From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matt Garman Subject: diald slow to be useful... Date: Thu, 09 May 2002 22:09:52 -0500 Sender: linux-diald-owner@vger.kernel.org Message-ID: <20020509220952.A587@raw-sewage.net> Reply-To: Matt Garman Mime-Version: 1.0 Return-path: Content-Disposition: inline List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-diald@vger.kernel.org I'm running Debian "potato" as my firewall/lan gateway/diald server. The box is running diald 0.99.1-1. Diald works almost as expected (connects to the Internet, hangs up after timeout). Diald dials and gets PPP up and running rather quickly. However, the connection that triggered diald has to timeout and retry before it does anything useful. Here's a concrete example: diald runs on septictank, my workstation is sewage. On sewage, I try to do a google search. Immediately the modem dials, and after a few seconds, the PPP connection is up and running---I can use any Internet protocol except http. I have to wait for the browser to timeout trying to reach google, then retry the search. But during that waiting period, I could do a fetchmail. The diald FAQ addresses this and says to try the option "buffer-packets on". I've tried with this option both on and off, and the problem persists both ways. Another suggestion I found on the 'net was to set /proc/sys/net/ipv4/ip_dynaddr to 1. I did this on septictank, and it also had no effect. Does anyone have a fix for this or any suggestions? Thanks for your help! Matt -- Matt Garman, garman@raw-sewage.net ``I ain't never seen no whiskey, the blues made my sloppy drunk!'' -- Sleepy John Estes, ``Leaving Trunk''