From: Benjamin LaHaise <bcrl@redhat.com>
To: linux-kernel@vger.kernel.org
Subject: ide in 2.5.30 is busted
Date: Fri, 2 Aug 2002 14:50:14 -0400 [thread overview]
Message-ID: <20020802145014.A29181@redhat.com> (raw)
2.5.29 and other kernels are fine on this crashbox, but 2.5.30 falls
over immediately after booting with:
hdb: ide_dma_intr: status=0x51 [ drive ready,seek complete,error]
hdb: ide_dma_intr: error=0x84 [ invalid checksum]
hdb: request error, nr. 1
and a complete lockup of userland. The hardware is a standard Dell
box running an SMP kernel, no preempt. IDE boot messages are below.
-ben
--
"You will be reincarnated as a toad; and you will be much happier."
ATA/ATAPI device driver v7.0.0
ATA: PCI bus speed 33.3MHz
ATA: Intel Corp. 82801AA IDE, PCI slot 00:1f.1
ATA: chipset rev.: 2
ATA: non-legacy mode: IRQ probe delayed
PIIX: Intel Corp. 82801AA IDE UDMA66 controller on pci00:1f.1
PCI: Setting latency timer of device 00:1f.1 to 64
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
PCI: Setting latency timer of device 00:1f.1 to 64
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: WDC WD100BB-75AUA1, DISK drive
hdb: WDC WD100BB-75AUA1, DISK drive
hdc: Lite-On LTN483S 48x Max, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 19541088 sectors w/2048KiB Cache, CHS=19386/16/63, UDMA(66)
hda: hda1 hda2
hdb: 19541088 sectors w/2048KiB Cache, CHS=19386/16/63, UDMA(66)
hdb: hdb1 hdb2 < hdb5 hdb6 >
hdc: ATAPI 48X CD-ROM drive, 120kB Cache, UDMA(33)
reply other threads:[~2002-08-02 18:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20020802145014.A29181@redhat.com \
--to=bcrl@redhat.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.