From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.maybe.net (sub27-133.member.dsl-only.net [63.105.27.133]) by dsl2.external.hp.com (Postfix) with SMTP id C04F84829 for ; Wed, 14 Aug 2002 10:13:07 -0600 (MDT) Date: Wed, 14 Aug 2002 09:13:06 -0700 From: Chris Jantzen To: parisc-linux@parisc-linux.org Message-ID: <20020814161306.GA1277@maybe.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Subject: [parisc-linux] 3c597/EISA status? Sender: parisc-linux-admin@lists.parisc-linux.org Errors-To: parisc-linux-admin@lists.parisc-linux.org List-Help: List-Post: List-Subscribe: , List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: I read in the mailing list (*after* I bought the cards ) that EISA support is probably not all their vis-a-vis a bus master card like the 3c597. What's the current status? Where can I help? I have a C180 with a couple 3c597's. Here's the relevant boot message: --- Wax at 0xffe00000 found. Wax: HIL Keyboard-NMI registered. Wax EISA Adapter found at 0xfc000000 EISA EEPROM at 0xffc88000 Enumerating EISA bus EISA slot 1 a configured board was not detected ( expected ___FFFF) Dino version 2.1 found at 0xf2000000 The GSCtoPCI (Dino hrev 1) bus converter found may exhibit data corruption. See Service Note Numbers: A4190A-01, A4191A-01. Systems shipped after Aug 20, 1997 will not exhibit this problem. Models affected: C180, C160, C160L, B160L, and B132L workstations. Dino: No PCI devices enabled. --- And I seem to get a kernel panic any time I probe the driver module... -- chris jantzen kb7rnl =-> __O Insert witty comment here. _`\<,_ http://www.maybe.net/ (*)/ (*)