From: Gianni <jumpyj@libero.it>
To: linux-kernel@vger.kernel.org
Subject: PROBLEM: maybe bug in timer with kernel 2.4.18-ac3
Date: Thu, 9 May 2002 22:03:12 +0200 [thread overview]
Message-ID: <200205092005.g49K57301283@linux.local> (raw)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I report execution of scripts/ver_linux of the kernel source directory:
(root@linux:/usr/src/linux/scripts >sh ver_linux)
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux linux 2.4.18-ac3 #1 Sat Mar 9 19:27:26 CET 2002 i686 unknown
Gnu C 2.95.2
Gnu make 3.79.1
binutils 2.10.0.33
util-linux 2.11n
mount 2.11n
modutils 2.4.14
e2fsprogs 1.27-WIP
pcmcia-cs 3.1.22
PPP 2.4.1b2
Linux C Library x 1 root root 1382179 dic 18 16:32
/lib/libc.so.6
Dynamic linker (ldd) 2.2
Procps 2.0.7
Net-tools 1.57
Kbd 1.02
Sh-utils 2.0
Modules Loaded snd-pcm-oss snd-pcm-plugin snd-mixer-oss ipv6
snd-seq-midi snd-seq-midi-event snd-seq snd-card-emu10k1 snd-emu10k1
snd-emux-mem snd-pcm snd-timer snd-rawmidi snd-ac97-codec snd-mixer
snd-seq-device snd soundcore mousedev hid input usb-ohci ipt_limit ipt_state
iptable_mangle iptable_nat ip_conntrack iptable_filter ip_tables usbcore
aic7xxx_old
(Well, there's an error because I used gcc 2.95.3: I compiled it form sources
with gcc-2.95.2).
The problem is with CMOS clock.
I have this problem: the kernel doesn't match the right clock time. I have to
set my CMOS clock with 2 hours first to view the right clock with: 'date',
but if I use date -u it response exactly. How ever when I shutdown machine
and I get power on after a bit, for example 15 minutes, I view the clock is
10 minutes back. A time I shuted-down machine I get power on and the clock
was very mistakes. About 12 hours back.
********** less /proc/version gives:
Linux version 2.4.18-ac3 (root@linux) (gcc version 2.95.3 20010315 (release))
#1
********** less /proc/cpuinfo gives:
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 4
model name : AMD Athlon(tm) Processor
stepping : 4
cpu MHz : 1410.312
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov
bogomips : 2811.49
********** less /proc/modules gives:
snd-pcm-oss 18540 1 (autoclean)
snd-pcm-plugin 14864 0 (autoclean) [snd-pcm-oss]
snd-mixer-oss 4924 1 (autoclean) [snd-pcm-oss]
ipv6 126100 -1 (autoclean)
snd-seq-midi 3136 0 (unused)
snd-seq-midi-event 3040 0 [snd-seq-midi]
snd-seq 41488 0 [snd-seq-midi snd-seq-midi-event]
snd-card-emu10k1 2208 2
snd-emu10k1 21216 0 [snd-card-emu10k1]
snd-emux-mem 1216 0 [snd-emu10k1]
snd-pcm 30720 0 [snd-pcm-oss snd-pcm-plugin snd-emu10k1]
snd-timer 8980 0 [snd-seq snd-pcm]
snd-rawmidi 10208 0 [snd-seq-midi snd-emu10k1]
snd-ac97-codec 23528 0 [snd-emu10k1]
snd-mixer 27524 0 [snd-mixer-oss snd-emu10k1 snd-ac97-codec]
snd-seq-device 3788 0 [snd-seq-midi snd-seq snd-card-emu10k1
snd-rawmidi]
snd 33056 1 [snd-pcm-oss snd-pcm-plugin snd-mixer-oss
snd-seq-midi snd-seq-midi-event snd-seq snd-card-emu10k1 snd-emu10k1
snd-emux-mem snd-pcm snd-timer snd-rawmidi snd-ac97-codec snd-mixer
snd-seq-device]
soundcore 3588 5 [snd]
mousedev 3864 0 (unused)
hid 12904 0 (unused)
input 3392 0 [mousedev hid]
usb-ohci 17896 0 (unused)
ipt_limit 952 1 (autoclean)
ipt_state 600 2 (autoclean)
iptable_mangle 2132 0 (autoclean) (unused)
iptable_nat 12952 0 (autoclean) (unused)
ip_conntrack 13240 2 (autoclean) [ipt_state iptable_nat]
iptable_filter 1704 1 (autoclean)
ip_tables 10616 7 [ipt_limit ipt_state iptable_mangle
iptable_nat iptable_filter]
usbcore 48896 1 [hid usb-ohci]
aic7xxx_old 109632 0 (unused)
********** less /proc/ioports gives:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
a000-a0ff : Adaptec AHA-7850
a000-a0fe : aic7xxx
a400-a407 : Creative Labs SB Live!
a800-a81f : Creative Labs SB Live! EMU10k1
a800-a81f : EMU10K1
b400-b40f : Acer Laboratories Inc. [ALi] M5229 IDE
b400-b407 : ide0
b408-b40f : ide1
d000-dfff : PCI Bus #01
d800-d8ff : ATI Technologies Inc Radeon VE QY
e400-e43f : Acer Laboratories Inc. [ALi] M7101 PMU
e800-e81f : Acer Laboratories Inc. [ALi] M7101 PMU
********** less /proc/iomem gives:
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-0ffebfff : System RAM
00100000-0025fbf0 : Kernel code
0025fbf1-002cc93f : Kernel data
0ffec000-0ffeefff : ACPI Tables
0ffef000-0fffefff : reserved
0ffff000-0fffffff : ACPI Non-volatile Storage
e4800000-e4800fff : Adaptec AHA-7850
e5800000-e5800fff : Acer Laboratories Inc. [ALi] M5237 USB (#2)
e5800000-e5800fff : usb-ohci
e6800000-e6800fff : Acer Laboratories Inc. [ALi] M5237 USB
e6800000-e6800fff : usb-ohci
e7000000-e7efffff : PCI Bus #01
e7000000-e700ffff : ATI Technologies Inc Radeon VE QY
e7000000-e700ffff : radeonfb
e7f00000-efffffff : PCI Bus #01
e8000000-efffffff : ATI Technologies Inc Radeon VE QY
e8000000-efffffff : radeonfb
f0000000-f7ffffff : PCI device 10b9:1647 (Acer Laboratories Inc. [ALi])
ffff0000-ffffffff : reserved
********** llspci -vvv (as root) gives:
00:00.0 Host bridge: Acer Laboratories Inc. [ALi]: Unknown device 1647 (rev
04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR+
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [b0] AGP version 2.0
Status: RQ=27 SBA+ 64bit- FW+ Rate=x1,x2
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [a4] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5247 (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e7000000-e7efffff
Prefetchable memory behind bridge: e7f00000-efffffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:02.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
(prog-if 10 [OHCI])
Subsystem: Acer Laboratories Inc. [ALi] M5237 USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e6800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c4)
(prog-if fa)
Subsystem: Asustek Computer, Inc.: Unknown device 8053
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at b400 [size=16]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:06.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
(prog-if 10 [OHCI])
Subsystem: Acer Laboratories Inc. [ALi] M5237 USB
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV]
Subsystem: Acer Laboratories Inc. [ALi] ALI M1533 Aladdin IV ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [a0] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10000 (rev 07)
Subsystem: Creative Labs: Unknown device 8061
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at a800 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.1 Input device controller: Creative Labs SB Live! (rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at a400 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0c.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
Subsystem: Adaptec AHA-2904/Integrated AIC-7850
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000 [size=256]
Region 1: Memory at e4800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 Bridge: Acer Laboratories Inc. [ALi] M7101 PMU
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5159
(prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 013a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at d800 [size=256]
Region 2: Memory at e7000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at e7fe0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=47 SBA+ 64bit- FW- Rate=x1,x2
Command: RQ=27 SBA+ AGP+ 64bit- FW- Rate=x1
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
********** less /proc/scsi/scsi gives:
Attached devices: none
********** less /proc/interrupts gives:
CPU0
0: 194878 XT-PIC timer
1: 4571 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 0 XT-PIC usb-ohci
9: 0 XT-PIC usb-ohci
10: 28029 XT-PIC EMU10K1
11: 14 XT-PIC aic7xxx
12: 71541 XT-PIC PS/2 Mouse
14: 64626 XT-PIC ide0
15: 2 XT-PIC ide1
NMI: 0
LOC: 194848
ERR: 540
MIS: 0
My system is : ASUS A7A266, Athlon 1,4 GHz, 256 MByte DDR SDRAM, PCI Sound
CARD Sound Blaster Live Player 5.1, Graphic CARD: ATI RADEON VE 32 MByte DDR.
Can you reply and tell me if is the wrong time on my SuSE Linux 7.1 is a
kernel bug or if it's something else? I thank you for all your work and I
tell everyone develops Linux kernel: "go on".
Gianni, a Linux User
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.6 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE82tYAnT2ev4/bQKARAla2AJ9O7+e9EX5mPLqt2VwaAB9fNYQPZQCeNicA
FD188iIf759GA8NCGe2tfTo=
=a4Ao
-----END PGP SIGNATURE-----
reply other threads:[~2002-05-09 20:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200205092005.g49K57301283@linux.local \
--to=jumpyj@libero.it \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.