 60 -> i8042 (command) [3]
> i8042.c: 16 -> i8042 (parameter) [3]
> i8042.c: d4 -> i8042 (command) [4]
> i8042.c: f6 -> i8042 (parameter) [4]
> i8042.c: 60 -> i8042 (command) [4]
> i8042.c: 16 -> i8042 (parameter) [4]
> i8042.c: fa <- i8042 (interrupt-aux) [4]
> i8042.c: d4 -> i8042 (command) [4]
> i8042.c: f2 -> i8042 (parameter) [4]
> i8042.c: 60 -> i8042 (command) [4]
> i8042.c: 16 -> i8042 (parameter) [4]
> i8042.c: fa <- i8042 (interrupt-aux) [4]
> i8042.c: 00 <- i8042 (interrupt-aux) [4]
> i8042.c: d4 -> i8042 (command) [5]
> i8042.c: e8 -> i8042 (parameter) [5]
> i8042.c: 60 -> i8042 (command) [5]
> i8042.c: 16 -> i8042 (parameter) [5]
> i8042.c: fa <- i8042 (interrupt-aux) [5]
> i8042.c: d4 -> i8042 (command) [5]
> i8042.c: 03 -> i8042 (parameter) [5]
> i8042.c: 60 -> i8042 (command) [5]
> i8042.c: 16 -> i8042 (parameter) [5]
> i8042.c: fa <- i8042 (interrupt-aux) [5]
> i8042.c: d4 -> i8042 (command) [5]
> i8042.c: e6 -> i8042 (parameter) [5]
> i8042.c: 60 -> i8042 (command) [5]
> i8042.c: 16 -> i8042 (parameter) [5]
> i8042.c: fa <- i8042 (interrupt-aux) [6]
> i8042.c: d4 -> i8042 (command) [6]
> i8042.c: e6 -> i8042 (parameter) [6]
> i8042.c: 60 -> i8042 (command) [6]
> i8042.c: 16 -> i8042 (parameter) [6]
> i8042.c: fa <- i8042 (interrupt-aux) [6]
> i8042.c: d4 -> i8042 (command) [6]
> i8042.c: e6 -> i8042 (parameter) [6]
> i8042.c: 60 -> i8042 (command) [6]
> i8042.c: 16 -> i8042 (parameter) [6]
> i8042.c: fa <- i8042 (interrupt-aux) [7]
> i8042.c: d4 -> i8042 (command) [7]
> i8042.c: e9 -> i8042 (parameter) [7]
> i8042.c: 60 -> i8042 (command) [7]
> i8042.c: 16 -> i8042 (parameter) [7]
> i8042.c: fa <- i8042 (interrupt-aux) [7]
> i8042.c: 00 <- i8042 (interrupt-aux) [7]
> i8042.c: 03 <- i8042 (interrupt-aux) [7]
> i8042.c: 64 <- i8042 (interrupt-aux) [8]
> i8042.c: d4 -> i8042 (command) [8]
> i8042.c: e8 -> i8042 (parameter) [8]
> i8042.c: 60 -> i8042 (command) [8]
> i8042.c: 16 -> i8042 (parameter) [8]
> i8042.c: fa <- i8042 (interrupt-aux) [8]
> i8042.c: d4 -> i8042 (command) [8]
> i8042.c: 00 -> i8042 (parameter) [8]
> i8042.c: 60 -> i8042 (command) [8]
> i8042.c: 16 -> i8042 (parameter) [8]
> i8042.c: fa <- i8042 (interrupt-aux) [8]
> i8042.c: d4 -> i8042 (command) [8]
> i8042.c: e6 -> i8042 (parameter) [8]
> i8042.c: 60 -> i8042 (command) [9]
> i8042.c: 16 -> i8042 (parameter) [9]
> i8042.c: fa <- i8042 (interrupt-aux) [9]
> i8042.c: d4 -> i8042 (command) [9]
> i8042.c: e6 -> i8042 (parameter) [9]
> i8042.c: 60 -> i8042 (command) [9]
> i8042.c: 16 -> i8042 (parameter) [9]
> i8042.c: fa <- i8042 (interrupt-aux) [9]
> i8042.c: d4 -> i8042 (command) [9]
> i8042.c: e6 -> i8042 (parameter) [9]
> i8042.c: 60 -> i8042 (command) [9]
> i8042.c: 16 -> i8042 (parameter) [9]
> i8042.c: fa <- i8042 (interrupt-aux) [10]
> i8042.c: d4 -> i8042 (command) [10]
> i8042.c: e9 -> i8042 (parameter) [10]
> i8042.c: 60 -> i8042 (command) [10]
> i8042.c: 16 -> i8042 (parameter) [10]
> i8042.c: fa <- i8042 (interrupt-aux) [10]
> i8042.c: 00 <- i8042 (interrupt-aux) [10]
> i8042.c: 00 <- i8042 (interrupt-aux) [11]
> i8042.c: 64 <- i8042 (interrupt-aux) [11]
> i8042.c: d4 -> i8042 (command) [11]
> i8042.c: f3 -> i8042 (parameter) [11]
> i8042.c: 60 -> i8042 (command) [11]
> i8042.c: 16 -> i8042 (parameter) [11]
> i8042.c: fa <- i8042 (interrupt-aux) [11]
> i8042.c: d4 -> i8042 (command) [11]
> i8042.c: c8 -> i8042 (parameter) [11]
> i8042.c: 60 -> i8042 (command) [11]
> i8042.c: 16 -> i8042 (parameter) [11]
> i8042.c: fa <- i8042 (interrupt-aux) [11]
> i8042.c: d4 -> i8042 (command) [11]
> i8042.c: f3 -> i8042 (parameter) [11]
> i8042.c: 60 -> i8042 (command) [12]
> i8042.c: 16 -> i8042 (parameter) [12]
> i8042.c: fa <- i8042 (interrupt-aux) [12]
> i8042.c: d4 -> i8042 (command) [12]
> i8042.c: 64 -> i8042 (parameter) [12]
> i8042.c: 60 -> i8042 (command) [12]
> i8042.c: 16 -> i8042 (parameter) [12]
> i8042.c: fa <- i8042 (interrupt-aux) [12]
> i8042.c: d4 -> i8042 (command) [12]
> i8042.c: f3 -> i8042 (parameter) [12]
> i8042.c: 60 -> i8042 (command) [12]
> i8042.c: 16 -> i8042 (parameter) [12]
> i8042.c: fa <- i8042 (interrupt-aux) [13]
> i8042.c: d4 -> i8042 (command) [13]
> i8042.c: 50 -> i8042 (parameter) [13]
> i8042.c: 60 -> i8042 (command) [13]
> i8042.c: 16 -> i8042 (parameter) [13]
> i8042.c: fa <- i8042 (interrupt-aux) [13]
> i8042.c: d4 -> i8042 (command) [13]
> i8042.c: f2 -> i8042 (parameter) [13]
> i8042.c: 60 -> i8042 (command) [13]
> i8042.c: 16 -> i8042 (parameter) [13]
> i8042.c: fa <- i8042 (interrupt-aux) [14]
> i8042.c: 00 <- i8042 (interrupt-aux) [14]
> i8042.c: d4 -> i8042 (command) [14]
> i8042.c: f3 -> i8042 (parameter) [14]
> i8042.c: 60 -> i8042 (command) [14]
> i8042.c: 16 -> i8042 (parameter) [14]
> i8042.c: fa <- i8042 (interrupt-aux) [14]
> i8042.c: d4 -> i8042 (command) [14]
> i8042.c: 64 -> i8042 (parameter) [14]
> i8042.c: 60 -> i8042 (command) [15]
> i8042.c: 16 -> i8042 (parameter) [15]
> i8042.c: fa <- i8042 (interrupt-aux) [15]
> i8042.c: d4 -> i8042 (command) [15]
> i8042.c: f3 -> i8042 (parameter) [15]
> i8042.c: 60 -> i8042 (command) [15]
> i8042.c: 16 -> i8042 (parameter) [15]
> i8042.c: fa <- i8042 (interrupt-aux) [15]
> i8042.c: d4 -> i8042 (command) [15]
> i8042.c: c8 -> i8042 (parameter) [15]
> i8042.c: 60 -> i8042 (command) [15]
> i8042.c: 16 -> i8042 (parameter) [15]
> i8042.c: fa <- i8042 (interrupt-aux) [16]
> i8042.c: d4 -> i8042 (command) [16]
> i8042.c: e8 -> i8042 (parameter) [16]
> i8042.c: 60 -> i8042 (command) [16]
> i8042.c: 16 -> i8042 (parameter) [16]
> i8042.c: fa <- i8042 (interrupt-aux) [16]
> i8042.c: d4 -> i8042 (command) [16]
> i8042.c: 03 -> i8042 (parameter) [16]
> i8042.c: 60 -> i8042 (command) [16]
> i8042.c: 16 -> i8042 (parameter) [16]
> i8042.c: fa <- i8042 (interrupt-aux) [16]
> i8042.c: d4 -> i8042 (command) [16]
> i8042.c: e6 -> i8042 (parameter) [16]
> i8042.c: 60 -> i8042 (command) [17]
> i8042.c: 16 -> i8042 (parameter) [17]
> i8042.c: fa <- i8042 (interrupt-aux) [17]
> i8042.c: d4 -> i8042 (command) [17]
> i8042.c: ea -> i8042 (parameter) [17]
> i8042.c: 60 -> i8042 (command) [17]
> i8042.c: 16 -> i8042 (parameter) [17]
> i8042.c: fa <- i8042 (interrupt-aux) [17]
> i8042.c: d4 -> i8042 (command) [17]
> i8042.c: f4 -> i8042 (parameter) [17]
> i8042.c: 60 -> i8042 (command) [18]
> i8042.c: 16 -> i8042 (parameter) [18]
> i8042.c: fa <- i8042 (interrupt-aux) [18]
> -- End /var/log/debug --
--
Vojtech Pavlik
SuSE Labs
next prev parent reply other threads:[~2002-02-09 17:01 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-02-08 19:12 Input w/2.5.3-dj3 Hal Duston
2002-02-09 17:00 ` Vojtech Pavlik [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-02-14 19:24 Hal Duston
2002-02-15 0:22 ` Vojtech Pavlik
2002-02-12 1:00 Hal Duston
2002-02-12 9:00 ` Vojtech Pavlik
2002-02-11 20:39 Hal Duston
2002-02-11 20:55 ` Vojtech Pavlik
2002-02-11 17:56 Hal Duston
2002-02-11 17:58 ` Vojtech Pavlik
2002-02-07 17:55 Hal Duston
2002-02-08 7:17 ` Vojtech Pavlik
2002-02-07 16:43 Hal Duston
2002-02-07 16:51 ` Dave Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020209180040.B18474@suse.cz \
--to=vojtech@suse.cz \
--cc=hald@sound.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.