From: rwhron@earthlink.net
To: linux-kernel@vger.kernel.org
Subject: Opss! on 2.5.6 with ReiserFS
Date: Sun, 10 Mar 2002 14:26:09 -0500 [thread overview]
Message-ID: <20020310142609.A22174@rushmore> (raw)
I have got oops at boot time from 2.5.6-pre3 and 2.5.6 on
system with reiserfs root filesystem on ide. Oops occurs
during attempt to mount /. No modules in kernel.
2.5.6-pre2 was okay.
2.5.6:
Unable to handle kernel NULL pointer dereference at virtual address 00000010
c012cae6
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c012cae6>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010292
eax: d8802000 ebx: 0000000f ecx: 00000009 edx: 00000000
esi: 00000009 edi: 00002012 ebp: 00000000 esp: c143bd7c
ds: 0018 es: 0018 ss: 0018
Stack: 00001000 00002012 00000000 d7e9a800 c0123f4b c012cfdb 00000000 00002012
00001000 d7e9a800 d7e54000 d88133ec c012d19c 00000000 00002012 00001000
d7e9a800 c018cb53 00000000 00002012 00001000 00000400 00000000 d7e9a954
Call Trace: [<c0123f4b>] [<c012cfdb>] [<c012d19c>] [<c018cb53>] [<c012c480>]
[<c017f486>] [<c017fd43>] [<c0195402>] [<c0130329>] [<c0180112>] [<c017fc1c>]
[<c01304cf>] [<c013ecb8>] [<c013ef6e>] [<c013edd4>] [<c013f2e0>] [<c01051e9>]
[<c0105028>] [<c0105550>]
Code: 0f b7 45 10 b0 00 66 0f b6 55 10 01 d0 25 ff ff 00 00 89 44
>>EIP; c012cae6 <__get_hash_table+1a/9c> <=====
Trace; c0123f4b <__vmalloc+fb/1c0>
Trace; c012cfdb <__getblk+17/38>
Trace; c012d19c <__bread+14/6c>
Trace; c018cb53 <journal_init+eb/68c>
Trace; c012c480 <__wait_on_buffer+84/90>
Trace; c017f486 <read_bitmaps+ce/160>
Trace; c017fd43 <reiserfs_fill_super+127/490>
Trace; c0195402 <sprintf+12/18>
Trace; c0130329 <get_sb_bdev+22d/29c>
Trace; c0180112 <reiserfs_get_sb+1a/20>
Trace; c017fc1c <reiserfs_fill_super+0/490>
Trace; c01304cf <do_kern_mount+47/c4>
Trace; c013ecb8 <do_add_mount+64/130>
Trace; c013ef6e <do_mount+14a/164>
Trace; c013edd4 <copy_mount_options+50/a0>
Trace; c013f2e0 <sys_mount+7c/bc>
Trace; c01051e9 <prepare_namespace+a9/e0>
Trace; c0105028 <init+c/124>
Trace; c0105550 <kernel_thread+28/38>
Code; c012cae6 <__get_hash_table+1a/9c>
00000000 <_EIP>:
Code; c012cae6 <__get_hash_table+1a/9c> <=====
0: 0f b7 45 10 movzwl 0x10(%ebp),%eax <=====
Code; c012caea <__get_hash_table+1e/9c>
4: b0 00 mov $0x0,%al
Code; c012caec <__get_hash_table+20/9c>
6: 66 0f b6 55 10 movzbw 0x10(%ebp),%dx
Code; c012caf1 <__get_hash_table+25/9c>
b: 01 d0 add %edx,%eax
Code; c012caf3 <__get_hash_table+27/9c>
d: 25 ff ff 00 00 and $0xffff,%eax
Code; c012caf8 <__get_hash_table+2c/9c>
12: 89 44 00 00 mov %eax,0x0(%eax,%eax,1)
<0>Kernel panic: Attempted to kill init!
2.5.6-pre3 oops looks almost identical. It is at
http://home.earthlink.net/~rwhron/kernel/2.5.6p3.ksymoops
CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y
CONFIG_EXPERIMENTAL=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
CONFIG_MK6=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_TSC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_NOHIGHMEM=y
CONFIG_MTRR=y
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_BLK_DEV_FD=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_8139TOO=y
CONFIG_SOUND_GAMEPORT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_SERIAL=y
CONFIG_SERIAL_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=64
CONFIG_REISERFS_FS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_MSDOS_PARTITION=y
CONFIG_VGA_CONSOLE=y
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
--
Randy Hron
next reply other threads:[~2002-03-10 19:21 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-03-10 19:26 rwhron [this message]
2002-03-10 21:57 ` Opss! on 2.5.6 with ReiserFS Sebastian Droege
2002-03-11 6:44 ` Oleg Drokin
-- strict thread matches above, loose matches on Subject: below --
2002-03-11 11:19 rwhron
2002-03-10 15:58 system_lists
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020310142609.A22174@rushmore \
--to=rwhron@earthlink.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.