From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: To: "=?iso-8859-1?Q?Jo=EBl_Soete?=" Cc: parisc-linux@lists.parisc-linux.org In-Reply-To: Message from "=?iso-8859-1?Q?Jo=EBl_Soete?=" of "Wed, 13 Feb 2002 19:18:37 +0100." References: Date: Thu, 14 Feb 2002 21:48:36 -0700 From: Grant Grundler Message-Id: <20020215044836.9DA08484F@dsl2.external.hp.com> Subject: [parisc-linux] Re: kernel-2.4.17-pa22 boot problem B132L+ with serial Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: "=?iso-8859-1?Q?Jo=EBl_Soete?=" wrote: > Sorry first for delay. > > Sorry also if I desapoint you but "CONFIG_TULIP_MMIO=y" works for my b180 > (afaik same HW than b132l+ but processor clock?) with last k-2.4.17-pa23: Disappointed?! are you kidding?! This is great! :^) > ... > RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize > loop: loaded (max 8 devices) > Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001) > tulip0: no phy info, aborting mtable build > tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1. > eth0: Digital DS21143 Tulip rev 65 at 0xf0fff000, 00:10:83:65:09:4B, IRQ > 96. Is this output from B132L with card-mode Dino? or with built-in 21143 on B180L? Just curious.... thanks, grant