From: Jeff Dike <jdike@karaya.com>
To: torvalds@transmeta.com
Cc: linux-kernel@vger.kernel.org, jdike@karaya.com
Subject: [PATCH] UML - part 2 of 3
Date: Sun, 28 Jul 2002 11:34:00 -0500 [thread overview]
Message-ID: <200207281634.LAA06306@ccure.karaya.com> (raw)
This patch (against 2.5.29) contains all of the changes to generic code
needed by UML. Per the first part of this set, include/linkage.h is no
longer changed by UML.
CREDITS -
Changes my address and adds a UML credit for Lars Brinkoff.
MAINTAINERS -
Adds a UML entry.
Makefile -
When ARCH=um is on the command line to do a UML build, the old value
of ARCH is saved in $(SUBARCH) for the later use of the UML build.
drivers/char/Makefile -
Sets KEYMAP, KEYBD, CONSOLE empty to prevent hardware drivers from
being compiled in.
drivers/net/setup.c -
Backs out a UML hook which leaked into your tree which UML no
longer uses.
init/do_mounts.c -
Adds a set of entries to dev_name_struct for the UML block device.
Jeff
diff -Naur orig/CREDITS linus/CREDITS
--- orig/CREDITS Sat Jul 27 21:52:33 2002
+++ linus/CREDITS Sun Jul 28 00:35:55 2002
@@ -433,6 +433,7 @@
E: lars@nocrew.org
W: http://lars.nocrew.org/
D: dsp56k device driver
+D: ptrace proxy in user mode kernel port
S: Kopmansg 2
S: 411 13 Goteborg
S: Sweden
@@ -725,7 +726,7 @@
E: jdike@karaya.com
W: http://user-mode-linux.sourceforge.net
D: User mode kernel port
-S: RR1 Box 67C
+S: 375 Tubbs Hill Rd
S: Deering NH 03244
S: USA
diff -Naur orig/MAINTAINERS linus/MAINTAINERS
--- orig/MAINTAINERS Tue Jul 16 23:55:50 2002
+++ linus/MAINTAINERS Thu Jul 25 18:49:30 2002
@@ -1849,6 +1849,14 @@
L: linux-usb-devel@lists.sourceforge.net
S: Maintained
+USER-MODE LINUX
+P: Jeff Dike
+M: jdike@karaya.com
+L: user-mode-linux-devel@lists.sourceforge.net
+L: user-mode-linux-user@lists.sourceforge.net
+W: http://user-mode-linux.sourceforge.net
+S: Maintained
+
VFAT FILESYSTEM:
P: Gordon Chaffee
M: chaffee@cs.berkeley.edu
diff -Naur orig/Makefile linus/Makefile
--- orig/Makefile Sat Jul 27 21:52:33 2002
+++ linus/Makefile Sun Jul 28 00:35:55 2002
@@ -27,7 +27,15 @@
KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
-ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
+# SUBARCH tells the usermode build what the underlying arch is. That is set
+# first, and if a usermode build is happening, the "ARCH=um" on the command
+# line overrides the setting of ARCH below. If a native build is happening,
+# then ARCH is assigned, getting whatever value it gets normally, and
+# SUBARCH is subsequently ignored.
+
+SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)
+ARCH := $(SUBARCH)
+
KERNELPATH=kernel-$(shell echo $(KERNELRELEASE) | sed -e "s/-//g")
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
diff -Naur orig/drivers/char/Makefile linus/drivers/char/Makefile
--- orig/drivers/char/Makefile Thu Jul 25 12:31:26 2002
+++ linus/drivers/char/Makefile Thu Jul 25 17:07:06 2002
@@ -65,6 +65,12 @@
endif
endif
+ifeq ($(ARCH),um)
+ KEYMAP =
+ KEYBD =
+ CONSOLE =
+endif
+
ifeq ($(ARCH),sh)
KEYMAP =
KEYBD =
diff -Naur orig/drivers/net/setup.c linus/drivers/net/setup.c
--- orig/drivers/net/setup.c Sat Jul 21 21:26:53 2001
+++ linus/drivers/net/setup.c Wed Jul 10 15:40:57 2002
@@ -28,7 +28,6 @@
extern int lmc_setup(void);
extern int madgemc_probe(void);
-extern int uml_net_probe(void);
/* Pad device name to IFNAMSIZ=16. F.e. __PAD6 is string of 9 zeros. */
#define __PAD6 "\0\0\0\0\0\0\0\0\0"
@@ -102,9 +101,6 @@
*/
#ifdef CONFIG_MADGEMC
{madgemc_probe, 0},
-#endif
-#ifdef CONFIG_UML_NET
- {uml_net_probe, 0},
#endif
{NULL, 0},
diff -Naur orig/init/do_mounts.c linus/init/do_mounts.c
--- orig/init/do_mounts.c Sat Jul 27 21:52:34 2002
+++ linus/init/do_mounts.c Sun Jul 28 00:35:56 2002
@@ -156,6 +156,22 @@
{ "pf", 0x2f00 },
{ "apblock", APBLOCK_MAJOR << 8},
{ "ddv", DDV_MAJOR << 8},
+ { "ubd0", UBD_MAJOR << 8 | 0 << 4},
+ { "ubda", UBD_MAJOR << 8 | 0 << 4},
+ { "ubd1", UBD_MAJOR << 8 | 1 << 4},
+ { "ubdb", UBD_MAJOR << 8 | 1 << 4},
+ { "ubd2", UBD_MAJOR << 8 | 2 << 4},
+ { "ubdc", UBD_MAJOR << 8 | 2 << 4},
+ { "ubd3", UBD_MAJOR << 8 | 3 << 4},
+ { "ubdd", UBD_MAJOR << 8 | 3 << 4},
+ { "ubd4", UBD_MAJOR << 8 | 4 << 4},
+ { "ubde", UBD_MAJOR << 8 | 4 << 4},
+ { "ubd5", UBD_MAJOR << 8 | 5 << 4},
+ { "ubdf", UBD_MAJOR << 8 | 5 << 4},
+ { "ubd6", UBD_MAJOR << 8 | 6 << 4},
+ { "ubdg", UBD_MAJOR << 8 | 6 << 4},
+ { "ubd7", UBD_MAJOR << 8 | 7 << 4},
+ { "ubdh", UBD_MAJOR << 8 | 7 << 4},
{ "jsfd", JSFD_MAJOR << 8},
#if defined(CONFIG_ARCH_S390)
{ "dasda", (DASD_MAJOR << MINORBITS) },
next reply other threads:[~2002-07-28 15:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-07-28 16:34 Jeff Dike [this message]
-- strict thread matches above, loose matches on Subject: below --
2002-08-03 3:40 [PATCH] UML - part 2 of 3 Jeff Dike
2002-08-13 17:05 Jeff Dike
2002-08-13 16:13 ` Linus Torvalds
2002-08-13 20:08 ` Jeff Dike
2002-08-13 19:26 ` Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200207281634.LAA06306@ccure.karaya.com \
--to=jdike@karaya.com \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@transmeta.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.