request

request

[§]

Hi, I have been enjoying your lm_sensors for a couple of years I guess it's 
been on an i815 mobo (and similar).  But I am going amd, and would soo much 
appreciate support for the Via VT8367(KT333).  I see where the VT8233A 
southbridge is recognized in cvs so I'm hoping for continued developement of 
that too.

I would so much love to help with developement, but alas know just enough to 
utilize other's work.  Of course I'd be first in line to test and I also 
wouldn't mind supporting your project with a donation.

I hope to have the opportunity to continue enjoying lm_sensors or helping you 
out in some way.

Thank you,
-?rlinuxx

request

[Mark D. Studebaker]

what do you need? What southbridge do you have - is it the VT8233A or
something else?
Do you have the VT1211 Super I/O? that's supported in CVS too.
Let us know.
mds

? wrote:
> 
> Hi, I have been enjoying your lm_sensors for a couple of years I guess it's
> been on an i815 mobo (and similar).  But I am going amd, and would soo much
> appreciate support for the Via VT8367(KT333).  I see where the VT8233A
> southbridge is recognized in cvs so I'm hoping for continued developement of
> that too.
> 
> I would so much love to help with developement, but alas know just enough to
> utilize other's work.  Of course I'd be first in line to test and I also
> wouldn't mind supporting your project with a donation.
> 
> I hope to have the opportunity to continue enjoying lm_sensors or helping you
> out in some way.
> 
> Thank you,
> -?rlinuxx

request

[Mark D. Studebaker]

Thank you very much for the generous offer of a monetary donation.
Unfortunately we are not currently set up to accept such donations,
and there are several challenges to doing so.
Therefore we must reluctantly decline your offer.

Should you wish to make a donation of equipment, etc.,
for testing or development, that we can accept,
please let us know.

thanks again.
mds



s wrote:
> 
> Dear Mark,
> As stated previously I would love to make a small donation to your
> cause but could not find any links from your site.  Where might one
> send monitary donations to the lm_sensors project?
> 
> thanks,
> -srlinuxx
> 
> On Wednesday 03 July 2002 08:17 pm, you wrote:
> > what do you need? What southbridge do you have - is it the VT8233A
> > or something else?
> > Do you have the VT1211 Super I/O? that's supported in CVS too.
> > Let us know.
> > mds
> >
> > ? wrote:
> > > Hi, I have been enjoying your lm_sensors for a couple of years I
> > > guess it's been on an i815 mobo (and similar).  But I am going
> > > amd, and would soo much appreciate support for the Via
> > > VT8367(KT333).  I see where the VT8233A southbridge is recognized
> > > in cvs so I'm hoping for continued developement of that too.
> > >
> > > I would so much love to help with developement, but alas know
> > > just enough to utilize other's work.  Of course I'd be first in
> > > line to test and I also wouldn't mind supporting your project
> > > with a donation.
> > >
> > > I hope to have the opportunity to continue enjoying lm_sensors or
> > > helping you out in some way.
> > >
> > > Thank you,
> > > -?rlinuxx

Re: request

[Erick Hanns Teppo]

Re:Hello,
 
I wanted to follow up on the funding request you shared with us 
previously. If you haven't yet secured the necessary financing, 
we would like to invite you to revisit our offer and explore how 
we can collaborate to achieve your goals this year.
 
At Lex Capital Group, we are seeking to expand and establish our 
business interests internationally, focusing on sectors such as 
Oil and Gas, Construction, Real Estate, Tourism and Hospitality, 
Stock Trading, Mining, Transportation, Healthcare, Communication 
Services, Agriculture, Forestry, and Fishing. We are also open to 
exploring other industries with strong potential for a solid 
return on investment (ROI).
 
If you are seeking funding or partnership opportunities in any of 
these sectors or have a viable business idea in another high-
potential industry, please let us know. We are eager to discuss 
how we can support your vision and help bring it to life.
 
Let me know if you'd like MORE information to explore this 
opportunity further. Our commitment remains steadfast in 
supporting credible ventures that promise growth and mutual 
success.
 
Looking forward to your response.
 
Best regards,
Erick Hanns Teppo
Group Investment Director
Lex Capital Group

REQUEST

[Johann Reimann]

Good day,

My Name is Johann Reimann and i have something important to discuss with you but only with your permission i will proceed.

Regards
J. Reimann

Request

[G.E]

 I am Ms.Golan I am getting in touch with you regarding an extremely important and urgent matter.If you would oblige me the opportunity,shall provide you with details upon your response to my private Email: eg13133@qq.com

Faithfully,
Ms. Golan

Request

[G.E]

 I am Ms.Golan I am getting in touch with you regarding an extremely important and urgent matter.If you would oblige me the opportunity,shall provide you with details upon your response to my private Email: eg13133@qq.com

Faithfully,
Ms. Golan

Request

[G.E]

 I am Ms.Golan I am getting in touch with you regarding an extremely important and urgent matter.If you would oblige me the opportunity,shall provide you with details upon your response to my private Email: eg13133@qq.com

Faithfully,
Ms. Golan

request

[Chao Xie]

[-- Attachment #1.1: Type: text/plain, Size: 0 bytes --]



[-- Attachment #1.2: Type: text/html, Size: 82 bytes --]

[-- Attachment #2: Type: text/plain, Size: 155 bytes --]

_______________________________________________
lttng-dev mailing list
lttng-dev@lists.lttng.org
http://lists.lttng.org/cgi-bin/mailman/listinfo/lttng-dev

Request.

[Cham Tao Soon]

I need your assistance to move funds from Singapore. I will forward details
upon your request.

Cham Tao Soon

Request

[Pole Olasis]

We need a representative in your area.We're a small new firm engaged in export.Approximately 80K monthly from customers,& 10% each is your commission.To know more, reply.Pole Olasis,

Request.

[C.T.Soon]

I need your assistance to move funds from Singapore. I will forward
details upon your request.

Cham Tao Soon

Request

[Tina Harry]

Hello

I am currently sending you this mail from my sick bed in the hospital. My
husband earned these funds (10,800,000.00 USD) but he died in a plane
crash and left everything behind for me and I will join him soon due to my
ill health. Due to my infertility resulting from medical problems I became
barren. God has a reason for everything. I would want you to contact my
lawyer; he will inform you on what to do. Contact him with the below
details:

Barrister Barney Daniels

Email: bbdmotive@live.co.uk

Telephone: +44-703-593-5001


Ensure to use a greater portion of the funds for its purpose in
fulfillment of my last wish. Furthermore you will never have any problem
with the law as you will only pay some amount to the government as tax and
a minor percentage to settle the bill of the bank and the most major part
you will use to bless God's Children all over the world.

You are blessed.

Mrs. Tina Harry.

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

request

[Ted Anderson]

Hello I will like to place a quick order with you to my location here in Beirut,Lebanon.Please advice if you can have it shipped to me.In regards to shipping my order,i will advice the best and easy way to have my order shipped to me in-case you might want to have difficulties sending orders to my location.Please also advice if you accept visa or master credit card cause i will be paying with my credit card.Let me know soon so i can place my order right away.

 Sincerely 

Ted

request

[Ted Anderson]

Hello I will like to place a quick order with you to my location here in Beirut,Lebanon.Please advice if you can have it shipped to me.In regards to shipping my order,i will advice the best and easy way to have my order shipped to me in-case you might want to have difficulties sending orders to my location.Please also advice if you accept visa or master credit card cause i will be paying with my credit card.Let me know soon so i can place my order right away.

 Sincerely 


Ted

request

[Ted Anderson]

Hello I will like to place a quick order with you to my location here in Beirut,Lebanon.Please advice if you can have it shipped to me.In regards to shipping my order,i will advice the best and easy way to have my order shipped to me in-case you might want to have difficulties sending orders to my location.Please also advice if you accept visa or master credit card cause i will be paying with my credit card.Let me know soon so i can place my order right away.

 Sincerely 


Ted

request

[Parker Mortimer]

[-- Attachment #1: Type: text/plain, Size: 1 bytes --]



[-- Attachment #2: request.pdf --]
[-- Type: application/pdf, Size: 18241 bytes --]

[-- Attachment #3: Type: text/plain, Size: 184 bytes --]

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linux-foundation.org/mailman/listinfo/virtualization

request

[Walter T.Jerome]

[-- Attachment #1: Type: text/plain, Size: 1 bytes --]



[-- Attachment #2: request.pdf --]
[-- Type: application/pdf, Size: 18442 bytes --]

[-- Attachment #3: Type: text/plain, Size: 315 bytes --]

-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems?  Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >>  http://get.splunk.com/

[-- Attachment #4: Type: text/plain, Size: 140 bytes --]

_______________________________________________
NFS maillist  -  NFS@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nfs

request

[chinnu samy]

 
 

Urs,
                                                      R.Chinnu.

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

request

[黎志学]

hello,

	I request the mail list, thanks.

	best friend.
 		
		lizhixue
			5-11-28

REQUEST

[xiaojun]

Dear Sir/Madam,
I am Mr.Xiao Jun,managinig director of HUAMAO ARTS AND CRAFTS  
Import/Export Corp.(HMARTS) we are a group of business men who 
deal on Art and Craft and export into the Canada/America and 
Europe. 
We are searching for representatives who can help us establish a 
medium 
of getting to our customers in the Canada/America and Europe as 
well as making payments through you to us.Please if you are 
interested in transacting business with us we will be very glad. 
Please contact us for more information.Subject to your satisfaction 
you will be given the opportunity to negotiate your mode of which we 
will pay for your services as our representative in Canada/America 
and Europe Please if you are interested forward to us your phone 
number/fax and your full contact addresses. 
Thanks In advance 
Managing Director, 
Mr.Xiao Jun.


___________________________________________________________________________
Mail sent from WebMail service at the Tome of Wisdom and Power
- http://trekie8472.net

REQUEST......

[TAYO HARRISON]

								UNIVERSAL TECH.LTD	
								6 SOLOKI STREET ,		
								AGUDA SURULERE
								LAGOS .
								NIGERIA,
								TEL: 2348046117141


DEAR SIR,
I AM WRITING ON BEHALF OF THE ABOVE NAMED COMPANY AS THE MANAGING
DIRECTOR.
WE DEAL IN MARKETING OF GOODS ESPECIALLY TELECOMMUNICATIONS ,FABRICS
AND MANY OTHER PROFITABLE GOODS.

WE ALSO SERVE AS SOLE DISTRIBUTOR TO MANY MANUFACTURERS OVERSEA ,MARKETING ,DISTRIBUTING AND ADVERTISING THEIR GOODS AND SERVICES HERE IN OUR COUNTRY

WE HEREBY APPLY TO BE ONE OF YOUR DISTRIBUTOR ,MARKETER AND ADVERTISER TO YOUR GENUINE GOODS 
AND WE PROMISED A PROFITABLE BUSINESS FOR BOTH PARTIES

WE HAVE BEEN A SUCCESS SO FAR SO WE ARE EXTENDING OUR HAND IN BUSINESS TO YOU

WE WILL BE GLAD IF OUR REQUEST IF FAVOURABLY GRANTED.

THANK YOU.

YOURS SINCERELY,

OLADIMEJI HARRISON
FOR UNIVERSAL TECH.LTD.

Re: Alsa-devel digest, Vol 1 #810 - 3 msgs

[Bob McElrath]

[-- Attachment #1: Type: text/plain, Size: 2863 bytes --]

alsa-devel-request@lists.sourceforge.net [alsa-devel-request@lists.sourceforge.net] wrote:
> Date: Tue, 29 Oct 2002 08:55:06 +0100
> From: Benny Sjostrand <gorm@cucumelo.org>
> To: alsa-devel@lists.sourceforge.net
> Subject: [Alsa-devel] [PATCH] cs46xx, independant rear PCM channel, IEC958 PCM channel
> 
> This is a multi-part message in MIME format.
> --------------090804060704000507060108
> Content-Type: text/plain; charset=us-ascii; format=flowed
> Content-Transfer-Encoding: 7bit
> 
> Hi!
> 
> First, this stuff is still very experimental, it should work very well 
> with a
> Game Theater XP course that's card I've got and the only cs46xx sound 
> card I can
> test with.
> 
> I've got some reports that stuffs dont seems to work very well with
> the Santa Cruz card, course for some unknown reason the driver dont
> manage to raise GPIO 7 and 9 on the secondary codec that
> enables the rear output, you probably will see the message
> "cs46xx_setup_eapd_slot() Failure to write the GPIO pins for
> slot 12. " and that will probably freeze you computer
> for a while too.
> 
> In this patch, for the Santa Cruz the amplifier and the GPIO's are
> setup on init, then not touched anymore, like it's done for the
> Hercules XP card with hope and a little of luck maybe that
> works better.
> 
> Finally, this patch contains the following changes:
> - Rear PCM channel
> - IEC958 PCM channel, in hope that I'm close to get raw AC3 working soon
> - Turn on Amplifier and setup EGPIO for Santa Cruz card on init
> - Cleanup's in voyectra_setup_eapd_slot(...) (hope it's not broken ...)
> 
> PS. If you have time to help testing this patch, dont forget to turn on
> all debuging stuff, that always helps to find bugs ...

With a GTXP on an alpha. ;)

I managed to stall the codec by playing with the IEC958.  I turned the
IEC958 input all the way down, unmuted it, then unmuted the IEC958
output.  I was playing an mp3 at the time, and the mp3 stopped and the
codec just puts out a constant ~8khz tone.  This is repeatable.

The 3D Depth seems to work now, sounds great.  I don't think it worked
before... ;)

Playing 2 pcm inputs at the same time seems to work great.

Recording still seems to not work.  I still get about a 1Hz ticking in
the right channel when recording (no matter what the mixer settings).

I don't see a debug setting on the modules snd-cs46xx or snd -- is this
a compile time setting?  Anyway, let me know if you want me to send you
some debug output.

What is the easy way to test playing to the rear pcm channel?

Cheers,
-- Bob

Bob McElrath
Univ. of Wisconsin at Madison, Department of Physics

    "The surest way to corrupt a youth is to instruct him to hold in higher
    esteem those who think alike than those who think differently." 
        -- Nietzsche

[-- Attachment #2: Type: application/pgp-signature, Size: 240 bytes --]

Re: Re: Alsa-devel digest, Vol 1 #810 - 3 msgs

[Peter Heatwole]

On 2002.10.29 08:36 Bob McElrath wrote:
> I don't see a debug setting on the modules snd-cs46xx or snd -- is
> this a compile time setting?

    Yes, you set this when you configure the package.  Use the configure
option "--with-debug=detect" for the most verbose debugging output.


> What is the easy way to test playing to the rear pcm channel?

The easy way:  aplay -Dhw:0,1 test.wav

    Just don't forget to unmute and raise the volume for the rear-output.
Also, if you wish to output directly to SPDIF, use:  "aplay -Dhw:0,2".
    
Thanks for testing. ;-)

HTH,
-- Peter Heatwole
"Murphy was just a well known pessimist."



-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

Re: Re: Alsa-devel digest, Vol 1 #810 - 3 msgs

[Bob McElrath]

[-- Attachment #1: Type: text/plain, Size: 1495 bytes --]

Peter Heatwole [peter599@gotnet.net] wrote:
> On 2002.10.29 08:36 Bob McElrath wrote:
> >I don't see a debug setting on the modules snd-cs46xx or snd -- is
> >this a compile time setting?
> 
>    Yes, you set this when you configure the package.  Use the configure
> option "--with-debug=detect" for the most verbose debugging output.
> 
> 
> >What is the easy way to test playing to the rear pcm channel?
> 
> The easy way:  aplay -Dhw:0,1 test.wav

Seems to work well.  The relevant mixer settings are PCM1 and Surround1
(both of which must be turned up and unmuted.  However it doesn't seem
to deal well with odd rates:

(0)<mcelrath@draal:/home/mcelrath> aplay -Dhw:0,1 /usr/share/sounds/zipper.wav 
Playing WAVE '/usr/share/sounds/zipper.wav' : Unsigned 8 bit, Rate 11025 Hz, Mono
aplay: pcm_write:968: write error: Input/output error

>    Just don't forget to unmute and raise the volume for the rear-output.
> Also, if you wish to output directly to SPDIF, use:  "aplay -Dhw:0,2".

Unfortunately I don't have any hardware which can deal with SPDIF
(except my Marvel TV card which only has an output).

> Thanks for testing. ;-)

No prob.

> HTH,

Have The Ham?

Cheers,
-- Bob

Bob McElrath (rsmcelrath@students.wisc.edu) 
Univ. of Wisconsin at Madison, Department of Physics

    "The surest way to corrupt a youth is to instruct him to hold in higher
    esteem those who think alike than those who think differently." 
        -- Nietzsche

[-- Attachment #2: Type: application/pgp-signature, Size: 240 bytes --]

Re: Re: Alsa-devel digest, Vol 1 #810 - 3 msgs

[Benny Sjostrand]

>
>
>Seems to work well.  The relevant mixer settings are PCM1 and Surround1
>(both of which must be turned up and unmuted.  However it doesn't seem
>to deal well with odd rates:
>
>(0)<mcelrath@draal:/home/mcelrath> aplay -Dhw:0,1 /usr/share/sounds/zipper.wav 
>Playing WAVE '/usr/share/sounds/zipper.wav' : Unsigned 8 bit, Rate 11025 Hz, Mono
>aplay: pcm_write:968: write error: Input/output error
>  
>

Hm.,, just weird, does it work OK with the fron channel (hw:0,0) ???

What do get on dmesg output ???

/Benny




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

Re: Re: Alsa-devel digest, Vol 1 #810 - 3 msgs

[Bob McElrath]

[-- Attachment #1: Type: text/plain, Size: 2249 bytes --]

Benny Sjostrand [gorm@cucumelo.org] wrote:
> >
> >
> >Seems to work well.  The relevant mixer settings are PCM1 and Surround1
> >(both of which must be turned up and unmuted.  However it doesn't seem
> >to deal well with odd rates:
> >
> >(0)<mcelrath@draal:/home/mcelrath> aplay -Dhw:0,1 
> >/usr/share/sounds/zipper.wav Playing WAVE '/usr/share/sounds/zipper.wav' : 
> >Unsigned 8 bit, Rate 11025 Hz, Mono
> >aplay: pcm_write:968: write error: Input/output error
> > 
> 
> Hm.,, just weird, does it work OK with the fron channel (hw:0,0) ???
> 
> What do get on dmesg output ???

The relevant stuff is:
Oct 29 23:52:11 draal kernel: ALSA dsp_spos_scb_lib.c:1188: dsp_spos: creating SRC "SrcTask_SCB0"
Oct 29 23:52:11 draal kernel: ALSA dsp_spos_scb_lib.c:295: dsp_spos: creating SCB <SrcTask_SCB0>
Oct 29 23:52:11 draal kernel: ALSA dsp_spos_scb_lib.c:1355: dsp_spos: setting SRC rate to 44100
Oct 29 23:52:11 draal kernel: ALSA dsp_spos_scb_lib.c:1211: dsp_spos: creating PCM "PCMReader_SCB0" (1)
Oct 29 23:52:11 draal kernel: ALSA dsp_spos_scb_lib.c:295: dsp_spos: creating SCB <PCMReader_SCB0>
Oct 29 23:52:11 draal kernel: ALSA dsp_spos_scb_lib.c:1355: dsp_spos: setting SRC rate to 11025
Oct 29 23:52:21 draal kernel: ALSA dsp_spos_scb_lib.c:231: cs46xx_dsp_proc_free_scb_desc: freeing PCMReader_SCB0
Oct 29 23:52:21 draal kernel: ALSA dsp_spos_scb_lib.c:231: cs46xx_dsp_proc_free_scb_desc: freeing SrcTask_SCB0

Why does it set 44.1kHz first and then set it to 11kHz?

I hear the first piece (frag?) of the sample played repeatedly, as if it
were not servicing interrupts...

Messages for the 2nd pcm channel are identical if you s/(1)/(2)/ above.

As to the recording problem, I have tried all the options I can think
of, all the mixer settings and possible inputs, and I still get ticking.
NO messages are written to the logs during the record.
    arecord -d 2 -f cd blah.wav
I have placed this file here: http://mcelrath.org/blah.wav.bz2

Cheers,
-- Bob

Bob McElrath
Univ. of Wisconsin at Madison, Department of Physics

    "The surest way to corrupt a youth is to instruct him to hold in higher
    esteem those who think alike than those who think differently." 
        -- Nietzsche

[-- Attachment #2: Type: application/pgp-signature, Size: 240 bytes --]

request

[shiva shankar]

Can anyone send me the alsa design document.  I am interested in developing
a ALSA driver.

Thank you,
Shiva




-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf

REQUEST.....

[SMITH HARRISON]

								TOOSHTECH NIG LTD
								6 SOLOKI STREET
								AGUDA SURULERE 
								LAGOS 
								NIGERIA.		

DEAR SIR,

I HEREBY WRITE AS THE MANAGING DIRECTOR OF THE ABOVE COMPANY.

WE ARE HEREBY REQUESTING TO BE ONE OF YOUR MARKETERS AND SALES DISTRIBUTORS .

WE ARE MARKETERS OF COMMUNICATION EQUIPMENTS AND WE ARE VERY GOOD AND RELIABLE AT DOING THIS.

DUE TO THE HIGH DEMAND FOR GSM MOBILE PHONES IN OUR COUNTRY. WE STAND TO MAKE A VERY GOOD AND PROFITABLE BUSINESS WITH YOUR COMPANY SUPPLING US GSM PHONES AT A VERY PROFITABLE RATE.

WE PROMISE A VERY GOOD AND PROFITABLE OUTCOME FOR BOTH PARTIES

THANK YOU FOR YOUR COOPERATION .

YOURS FAITHFULLY
SMITH HARRISON

FOR TOOSHTECH NIG LTD