From: "Jürgen Braun" <jnbraun@web.de>
To: linux-smp@vger.kernel.org
Subject: APIC error
Date: Thu, 1 Aug 2002 22:14:22 +0200 [thread overview]
Message-ID: <200208012014.g71KELX20927@mailgate5.cinetic.de> (raw)
Hi
I've a problem with APIC on my Gigabyte 586DX SMP-System with two P166MMX and Kernel 2.4.18 and 2.4.19-rc3-ac3. When both CPU's are under load (e.g. compiling the Kernel) I get this message in syslog about every 5 - 10 sec:
APIC error on CPUX: YY(ZZ)
X is 0 or 1
YY is 02 or 08 (sometimes 04 or 0a)
ZZ is always 00
After I searched the archive of this list I found the following hints:
"not overclocking"
Well, the CPU's only run with 150MHz to make sure there are no problems with temperature. Or sould I put it in a refrigerator? ;)
Use Bootparameter "noapic" and/or "nmi_watchdog=0"
I tried it with "noapic" with "nmi_watchdog=0" and with both.
Well, this sounds a little bit strange to me, because even if I say "noapic" the error occurred.
I found a hint there could be a problem with the onboard AIC-7880 SCSI.
The error occur with an installation on a SCSI-Disk with IDE disabled and an installation on an IDE-Disk with SCSI disabled.
Nothing helps.
Please give me a hint how to fix this problem. Thanks
Juergen
P.S. I'm not a member of this list.
______________________________________________________________________________
FreeMail in der Premiumversion! Mit mehr Speicher, mehr Leistung, mehr
Erlebnis und mehr Praemie. Jetzt unter http://club.web.de/?mc=021105
next reply other threads:[~2002-08-01 20:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-01 20:14 Jürgen Braun [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-04-08 18:25 APIC error William E. Butler
2003-05-13 19:31 Rene Rebe
2003-05-14 12:55 ` mikpe
2003-05-14 20:18 ` Rene Rebe
2003-05-15 9:03 ` mikpe
2003-05-15 10:09 ` Jos Hulzink
2003-05-15 10:25 ` Rene Rebe
2004-03-24 23:26 Ed Westphal
2005-02-15 5:04 Bryan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200208012014.g71KELX20927@mailgate5.cinetic.de \
--to=jnbraun@web.de \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.