All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anders Karlsson <anders.karlsson@meansolutions.com>
To: linux-kernel@vger.kernel.org
Subject: Spacewalker SS40
Date: Sun, 30 Jun 2002 16:15:10 +0100	[thread overview]
Message-ID: <20020630151510.GA21888@alien.meansolutions.com> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 1111 bytes --]

Hello,

I have very recently bought a Shuttle SS40 and I have installed Debian
Woody on it. During the install process everything works fine, and the
machine installs nicely. Then I started adding a few of the things I
like in all systems, like a 2.4 kernel for example. 

Debian Woody have 2.4.16 and 2.4.18 up for grabs, and I have tried
both. The problem with the 2.4 kernels seems to be that PCI does not
get recognised or enabled. Hence things like networking, USB and
IEEE1394 becomes unusable.

I have tried to get 2.4.19-rc1 installed, but as that does not compile
for various reasons I have not yet been able to test it.

Please find attached the output from /proc/pci, the output from lspci,
lspci -v as well as the output from dmesg when I boot the 2.4.18-k7
kernel.

Should any other details be required, let me know. I do not subscribe
to the list, so I will look in the archives for responses but would
appreciate it if I was CC'd.

Looking forward to hearing what the cause of the problem might be.

-- 
Anders Karlsson <anders dot karlsson at meansolutions dot com>


[-- Attachment #1.2: proc.pci.txt --]
[-- Type: text/plain, Size: 3268 bytes --]

PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Silicon Integrated Systems Unknown device (rev 1).
      Vendor id=1039. Device id=740.
      Medium devsel.  Master Capable.  Latency=32.  
      Non-prefetchable 32 bit memory at 0xe8000000 [0xe8000000].
  Bus  0, device   1, function  0:
    PCI bridge: Silicon Integrated Systems 5591/5592 AGP (rev 0).
      Fast devsel.  Master Capable.  Latency=99.  Min Gnt=12.
  Bus  0, device   2, function  0:
    ISA bridge: Silicon Integrated Systems 85C503 (rev 0).
      Medium devsel.  Master Capable.  No bursts.  
  Bus  0, device   2, function  2:
    USB Controller: Silicon Integrated Systems 7001 USB (rev 7).
      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master Capable.  Latency=32.  Max Lat=80.
      Non-prefetchable 32 bit memory at 0xec100000 [0xec100000].
  Bus  0, device   2, function  3:
    USB Controller: Silicon Integrated Systems 7001 USB (rev 7).
      Medium devsel.  Fast back-to-back capable.  IRQ 9.  Master Capable.  Latency=32.  Max Lat=80.
      Non-prefetchable 32 bit memory at 0xec101000 [0xec101000].
  Bus  0, device   2, function  5:
    IDE interface: Silicon Integrated Systems 85C5513 (rev 208).
      Fast devsel.  Master Capable.  Latency=128.  
      I/O at 0x4000 [0x4001].
  Bus  0, device  10, function  0:
    Multimedia audio controller: Unknown vendor Unknown device (rev 16).
      Vendor id=13f6. Device id=111.
      Medium devsel.  IRQ 10.  Master Capable.  Latency=32.  Min Gnt=2.Max Lat=24.
      I/O at 0xe000 [0xe001].
  Bus  0, device  11, function  0:
    USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 80).
      Medium devsel.  IRQ 11.  Master Capable.  Latency=32.  
      I/O at 0xe400 [0xe401].
  Bus  0, device  11, function  1:
    USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 80).
      Medium devsel.  IRQ 12.  Master Capable.  Latency=32.  
      I/O at 0xe800 [0xe801].
  Bus  0, device  11, function  2:
    USB Controller: VIA Technologies Unknown device (rev 81).
      Vendor id=1106. Device id=3104.
      Medium devsel.  IRQ 5.  Master Capable.  Latency=32.  
      Non-prefetchable 32 bit memory at 0xec102000 [0xec102000].
  Bus  0, device  15, function  0:
    Ethernet controller: Realtek 8139 (rev 16).
      Medium devsel.  Fast back-to-back capable.  IRQ 11.  Master Capable.  Latency=32.  Min Gnt=32.Max Lat=64.
      I/O at 0xec00 [0xec01].
      Non-prefetchable 32 bit memory at 0xec103000 [0xec103000].
  Bus  0, device  16, function  0:
    FireWire (IEEE 1394): Lucent (ex-AT&T) Microelectronics Unknown device (rev 4).
      Vendor id=11c1. Device id=5811.
      Medium devsel.  Fast back-to-back capable.  IRQ 12.  Master Capable.  Latency=32.  Min Gnt=12.Max Lat=24.
      Non-prefetchable 32 bit memory at 0xec104000 [0xec104000].
  Bus  1, device   0, function  0:
    VGA compatible controller: Silicon Integrated Systems Unknown device (rev 0).
      Vendor id=1039. Device id=6325.
      Medium devsel.  Fast back-to-back capable.  BIST capable.  
      Prefetchable 32 bit memory at 0xe0000000 [0xe0000008].
      Non-prefetchable 32 bit memory at 0xec000000 [0xec000000].
      I/O at 0xd000 [0xd001].

[-- Attachment #1.3: lspci.txt --]
[-- Type: text/plain, Size: 970 bytes --]

00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0740 (rev 01)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
00:02.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:02.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
00:0a.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:0b.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50)
00:0b.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50)
00:0b.2 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev 51)
00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
00:10.0 FireWire (IEEE 1394): Lucent Microelectronics: Unknown device 5811 (rev 04)
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]: Unknown device 6325

[-- Attachment #1.4: lspci-v.txt --]
[-- Type: text/plain, Size: 3482 bytes --]

00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device 0740 (rev 01)
	Subsystem: Silicon Integrated Systems [SiS]: Unknown device 0740
	Flags: bus master, medium devsel, latency 32
	Memory at e8000000 (32-bit, non-prefetchable)
	Capabilities: [c0] AGP version 2.0

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 99
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: ec000000-ec0fffff
	Prefetchable memory behind bridge: e0000000-e7ffffff

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513
	Flags: bus master, medium devsel, latency 0

00:02.2 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
	Subsystem: Silicon Integrated Systems [SiS] 7001
	Flags: bus master, medium devsel, latency 32, IRQ 11
	Memory at ec100000 (32-bit, non-prefetchable)

00:02.3 USB Controller: Silicon Integrated Systems [SiS] 7001 (rev 07) (prog-if 10 [OHCI])
	Subsystem: Silicon Integrated Systems [SiS] 7001
	Flags: bus master, medium devsel, latency 32, IRQ 9
	Memory at ec101000 (32-bit, non-prefetchable)

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
	Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
	Flags: bus master, fast devsel, latency 128
	I/O ports at 4000

00:0a.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device f440
	Flags: bus master, medium devsel, latency 32, IRQ 10
	I/O ports at e000
	Capabilities: [c0] Power Management version 2

00:0b.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at e400
	Capabilities: [80] Power Management version 2

00:0b.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 50) (prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Flags: bus master, medium devsel, latency 32, IRQ 12
	I/O ports at e800
	Capabilities: [80] Power Management version 2

00:0b.2 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev 51) (prog-if 20)
	Subsystem: Unknown device 0925:1234
	Flags: bus master, medium devsel, latency 32, IRQ 5
	Memory at ec102000 (32-bit, non-prefetchable)
	Capabilities: [80] Power Management version 2

00:0f.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at ec00
	Memory at ec103000 (32-bit, non-prefetchable)

00:10.0 FireWire (IEEE 1394): Lucent Microelectronics: Unknown device 5811 (rev 04) (prog-if 10 [OHCI])
	Subsystem: Holco Enterprise Co, Ltd/Shuttle Computer: Unknown device f024
	Flags: bus master, medium devsel, latency 32, IRQ 12
	Memory at ec104000 (32-bit, non-prefetchable)
	Capabilities: [44] Power Management version 2

01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]: Unknown device 6325 (prog-if 00 [VGA])
	Subsystem: Silicon Integrated Systems [SiS]: Unknown device 6325
	Flags: 66Mhz, medium devsel
	BIST result: 00
	Memory at e0000000 (32-bit, prefetchable)
	Memory at ec000000 (32-bit, non-prefetchable)
	I/O ports at d000
	Capabilities: [40] Power Management version 2
	Capabilities: [50] AGP version 2.0


[-- Attachment #1.5: dmesg.boot2.4.18-k7.txt --]
[-- Type: text/plain, Size: 8390 bytes --]

Linux version 2.4.18-k7 (root@shuttle) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Sat Jun 29 17:36:29 BST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
 BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS)
 BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
found SMP MP-table at 000f49b0
hm, page 000f4000 reserved twice.
hm, page 000f5000 reserved twice.
hm, page 000f1000 reserved twice.
hm, page 000f2000 reserved twice.
On node 0 totalpages: 122864
zone(0): 4096 pages.
zone(1): 118768 pages.
zone(2): 0 pages.
Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Processor #0 Pentium(tm) Pro APIC version 17
I/O APIC #2 Version 17 at 0xFEC00000.
Processors: 1
Kernel command line: auto BOOT_IMAGE=Linux ro root=306
Initializing CPU#0
Detected 1593.231 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3178.49 BogoMIPS
Memory: 479492k/491456k available (796k kernel code, 11580k reserved, 208k data, 212k init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:             Common caps: 0383fbff c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1900+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-12, 2-21, 2-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................

IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.... register #01: 00178014
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0014
 WARNING: unexpected IO-APIC, please mail
          to linux-smp@vger.kernel.org
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 000 00  1    0    0   0   0    0    0    00
 06 001 01  0    0    0   0   0    1    1    51
 07 001 01  0    0    0   0   0    1    1    59
 08 001 01  0    0    0   0   0    1    1    61
 09 000 00  1    0    0   0   0    0    0    00
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 000 00  1    0    0   0   0    0    0    00
 0d 001 01  0    0    0   0   0    1    1    69
 0e 001 01  0    0    0   0   0    1    1    71
 0f 001 01  0    0    0   0   0    1    1    79
 10 001 01  1    1    0   1   0    1    1    81
 11 001 01  1    1    0   1   0    1    1    89
 12 001 01  1    1    0   1   0    1    1    91
 13 001 01  1    1    0   1   0    1    1    99
 14 001 01  1    1    0   1   0    1    1    A1
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 001 01  1    1    0   1   0    1    1    A9
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1593.2385 MHz.
..... host bus clock speed is 265.5396 MHz.
cpu: 0, clocks: 2655396, slice: 1327698
CPU0<T0:2655392,T1:1327680,D:14,S:1327698,C:2655396>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb360, last bus=1
PCI: System does not support PCI
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2396 blocks [1 disk] into ram disk... |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\bdone.
Freeing initrd memory: 2396k freed
VFS: Mounted root (cramfs filesystem).
Journalled Block Device driver loaded
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
hda: MAXTOR 6L080J4, ATA DISK drive
hdc: PLEXTOR CD-R PX-320A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=155114/16/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [9732/255/63] p1 p2 < p5 p6 p7 p8 p9 p10 >
cramfs: wrong magic
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=2
Freeing unused kernel memory: 212k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Adding Swap: 506008k swap-space (priority -1)
Real Time Clock Driver v1.10e
LVM version 1.0.1-rc4(ish)(03/10/2001) module loaded
hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
cdrom: open failed.
VFS: Disk change detected on device ide1(22,0)
loop: loaded (max 8 devices)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:43:33 Jun 29 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 17:43:33 Jun 29 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
usb.c: deregistering driver usbdevfs
usb.c: deregistering driver hub

[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]

             reply	other threads:[~2002-06-30 15:12 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-06-30 15:15 Anders Karlsson [this message]
2002-06-30 19:57 ` Spacewalker SS40 Ben Greear
2002-07-01  7:15   ` Anders Karlsson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20020630151510.GA21888@alien.meansolutions.com \
    --to=anders.karlsson@meansolutions.com \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.